- Automation & ControlView all 2,610 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- HMI Displays
- Pneumatic Cylinders
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Schneider Electric
Schneider Electric XB4BW35G5 Orange Illuminated Push-Button
Description
XB4BW35G5: orange flush illuminated push-button, 110–120 V AC, 1 NO + 1 NC
The XB4BW35G5 is a Schneider Electric Harmony XB4 illuminated push-button for a 22 mm panel hole. It combines a spring-return orange flush head with a plain lens, an integral universal LED for 110 to 120 V AC at 50/60 Hz, a chromium-plated metal bezel and one normally open plus one normally closed contact. Seven Star LLC supplies the XB4BW35G5 in Oman and the GCC as an independent supplier based in Muscat, usually to panel builders and maintenance buyers who want the command and its status lamp in a single hole.
A reading of the code that agrees with the datasheet titles of the group, offered as our interpretation and not as the ordering table, is: XB4BW3 for the metal illuminated flush push-button, 5 for the orange lens, and G5 for the lamp supply of 110–120 V AC. The matrix below shows where this reference sits among its siblings.
Where an orange illuminated push-button belongs
Orange sits in the amber family and signals attention rather than alarm: a warning, a limit being approached, a standby state or an abnormal but tolerable condition. It is useful as the early warning that lights before a red trip lamp. For XB4BW35G5 the natural use is an attention-type command, for example override, hold or manual intervention, with the lamp showing the state.
Selection checklist and RFQ information for XB4BW35G5
Send the points below so that the part number can be confirmed against the datasheet and checked for availability in one reply.
- Part number XB4BW35G5 and the required quantity.
- The lamp circuit supply, here 110 to 120 V AC at 50/60 Hz.
- The lens colour (orange) and the function it will carry.
- Panel thickness at the hole, against the 1 to 6 mm clamping range.
- Rear clearance behind the panel, checked against the datasheet drawing.
- The contact load and circuit voltage the 1 NO + 1 NC block will switch.
- Any approval needed, for example marine, compared with the datasheet list.
- Delivery location in Oman or the GCC and the time you need.
How the XB4BW35G5 switches and lights
The head is spring return. The normally closed contact changes state after 1.5 mm of travel and the normally open contact after 2.6 mm, out of a total stroke of 4.3 mm, so on pressing, the NC circuit opens slightly before the NO circuit closes. The operating forces are 3.5 N and 3.8 N respectively, and contact operation is slow-break, which is normal for control-circuit buttons. Positive opening to IEC 60947-5-1 appendix K is listed for this part, meaning the NC contact is forced open mechanically even if it has welded, which matters in stop and interlock functions.
The lamp is a universal LED, integrated, so command and indication sit in one body. Supply limits are 100 to 132 V AC and the current consumption is 14 mA. The lamp circuit is separate from the contacts on the terminals, so check the schematic before wiring the lamp and the contact load from the same source.
Technical specifications of the XB4BW35G5
| Parameter | Specification |
|---|---|
| Manufacturer / part number | Schneider Electric / XB4BW35G5 |
| Range | Harmony XB4 |
| Product type | Illuminated push-button, spring return |
| Operator profile | Orange flush, plain lens |
| Bezel / fixing collar | Chromium plated metal / zamak |
| Mounting diameter | 22.5 mm |
| Contacts | 1 NO + 1 NC, slow-break |
| Positive opening | Provided (IEC 60947-5-1 appendix K) |
| Terminal marking (ISO) | (13-14)NO, (21-22)NC |
| Operating travel | 1.5 mm (NC changing electrical state); 2.6 mm (NO changing electrical state); 4.3 mm (total travel) |
| Operating force | 3.5 N NC changing electrical state / 3.8 N |
| Mechanical durability | 10 million cycles |
| Light source / bulb base | Universal LED / integral LED |
| Rated supply voltage [Us] | 110 to 120 V AC at 50/60 Hz |
| Supply voltage limits | 100 to 132 V AC |
| Current consumption | 14 mA |
| LED service life | 100000 h at rated voltage and 25 °C |
| Thermal current [Ith] | 10 A |
| Rated insulation voltage [Ui] | 600 V, pollution degree 3 |
| Rated impulse withstand [Uimp] | 6 kV |
| Rated operational current [Ie] | 3 A at 240 V, AC-15, A600; 6 A at 120 V, AC-15, A600; 0.1 A at 600 V, DC-13, Q600 |
| Short-circuit protection | 10 A gG cartridge fuse |
| Electrical durability | 1 million cycles, AC-15, 2 A at 230 V |
| Dimensions (H x W x D) | 47 mm high × 30 mm wide (depth: see drawing) |
| Net weight | 0.097 kg |
| Degree of protection | IP66, IP67, IP69, IP69K; UL type 4X/13; IK06 |
| Operating / storage temperature | -40 to 70 °C / -40 to 70 °C |
| Vibration / shock | 5 gn, 2–500 Hz / 30 gn 18 ms and 50 gn 11 ms |
| Certifications | CSA, LROS (Lloyd’s Register), BV, UL listed, DNV |
| Warranty | 18 months |
Typical uses of XB4BW35G5 in Oman and the GCC
Illuminated push-buttons like XB4BW35G5 appear on pump and compressor starters, crane and hoist stations, packaged skids and building service panels, where the operator needs the command and its status in the same place. In oil and gas, petrochemical, power and desalination plants they sit on local control stations and starter doors; the metal bezel copes with heat, dust and salt air on coastal sites.
The XB4BW3 group and how XB4BW35G5 fits
Colour and supply are the two selection axes, and the head, bezel and contact block are shared. This lane covers the combinations below, and the page you are reading is for XB4BW35G5.
| Colour digit | Lens colour | B5 (24 V AC/DC) | G5 (110–120 V AC) | M5 (230–240 V AC) |
|---|---|---|---|---|
| 1 | White | XB4BW31B5 | not in this group | XB4BW31M5 |
| 3 | Green | XB4BW33B5 | XB4BW33G5 | XB4BW33M5 |
| 4 | Red | XB4BW34B5 | not in this group | not in this group |
| 5 | Orange | XB4BW35B5 | XB4BW35G5 | XB4BW35M5 (also XB4BW3565, lamp not included) |
| 6 | Blue | XB4BW36B5 | XB4BW36G5 | XB4BW36M5 |
Mounting and terminal details of the XB4BW35G5
The XB4BW35G5 fits a 22.5 mm hole, and the drawing in the datasheet gives a clamping thickness of 1 to 6 mm. The body is 47 mm high and 30 mm wide and weighs 0.097 kg. The depth quoted in the text of the datasheet for this orange and blue group differs from the 57 mm quoted for the white, green and red references, so read the rear dimension from the drawing before you commit to a shallow door. Terminals are screw clamp, marked (13-14)NO, (21-22)NC, with a tightening torque of 0.8 to 1.2 N.m, and the datasheet allows up to two 1.5 mm² conductors with cable ends or from 0.22 to 2.5 mm² without.
Contact ratings, sealing and approvals of the XB4BW35G5
The contacts are silver alloy (Ag/Ni). The thermal current is 10 A, the insulation voltage 600 V at pollution degree 3 and the impulse withstand 6 kV. Operational ratings include 3 A at 240 V and 6 A at 120 V in AC-15, and 0.27 A at 250 V and 0.55 A at 125 V in DC-13, with a 10 A gG cartridge fuse for short-circuit protection. These are control-circuit ratings for relay coils, contactor coils and PLC inputs, not for motors.
Electrical life is quoted at 1 million cycles for 2 A at 230 V in AC-15, 3 A at 120 V and 4 A at 24 V, at fewer than 3600 operations an hour and a load factor of 0.5, and mechanical life is 10 million cycles.
The datasheet lists IP66, IP67, IP69, IP69K with UL type 4X/13 and IK06. Operating temperature is -40 to 70 °C and storage is -40 to 70 °C. Vibration resistance is 5 gn from 2 to 500 Hz, and shock figures are 30 gn for 18 ms and 50 gn for 11 ms.
The certifications listed are CSA, LROS (Lloyd’s Register), BV, UL listed, DNV. Accept this unit for marine work only against the project’s own approval requirement and the datasheet for this exact reference.
Documents and quotation
The Schneider Electric datasheet for the XB4BW35G5 is attached on this page for your technical file. It carries the electrical, mechanical and environmental data summarised above, together with the dimension and panel cut-out drawings.
To request a quotation, send the part number and quantity through the enquiry form and we will reply with availability and delivery terms. Seven Star LLC is an independent supplier and does not act for the manufacturer, so please check the datasheet against your project requirements before ordering.
Other Models in the Se Xb4bw Ipb Range
Seven Star LLC supplies models from the Se Xb4bw Ipb range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.
| Model | Category | |
|---|---|---|
| Schneider Electric XB4BW31B5 White Illuminated Push-Button | Automation Accessories | View details |
| Schneider Electric XB4BW31M5 White Illuminated Push-Button | Automation Accessories | View details |
| Schneider Electric XB4BW33B5 Green Illuminated Push-Button | Automation Accessories | View details |
| Schneider Electric XB4BW33G5 Green Illuminated Push-Button | Automation Accessories | View details |
| Schneider Electric XB4BW33M5 Green Illuminated Push-Button | Automation Accessories | View details |
| Schneider Electric XB4BW34B5 Red Illuminated Push-Button | Automation Accessories | View details |
| Schneider Electric XB4BW3565 Orange Illuminated Push-Button | Automation Accessories | View details |
| Schneider Electric XB4BW35B5 Orange Illuminated Push-Button | Automation Accessories | View details |
| Schneider Electric XB4BW35G5 Orange Illuminated Push-Button | Automation Accessories | You are viewing this model |
Datasheets & Documents
- Datasheet Schneider Electric XB4BW35G5 Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
Schneider Electric is the French group for energy management and industrial automation: low and medium voltage switchgear and circuit breakers, motor control, drives, PLCs, power monitoring, UPS systems and building management. Its history goes back to 1836, when the brothers Adolphe and Eugène Schneider took over the iron and steel works at Le Creusot in Burgundy. Over the 20th century the company left steel and heavy engineering and became an electrical group through acquisitions such as Merlin Gerin, Télémécanique, Square D and Modicon. Its head office is in Rueil-Malmaison near Paris, and its shares are listed on Euronext Paris.
Schneider Electric company profile
| Origins | 1836, Le Creusot, France: Adolphe and Eugène Schneider take over the Le Creusot foundry |
|---|---|
| Headquarters | Rueil-Malmaison (Paris region), France |
| Ownership | Public company listed on Euronext Paris |
| Key acquisitions | Télémécanique (1988), Square D (1991), Merlin Gerin (1992), Modicon (1997), APC (2007), Invensys (2014); majority owner of AVEVA software |
| Brand names still in use | Acti9, ComPacT and MasterPacT breakers, TeSys motor control, Altivar drives, Altistart soft starters, Modicon PLCs, Harmony control components, PowerLogic and Easergy protection and metering, APC UPS, EcoStruxure software platform |
| Product families | Low voltage distribution, medium voltage switchgear and protection relays, motor control and drives, PLCs and HMIs, power meters, UPS and cooling, enclosures, building automation and energy software |
Milestones
- 1836: The Schneider brothers acquire the Le Creusot works; the business grows in steel, locomotives and heavy engineering.
- 1975: First investment in Merlin Gerin, a French maker of electrical distribution equipment.
- 1988–1992: Télémécanique, Square D (USA) and Merlin Gerin join the group, making it an electrical specialist.
- 1997: Modicon, the company behind the first programmable logic controller, joins the group.
- 1999: The group takes the name Schneider Electric.
- 2007 and 2014: APC (UPS and data centre power) and Invensys (process automation) are acquired.
Choosing Schneider Electric breakers and motor control
Circuit breakers are chosen by current and breaking capacity. Acti9 miniature circuit breakers (iC60, C120) protect final circuits up to 125 A. ComPacT NSX molded case breakers cover about 16 to 630 A, and the letter after the frame size sets the breaking capacity: B, F, N, H, S, L from lowest to highest. MasterPacT air circuit breakers are used as main incomers on large switchboards. For motors, a TeSys contactor with an LRD overload relay or a GV2 motor circuit breaker suits direct starting, an Altistart soft starter reduces starting current, and an Altivar drive controls speed. The breaking capacity must always be at least the prospective short-circuit current at the point of installation.
Where Schneider Electric products are used
In Oman and the GCC, Schneider Electric equipment is found in main and sub-main switchboards of commercial and residential buildings, motor control centres in water, oil and gas and industrial plants, substations protected by Sepam and Easergy relays, data centres powered by Galaxy and APC UPS systems, and buildings controlled by EcoStruxure Building Operation.
APC by Schneider Electric: UPS and critical power
Since 2007, APC has been part of Schneider Electric and is now its product brand for uninterruptible power supplies, replacement batteries, battery packs, network management cards and rack power distribution. Our APC catalogue covers Smart-UPS line-interactive and on-line models, Easy UPS On-Line, the modular Symmetra LX, RM and PX ranges, Silcon three-phase systems and their spare part kits, and the RBC cartridges that keep them running. Schneider Electric breakers, drives and PLCs can be quoted together with APC UPS systems in one request.
Schneider Electric products we list
| Family | Examples |
|---|---|
| Circuit breakers | Acti9 iC60N, C120N, NSX100F, NSX250N, NSX630, EasyPact EZC, MasterPacT MTZ1, MasterPacT NW |
| Motor control | TeSys Deca LC1D, TeSys F, LRD overload relay, GV2ME08, Altistart 22, Altistart 480 |
| Drives | Altivar 12, Altivar 320, ATV340, Altivar Process 630, ATV930, Lexium 32 servo |
| PLCs, HMIs and relays | Modicon M221, M241, M580 BMEP582040, Zelio Logic, Magelis HMISTU655 |
| Protection, metering and power | Sepam series 20, Easergy P3U30, MiCOM P139, PM5560, iEM3255, Galaxy VS UPS |
Ordering Schneider Electric products: what we need
Send the commercial reference from the label (for example LC1D18M7 or ATV320U22N4C). For breakers, confirm the rated current, number of poles, breaking capacity and trip unit. For contactors, give the coil voltage. For drives, give the motor power and supply voltage. APC products are listed on their own brand page.
Facts checked against Schneider Electric's published company history, October 2026.
Browse Schneider Electric products by category: Circuit Breaker, Electrical & Power Modules, AC Drives, PLC & I/O Cards, Metering Systems, UPS and Batteries.
FAQ
Questions about the Schneider Electric XB4BW35G5 Orange Illuminated
Answers from our engineering team on installation, compatibility and integration.
01What lamp supply does the XB4BW35G5 use?
The datasheet lists 110 to 120 V AC at 50/60 Hz with limits of 100 to 132 V AC. It is an AC lamp circuit.
02What contacts does the XB4BW35G5 have?
One normally open and one normally closed contact, slow-break, with positive opening to IEC 60947-5-1 appendix K listed on the datasheet.
03What panel hole does the XB4BW35G5 need?
A round 22.5 mm hole, clamping thickness 1 to 6 mm per the datasheet drawing, terminals tightened to 0.8 to 1.2 N.m.
04What protection rating does the XB4BW35G5 list?
The datasheet lists IP66, IP67, IP69, IP69K, UL type 4X/13 and IK06, with operation from -40 to 70 °C.
05Does Seven Star LLC supply the XB4BW35G5 in Oman?
Yes, as an independent supplier in Muscat serving Oman and the GCC. Send the part number and quantity and we confirm availability and documents.


















Reviews
There are no reviews yet.