Brand:

Festo CPE14-M1BH-5LS-QS-6 Solenoid Valve

Description

CPE14-M1BH-5LS-QS-6: 5/2-way, monostable solenoid valve, 14 mm wide

The Festo CPE14-M1BH-5LS-QS-6 (article 196913) is a 5/2-way, monostable piloted solenoid valve of the piston-gate design with soft sealing. Seven Star LLC supplies CPE14-M1BH-5LS-QS-6 in Oman and the GCC as an independent supplier in Muscat, not affiliated with the manufacturer. This page summarises the datasheet values, how the valve is selected and what we need for a quotation.

What the datasheet states about this variant:

  • CPE14 prefix: the 14 mm wide individual valve series on the datasheet.
  • Valve function stated on the sheet: 5/2-way, monostable.
  • Working ports: QS-6; flow 400 l/min (normalised to DIN 1343).
  • Pilot air supply: External.
  • Reset method: Pneumatic spring.

CPE14-M1BH-5LS-QS-6 technical specifications

Data from the manufacturer data sheet for article 196913.

Parameter Specification
Manufacturer / part number Festo / CPE14-M1BH-5LS-QS-6
Article number 196913
Valve function 5/2-way, monostable
Valve size / width 14 mm
Normal nominal flow rate (DIN 1343) 400 l/min
Nominal width 6 mm
Pneumatic working ports QS-6
Operating voltage 24V DC
Operating pressure -0.9 to 10 bar
Pilot air supply port External
Degree of protection IP65, With plug socket, As per IEC 60529
Switching time on 24 ms
Switching time off / changeover 32 ms
Duty cycle 100% in combination with holding current reduction
Coil characteristics 24 V DC: 1.28 W
Ambient and media temperature -5 °C to 50 °C
Electrical connection 2-pin
Mounting With through-hole
Housing material Die-cast aluminum
Seals material NBR
Certification listed c UL us – recognized (OL)

How the CPE14-M1BH-5LS-QS-6 works: pilot control and switching

In a 5/2 monostable valve one coil shifts the spool to one position and a mechanical spring or pneumatic spring returns it when power is removed, so the valve has one stable state. The valve is pilot-operated: the solenoid coil switches a small pilot stage and the pilot air then moves the main piston gate, which is why a coil rated 24 V DC, 1.28 W can control 400 l/min of flow.

Pilot air is external, with a pilot pressure window as stated in the table. Switching times of 24 ms on and 32 ms off or changeover set the upper limit for the cycle rate. Do not rely on the manual override for normal production; use it for commissioning and fault finding.

Where CPE14-M1BH-5LS-QS-6 fits: compatible and related parts

A valve like CPE14-M1BH-5LS-QS-6 drives one double-acting cylinder or actuator: ports 2 and 4 go to the two chambers, port 1 takes supply and 3 and 5 exhaust. Silencers or exhaust flow controls on 3 and 5 allow speed adjustment. Electrical plugs, coils and mounting or terminal strips are ordered as accessories according to the mounting options shown in the table.

Related valves handled by us include CPE14-M1BH-5/3B-1/8, CPE14-M1BH-5J-1/8, VUVG-L14-M52-MT-G18-1H2L-F1A, VUVG-L14-M52-M-G18-P1, VUVG-L14-P53E-T-G18-1R8L. They differ in valve function, flow, ports and approvals, so a replacement must be matched to the function and pressure range.

Selection and ordering checklist for CPE14-M1BH-5LS-QS-6

  • Function needed: 5/2-way, monostable.
  • Flow: 400 l/min normal nominal flow, check it against actuator volume and speed.
  • Operating voltage: 24V DC; permitted fluctuation as stated on the datasheet.
  • Pressure window -0.9 to 10 bar and pilot pressure as in the table.
  • Port type QS-6 and mounting method.
  • Ambient and media temperature: -5 °C to 50 °C.
  • External pilot air of 3 to 8 bar must be connected, so confirm the pilot supply is available at the installation.

Installation, commissioning and maintenance of CPE14-M1BH-5LS-QS-6

Mount the valve in any position using the through-hole or the terminal strip option listed; connect clean, dried air and keep ports 3 and 5 free to exhaust through silencers. Check the polarity and voltage of the coil plug and the degree of protection IP65 of the plug socket before powering.

At commissioning, actuate the valve with the manual override or a low pressure first, then set speed with flow controls on the cylinder. Common faults are low pilot pressure, dirty air that sticks the piston gate, and loose plugs. A spare coil or a spare valve is worth keeping for critical machines.

Typical applications of CPE14-M1BH-5LS-QS-6 in Oman and the GCC

Oman and the wider GCC put pneumatic equipment under demanding conditions: ambient heat in summer, fine desert dust, high humidity in coastal plants and compressed-air systems that are not always perfectly dried. A monostable 5/2 valve with push-in QS-6 working ports, ready for 6 mm tubing, and an external pilot air supply port, so the pilot air can be taken from a separate line rather than from the main supply.

Valves of this size are usually found inside machine cabinets and on skid-mounted pneumatic panels, where the IP65 rating and the -5 °C to 50 °C ambient range are normally comfortable but should be checked in sun-exposed enclosures.

CPE14-M1BH-5LS-QS-6 compared with other solenoid valves in this range

Function, flow and ports of CPE14-M1BH-5LS-QS-6 against the other valves listed from datasheets.

Part number Function Flow (normal) Working ports
CPE14-M1BH-5LS-QS-6 5/2-way, monostable 400 l/min QS-6
CPE14-M1BH-5/3B-1/8 5/3-way, pressurized 750 l/min G1/8
CPE14-M1BH-5J-1/8 5/2-way, bistable 800 l/min G1/8
VUVG-L14-M52-MT-G18-1H2L-F1A 5/2-way, monostable 730 l/min G1/8
VUVG-L14-M52-M-G18-P1 5/2-way, monostable 700 l/min to 780 l/min G1/8
VUVG-L14-P53E-T-G18-1R8L 5/3 exhausted 560 l/min G1/8

Information to send with your CPE14-M1BH-5LS-QS-6 RFQ

  • Full part number CPE14-M1BH-5LS-QS-6 and quantity.
  • Supply voltage and whether a plug with cable or LED is needed.
  • Operating pressure and the actuator it will drive.
  • Fitting thread or tube size.
  • Mounting: single valve or on terminal strip.
  • Environment and delivery location in Oman or the GCC.

Documents and quotation

The manufacturer data sheet for CPE14-M1BH-5LS-QS-6 is attached on this page for download.

Send the part number CPE14-M1BH-5LS-QS-6 with quantity and delivery location and we will confirm availability and a quotation. Seven Star LLC is an independent supplier and is not affiliated with the manufacturer.

Other Models in the Festo Cpe14 Solenoid Valve Range

Seven Star LLC supplies models from the Festo Cpe14 Solenoid Valve range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
Festo CPE14-M1BH-5LS-QS-6 Solenoid ValveSolenoid ValvesYou are viewing this model
Festo CPE14-M1BH-5/3B-1/8 Solenoid ValveSolenoid ValvesView details
Festo CPE14-M1BH-5J-1/8 Solenoid ValveSolenoid ValvesView details
Datasheets & Documents
  • PDF Datasheet Festo CPE14-M1BH-5LS-QS-6 Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Festo is a German maker of pneumatic and electric automation technology, founded in 1925 in Esslingen am Neckar by Albert Fezer and Gottlieb Stoll; the name comes from their surnames. It first made woodworking machines and power tools before moving into pneumatics in the 1950s. Festo is family-owned and still headquartered in Esslingen.

Seven Star LLC sources and supplies Festo cylinders, valves and valve terminals for machine maintenance and projects in Oman and the GCC.

Festo company profile

Founded 1925, Esslingen am Neckar, Germany
Founders Albert Fezer and Gottlieb Stoll
Name From FEzer and STOll
Headquarters Esslingen am Neckar
Ownership Family-owned
Product families DSBC and ADN pneumatic cylinders, VUVG and VTUG solenoid valves and valve terminals, MS series air preparation units, CPX-AP remote I/O, EMMT servo motors and CMMT servo drives, electric axes and grippers

Milestones

  • 1925: Fezer and Stoll found the company in Esslingen.
  • 1950s: Festo begins making pneumatic components.

Festo products listed

Two items show the two halves of a pneumatic circuit. The VTUG is a valve terminal: a manifold that carries a row of directional valves with common air supply and a shared electrical connection. The DSBC-32-100-PPVA-N3 is an ISO standard cylinder. Its type code reads as 32 mm piston diameter and 100 mm stroke, with adjustable end-position cushioning and a piston magnet for position sensing.

Festo products we list

Family Examples
Automation Accessories KMP3-9P-08-5 Connecting Cable, KMPYE-AIF-1-GS-GD-2 Cable
Pneumatic Cylinders ADN-100-30-A-P-A Compact Cylinder
Valve Actuators DSBC-32-100-PPVA-N3 ISO Cylinder
Pressure Instrumentation VPEV-1/8 Pressure Switch
Solenoid Valves VTUG Valve Terminal

Ordering Festo parts: what we need

Festo parts carry both a type code and a numeric part number on the label. Send both when you can; the part number is the shortest route to an exact match. For a cylinder give the full type code as on the listed DSBC example, plus mounting parts and proximity switches if required. For a VTUG valve terminal send the configuration code or a label photo: number of valve positions, valve functions, coil voltage and the electrical connection type all vary from one terminal to the next.

Facts checked against Festo's corporate history pages, October 2026.

FAQ

Questions about the Festo CPE14-M1BH-5LS-QS-6 Solenoid Valve

Answers from our engineering team on installation, compatibility and integration.

01What does the CPE14-M1BH-5LS-QS-6 do?
It is a 5/2-way, monostable solenoid valve with QS-6 working ports and a normal nominal flow of 400 l/min according to the datasheet.
02What operating pressure does the CPE14-M1BH-5LS-QS-6 need?
The datasheet lists an operating pressure of -0.9 to 10 bar, with pilot air external and a pilot pressure window as stated in the specification table.
03How fast does the CPE14-M1BH-5LS-QS-6 switch?
The datasheet gives 24 ms for switching on and 32 ms for switching off or changeover, which limits the achievable cycle rate.
04What electrical connection and protection does the CPE14-M1BH-5LS-QS-6 have?
Electrical connection: 2-pin. Degree of protection: IP65, With plug socket, As per IEC 60529.
05Can the CPE14-M1BH-5LS-QS-6 be used with vacuum or oil-lubricated air?
Operating medium is compressed air per ISO 8573-1:2010 [7:4:4]. Lubricated operation is possible but must then be continued. Check the datasheet pressure range before using it outside the stated window.