Magnet-Schultz FHMG + FHTS On-Off Hydraulic Solenoid
Overview
The Magnet-Schultz FHMG + FHTS is a tube-and-coil on-off hydraulic solenoid engineered for high-performance actuation of hydraulic and special valves in demanding industrial environments. Supplied as a two-part assembly – the FHMG pressure-tight tube and armature, paired with the FHTS coil – the FHMG + FHTS series is the current replacement for Magnet-Schultz’s earlier GHPY solenoid range, delivering the same robust push-type actuation with updated construction and documentation.
Seven Star LLC supplies the Magnet-Schultz FHMG + FHTS as an experienced supply partner of Magnet-Schultz, supporting hydraulic system integrators, valve manufacturers, and industrial maintenance teams across Muscat, Sohar, Salalah, and the wider Sultanate of Oman. Genuine Magnet-Schultz solenoids, coil assemblies, and plug connectors are available through Seven Star LLC for new hydraulic valve builds and field replacement programs throughout the GCC.
Measurement and Operating Principle
The FHMG + FHTS operates as a push-type electromagnetic actuator: energizing the FHTS coil generates a magnetic field that drives the armature within the pressure-tight FHMG tube, converting electrical current into linear mechanical force to shift the spool of a connected hydraulic or special valve. The solenoid delivers an increasing magnetic force versus stroke characteristic, meaning force output rises as the armature approaches full stroke, providing efficient operation and quick response times suited to on-off valve switching duties.
With overall stroke of 4–8mm and working stroke of 1.5–3.5mm depending on the coil diameter selected, the FHMG + FHTS is rated for a 100% duty cycle, allowing continuous energization without derating – an important characteristic for hydraulic circuits where the solenoid must remain actuated for extended periods. Nominal working pressure reaches up to 250 bar depending on model, with the pressure-tight armature tube isolating the electromagnetic coil from the hydraulic fluid circuit.
Engineering Design of the Magnet-Schultz FHMG + FHTS
The FHMG + FHTS is available in three coil diameters – 37mm, 45mm, and 63mm – allowing selection to match the force and pressure requirements of the connected valve. Class F thermal insulation on the FHTS coil supports continuous-duty operation under sustained electrical loading, while the assembly achieves protection ratings from IP65 up to IPX9K when correctly fitted with the Magnet-Schultz ZKBX-G plug connector, suiting both standard industrial environments and high-pressure washdown applications.
Fastening via a central thread allows the coil body to be replaced independently of the pressure tube without disturbing the hydraulic circuit or breaking hydraulic connections, simplifying field maintenance and reducing downtime during coil replacement. A manual override provides operational flexibility for manual valve actuation during commissioning, testing, or emergency operation, and the robust stainless steel and engineered polymer construction ensures compatibility with all neutral fluids commonly used in hydraulic systems.
Key Features
- Push-type on-off hydraulic solenoid, current replacement for the GHPY series
- Nominal working pressure up to 250 bar
- Available in 37mm, 45mm, and 63mm coil diameters
- Increasing magnetic force vs. stroke characteristic for efficient, fast response
- 100% duty cycle rating for continuous energization
- Protection class from IP65 to IPX9K with ZKBX-G plug connector
- Central-thread mounting allows coil replacement without disturbing the hydraulic circuit
- Manual override for commissioning and emergency operation
Industrial Applications
The FHMG + FHTS is used across hydraulic directional control valves, on-off shutoff valves, and special valve actuation in mobile and industrial hydraulic systems, including construction equipment, industrial presses, and process plant hydraulic power units. Its high-pressure rating and 100% duty cycle make it suited to demanding continuous-duty hydraulic circuits where reliable, repeatable on-off actuation is essential to safe and efficient equipment operation.
Across Oman’s industrial, oil and gas, and heavy equipment sectors, Seven Star LLC supports hydraulic system integrators and maintenance teams in Muscat, Sohar, and Salalah specifying the FHMG + FHTS for new valve assemblies and legacy GHPY replacement programs. As a trusted supplier of Magnet-Schultz products, Seven Star LLC provides genuine solenoid assemblies, plug connectors, and technical selection support for hydraulic actuation projects throughout the GCC.
Technical Specifications
| Model | Magnet-Schultz FHMG + FHTS (replaces GHPY) |
|---|---|
| Type | Push-type on-off hydraulic solenoid, tube and coil |
| Coil Diameters | 37mm, 45mm, 63mm |
| Nominal Working Pressure | Up to 250 bar |
| Overall Stroke | 4–8mm |
| Working Stroke | 1.5–3.5mm |
| Duty Cycle | 100% (continuous operation) |
| Insulation Class | Class F |
| Protection Rating | IP65 to IPX9K (with ZKBX-G connector) |
| Mounting | Central thread; independent coil replacement |
| Manual Override | Yes |
| Electrical Connection | Plug connector, type ZKBX-G |
Why Choose Seven Star LLC for Magnet-Schultz Hydraulic Solenoids
An on-off hydraulic solenoid only performs reliably when coil voltage, pressure rating, and duty cycle are correctly matched to your specific hydraulic circuit, since a solenoid running outside its rated duty cycle overheats and fails well before its expected service life. Seven Star LLC confirms the correct FHMG/FHTS configuration against your actual hydraulic system voltage and pressure requirements before order confirmation, drawing on our regional partnership for Magnet-Schultz hydraulic components across Oman and the wider GCC. We also support industrial and mobile hydraulic equipment operators across Muscat, Sohar, and Salalah with spare coil planning, so a single failed solenoid never takes a hydraulic system out of service for longer than necessary.
Request a Quote for Magnet-Schultz FHMG + FHTS On-Off Hydraulic Solenoid
Contact Seven Star LLC, an experienced supply partner for Magnet-Schultz in Oman and the GCC, for pricing, coil sizing, and connector selection support for the FHMG + FHTS on-off hydraulic solenoid. Our team supports hydraulic system integrators and maintenance teams across Muscat, Sohar, Salalah, and the wider Sultanate of Oman with genuine Magnet-Schultz solenoid technology.
Related Products
Magnet-Schultz product families
The manufacturer's groups are lift solenoids, rotary solenoids, holding magnets, shotbolt lock units, valve solenoids for hydraulics and for pneumatics, AC vibrators, LVDT displacement sensors, electronics, and devices in explosion-protected design to ATEX and IECEx. Type codes usually begin with G, for example GHPY and GRCY for hydraulic valve solenoids.Ordering Magnet-Schultz solenoids: what we need
Send every line of the nameplate: the type code, the voltage and whether it is AC or DC, the power or current, the duty cycle and the date code. Add the connector type and the make and model of the valve the solenoid sits on. Please note that D-87700 on a label is the Memmingen postal code, not a model number.Browse Magnet-Schultz products by category: Solenoid Valve, Control Valves.
Reviews
There are no reviews yet.