Brand:

Beamex 0809150 1000 bar Pressure Hose Set, 1 m, G Fittings

Description

Beamex 0809150 1000 bar pressure hose set (G fittings) overview

The Beamex 0809150 is a 1000 bar pressure hose set with a 1.0 m hose rated for 1000 bar (14,500 psi) at 80 C (176 F). It is fitted with a G1/4 inch male fitting for the PGHH pump and a G1/4 inch female fitting for high-pressure external modules (EXT60 to EXT1000) or the device under test.

Beamex also lists pressure fitting set 0809180, which contains various G1/4 inch male fittings that are compatible with this hose set.

This page describes Beamex 0809150 for buyers who need the exact order code. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer.

Key features of the 1000 bar pressure hose set (G fittings)

  • 1.0 m hose rated for 1000 bar / 14,500 psi at 80 C
  • G1/4 male fitting for the PGHH pump
  • G1/4 female fitting for EXT60 to EXT1000 modules or the device under test
  • Compatible with fitting set 0809180

Standard delivery and contents according to Beamex:

  • 1.0 m 1000 bar hose
  • G1/4 male fitting
  • G1/4 female fitting

Technical specifications of Beamex 0809150

Order code 0809150
Hose length 1.0 m
Rated pressure 1000 bar / 14,500 psi at 80 C / 176 F
Pump end G1/4 male (for PGHH)
Module / DUT end G1/4 female (EXT60 to EXT1000 or device under test)
Compatible fittings Pressure fitting set 0809180 (G1/4 male fittings)

All values are taken from Beamex documentation. Items not shown here are not stated in the manufacturer source and are therefore left out.

Typical applications in Oman and the GCC

Hoses and fittings are consumables in pressure calibration. They are connected and disconnected many times and are exposed to pressure cycles, so instrument teams in oil and gas, power, water and manufacturing sites across Oman and the GCC keep spares such as the 1000 bar pressure hose set (G fittings) (0809150) in the workshop.

Using a hose with the right rating and the right end fittings is essential for safe pressure calibration.

Selection and compatibility notes for 0809150

Match the rated pressure of the hose to your highest test pressure and confirm that the pump and reference module ends fit your equipment. 0809150 should only be used with equipment rated for the same pressure or higher.

Check the thread type at each end. Beamex lists many adapters, and a mismatch is the most common reason a hose cannot be used. Plan fittings together with the hose.

Installation and commissioning

Inspect the hose and the threads before use. Fit seals where the fitting requires them, tighten connections by hand or with the correct tool and never exceed the rated pressure.

Pressurize gradually and check for leaks at every connection. Release pressure fully before disconnecting. Follow the Beamex notes for 0809150.

Maintenance and care

Examine the hose regularly for cracks, kinks and damaged threads and replace it at the first sign of damage. Store it loosely coiled and away from heat and chemicals.

Keep spare seals, bonded washers and fittings with the hose to avoid downtime.

Related products and ordering notes

Beamex lists these related items, each with its own order code:

  • 0809160 1000 bar pressure hose set with NPT fittings
  • 0809180 pressure fitting set 1000 bar G1/4
  • 9010260 PGHH hydraulic calibration pump
  • 9010290 PGHS hydraulic calibration pump

Beamex is a Finnish maker of calibration equipment, and its manuals and product pages are the reference for every figure on this page. Always check the manufacturer’s current documentation before putting any accessory or spare part into service.

Seven Star LLC works with industrial maintenance, procurement and calibration teams, so requests that include the full order code, the quantity and the delivery location can be answered quickly. Order codes are often the only reliable way to separate similar-looking accessories from different product generations.

Plants in the region usually plan calibration work around shutdowns, turnarounds and seasonal maintenance windows. Ordering accessories and spare parts well before the work starts avoids waiting for a missing seal, hose or cable when the plant is already offline, and it is cheaper than expediting a single item at the last minute.

Good calibration practice also depends on traceability. Records of the reference equipment, its certificate, the environmental conditions and the as-found and as-left results are what auditors and clients ask for. Accessories do not replace the calibration of the reference itself, but a worn hose, a leaking seal or a damaged cable can spoil an otherwise good measurement, which is why consumables should be replaced on a schedule rather than only after a failure.

When you compare quotations, make sure the order code is identical. Calibration accessories from the same manufacturer often differ only by thread, length or pressure rating, and a similar-looking item with a different code may not be compatible with your equipment. Keep the code on the purchase order, the goods receipt note and the maintenance record so that the same item can be reordered later.

Frequently asked questions about 0809150

What is the pressure rating of the 0809150 hose? 1000 bar (14,500 psi) at 80 C (176 F), according to Beamex.

Which pump does it connect to? The G1/4 male fitting is for the Beamex PGHH pump.

Which modules can it connect? High-pressure external modules EXT60 to EXT1000, or a device under test, through the G1/4 female fitting.

Is there an NPT version? Yes. Beamex lists a 1000 bar hose set with NPT fittings under 0809160.

Are extra fittings available? Yes. Fitting set 0809180 contains various G1/4 male fittings compatible with this hose.

Documents and quotation

The official Beamex PG calibration pumps brochure is attached to this page as a PDF. Its pages on the high-pressure pumps (page 5) list the 1000 bar pressure hoses and fittings offered as optional accessories. Share order code 0809150 together with your calibrator model and we will confirm the exact part in a written quotation.

Quote Beamex 0809150 exactly as written when you contact us, so that the correct item is quoted the first time. Delivery to Oman and to other GCC countries is arranged for each order, and any questions about packaging, documentation or alternative items can be raised in the same message.

Datasheets & Documents
  • PDF Datasheet Beamex PG Calibration Pumps Brochure (official PDF) Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Beamex is a Finnish maker of calibration equipment and software for process instruments. Four calibration technicians founded the company in 1975 because they could not find the equipment they wanted; their first product was a voltage and current simulator, and the first factory opened in 1977. Beamex is headquartered in Pietarsaari (Jakobstad), Finland, and supplies process industries in more than 100 countries.

Seven Star LLC is an independent supplier listing Beamex documenting calibrators, temperature dry blocks, pressure controllers, calibration pumps and pressure modules for buyers in Oman and the GCC. Equipment is quoted against the model and the pressure or temperature ranges required.

Beamex company profile

Origin Founded in 1975 in Finland by four calibration technicians; first factory 1977
Headquarters Pietarsaari (Jakobstad), Finland; ISO 9001 certified since 1992
Product families MC series multifunction calibrators, temperature dry blocks, automatic and hand pressure generators, external pressure modules, CMX and LOGiCAL calibration software
Typical duty Field and workshop calibration of pressure, temperature and electrical signal instruments, including HART and fieldbus transmitters

Milestones

  • 1975: Four calibration technicians found the company in Finland.
  • 1977: The first factory opens.
  • 1992: ISO 9001 certification.

Beamex calibrators and accessories

Model Type Typical use
MC6 Advanced field calibrator and communicator Pressure, temperature and electrical calibration with a built-in HART, FOUNDATION Fieldbus and PROFIBUS PA communicator, documented results
MC6-Ex Intrinsically safe field calibrator Calibration inside Zone 0 and Zone 1 hazardous areas without a hot work permit
MC6-T Temperature calibrator with integrated dry block Temperature sensors and transmitters, with multifunction electrical and pressure measurement
MC4, MC2 Documenting and hand-held process calibrators Routine loop, transmitter and switch checks in the field
FB, MB Field and metrology temperature dry blocks FB for field calibration; MB for higher-accuracy workshop and laboratory work
ePG, POC8 Electric pressure pump and automatic pressure controller Automated pressure calibration; POC8 for workshop calibration benches
PGC, PGM, PGL, PGPH, PGHH Hand pressure pumps Pressure and vacuum generation in the field, from low pressure (PGL, ±400 mbar) to hydraulic 700 bar (PGHH)
EXT modules External pressure modules Extending MC calibrators to additional ranges, 70 kPa to 100 MPa

Where Beamex equipment is used

Instrument workshops and maintenance teams in oil and gas, refining, petrochemicals, power, water and pharmaceuticals use Beamex calibrators to verify transmitters, switches, gauges and temperature sensors. Documenting calibrators send results to calibration software, which keeps the audit trail required by quality systems and custody transfer metering procedures. Intrinsically safe models are used for in-situ calibration in classified areas.

Ordering Beamex equipment: what we need

State the model and the options you need: internal and external pressure ranges, temperature range, communication protocols (HART, FOUNDATION Fieldbus, PROFIBUS PA), Ex approval, and whether an accredited calibration certificate is required. For spare modules and pumps send the serial number of the calibrator they will be used with, so compatibility can be confirmed.

Facts checked against Beamex company history and product information, October 2026.

FAQ

Questions about the Beamex 0809150 1000 bar Pressure Hose Set, 1 m, G

Answers from our engineering team on installation, compatibility and integration.

01What is the pressure rating of the 0809150 hose?
1000 bar (14,500 psi) at 80 C (176 F), according to Beamex.
02Which pump does it connect to?
The G1/4 male fitting is for the Beamex PGHH pump.
03Which modules can it connect?
High-pressure external modules EXT60 to EXT1000, or a device under test, through the G1/4 female fitting.
04Is there an NPT version?
Yes. Beamex lists a 1000 bar hose set with NPT fittings under 0809160.
05Are extra fittings available?
Yes. Fitting set 0809180 contains various G1/4 male fittings compatible with this hose.