- Automation & ControlView all 2,810 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- Pneumatic Cylinders
- HMI Displays
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Beamex
Beamex 8003380 630 Bar Pressure Hose Set, 1 m with Fittings
Description
Overview of Beamex 630 bar pressure hose set 1 m with 1/4 inch fittings Beamex 8003380
The Beamex 8003380 is a 630 bar pressure hose set of 1.0 m with fittings. The hoses are rated for 630 bar (9100 psi) at 50 degrees C and have Bx 1215 female threads in the ends.
Hoses and fittings are among the parts that wear first in pressure calibration, so spares are held by most instrument workshops.
This page describes Beamex 630 bar pressure hose set 1 m with 1/4 inch fittings for buyers who need the exact part number Beamex 8003380. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer; the data below is taken from the manufacturer published product pages and brochures.
Key features of 8003380
- Order code: 8003380.
- Pressure rating: 630 bar / 9100 psi at 50 degrees C.
- Hose: 1.0 m 630 bar hose (7021390).
- Fitting 1: Bx 1215 male to G1/4 male (7108500) for the pressure source, for example a PGHH or PGPH pump.
- Fitting 2: Bx 1215 male to 1/4 NPT male (7108560) for a device under test.
Technical specifications for 8003380
| Order code | 8003380 |
|---|---|
| Pressure rating | 630 bar / 9100 psi at 50 degrees C |
| Hose | 1.0 m 630 bar hose (7021390) |
| Fitting 1 | Bx 1215 male to G1/4 male (7108500) for the pressure source, for example a PGHH or PGPH pump |
| Fitting 2 | Bx 1215 male to 1/4 NPT male (7108560) for a device under test |
All values above come from the manufacturer documentation and may change with later revisions. Please quote 8003380 when you need the matching datasheet or a confirmation of the current revision.
Typical applications in Oman and the GCC
Pressure calibration in the field depends on sound hoses and fittings between the pump, the calibrator and the instrument under test. Instrument technicians in Oman and the GCC use them on pressure transmitters, gauges and switches in oil and gas, water and power plants.
Wear, kinks and damaged threads are common after a campaign, so keeping spare hose sets in the kit prevents leaks from stopping a job.
The part is relevant wherever the related calibration equipment is used: oil and gas, utilities, water, process manufacturing and calibration service providers in Oman and the wider GCC.
Equipment used in Oman and the wider GCC faces high ambient temperatures, dust and coastal humidity. Keep instruments and accessories out of direct sun, avoid leaving them in closed vehicles, and allow cold equipment to acclimatise before use when moving from an air-conditioned room to an outdoor unit. Cap connectors and threads when they are not in use so that sand and moisture stay out.
Selection and compatibility notes for 8003380
The manufacturer states that this set replaces the discontinued 630 bar hose sets 8003365 and 8003367, which is helpful when a legacy part number appears on an old list.
Before ordering 8003380, confirm the model and, where relevant, the serial number or option code of the instrument it will serve. Confirm voltage, plug type, thread type or pressure rating as applicable, and check the manufacturer documentation for the firmware or hardware revision of the equipment.
If an item looks similar but carries a different part number, do not assume interchangeability. A short note of the calibrator model and application lets us confirm the match for 8003380 before it is supplied.
Installation and commissioning of 8003380
Depressurise the system before connecting or disconnecting 8003380. Check the thread type at each end and fit the correct fitting and seal. Tighten by hand and finish with a suitable wrench without over-torquing.
Raise pressure slowly, check for leaks, and never exceed the pressure rating of the weakest part in the setup.
Maintenance and care
Inspect hoses before each use for cuts, bulges and damaged threads. Replace seals and O-rings when they look worn. Keep the ends capped when not in use to avoid dirt entering the calibrator pressure module.
Retire any hose that has been overpressured, and never use 8003380 above its rated pressure.
Calibration is only as useful as its records. Keep a log of serial numbers, certificate dates, replacement parts and any faults, and store the manufacturer documents with the equipment. This makes audits easier, helps predict when spares will be needed, and shortens the time needed to prepare a purchase request when a part has to be replaced at short notice.
Related products and ordering notes for 8003380
Related items are pressure fittings, O-rings, vent valves, pressure modules, calibration pumps and cases. Please state the pressure range and threads in your enquiry.
Hard-to-find and discontinued spare parts are a daily topic for maintenance planners in oil, gas, power and water facilities. When a plant standardises on one calibrator family, a small stock of the exact spares is far cheaper than a day of lost production, and an early enquiry gives the supplier time to confirm availability and shipping options to Oman and neighbouring countries.
Please note that Seven Star LLC prepares each quotation for 8003380 against the exact part number, so a request that quotes the number and the quantity is answered faster than a general description.
The part number 8003380 should be quoted exactly as printed in this page, because accessories and spares with similar descriptions often differ by one digit.
Frequently asked questions about 8003380
- What is in 8003380? A 1.0 m 630 bar hose and two fittings, 7108500 and 7108560.
- Which sets does it replace? The discontinued 8003365 and 8003367, according to the manufacturer documentation for 8003380.
- What pressure rating applies? 630 bar (9100 psi) at 50 degrees C, according to the manufacturer documentation for 8003380.
- Where does each fitting go? 7108500 on the pressure source and 7108560 on the device under test.
- Which pumps are mentioned? Beamex PGHH and PGPH pumps, according to the manufacturer documentation for 8003380.
Documents and quotation
The official Beamex PGPH instruction manual is attached to this page as a PDF. It lists order code 8003380 among the PGPH accessories (page 7) and shows how the 630 bar hose set is connected. Share order code 8003380 together with your calibrator model and we will confirm the exact part in a written quotation.
Datasheets & Documents
- Datasheet Beamex PGPH Instruction Manual (official PDF) Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
Beamex is a Finnish maker of calibration equipment and software for process instruments. Four calibration technicians founded the company in 1975 because they could not find the equipment they wanted; their first product was a voltage and current simulator, and the first factory opened in 1977. Beamex is headquartered in Pietarsaari (Jakobstad), Finland, and supplies process industries in more than 100 countries.
Seven Star LLC is an independent supplier listing Beamex documenting calibrators, temperature dry blocks, pressure controllers, calibration pumps and pressure modules for buyers in Oman and the GCC. Equipment is quoted against the model and the pressure or temperature ranges required.
Beamex company profile
| Origin | Founded in 1975 in Finland by four calibration technicians; first factory 1977 |
|---|---|
| Headquarters | Pietarsaari (Jakobstad), Finland; ISO 9001 certified since 1992 |
| Product families | MC series multifunction calibrators, temperature dry blocks, automatic and hand pressure generators, external pressure modules, CMX and LOGiCAL calibration software |
| Typical duty | Field and workshop calibration of pressure, temperature and electrical signal instruments, including HART and fieldbus transmitters |
Milestones
- 1975: Four calibration technicians found the company in Finland.
- 1977: The first factory opens.
- 1992: ISO 9001 certification.
Beamex calibrators and accessories
| Model | Type | Typical use |
|---|---|---|
| MC6 | Advanced field calibrator and communicator | Pressure, temperature and electrical calibration with a built-in HART, FOUNDATION Fieldbus and PROFIBUS PA communicator, documented results |
| MC6-Ex | Intrinsically safe field calibrator | Calibration inside Zone 0 and Zone 1 hazardous areas without a hot work permit |
| MC6-T | Temperature calibrator with integrated dry block | Temperature sensors and transmitters, with multifunction electrical and pressure measurement |
| MC4, MC2 | Documenting and hand-held process calibrators | Routine loop, transmitter and switch checks in the field |
| FB, MB | Field and metrology temperature dry blocks | FB for field calibration; MB for higher-accuracy workshop and laboratory work |
| ePG, POC8 | Electric pressure pump and automatic pressure controller | Automated pressure calibration; POC8 for workshop calibration benches |
| PGC, PGM, PGL, PGPH, PGHH | Hand pressure pumps | Pressure and vacuum generation in the field, from low pressure (PGL, ±400 mbar) to hydraulic 700 bar (PGHH) |
| EXT modules | External pressure modules | Extending MC calibrators to additional ranges, 70 kPa to 100 MPa |
Where Beamex equipment is used
Instrument workshops and maintenance teams in oil and gas, refining, petrochemicals, power, water and pharmaceuticals use Beamex calibrators to verify transmitters, switches, gauges and temperature sensors. Documenting calibrators send results to calibration software, which keeps the audit trail required by quality systems and custody transfer metering procedures. Intrinsically safe models are used for in-situ calibration in classified areas.
Ordering Beamex equipment: what we need
State the model and the options you need: internal and external pressure ranges, temperature range, communication protocols (HART, FOUNDATION Fieldbus, PROFIBUS PA), Ex approval, and whether an accredited calibration certificate is required. For spare modules and pumps send the serial number of the calibrator they will be used with, so compatibility can be confirmed.
Facts checked against Beamex company history and product information, October 2026.
Browse Beamex products by category: Portable Test & Measurement, Temperature Instrumentation.
FAQ
Questions about the Beamex 8003380 630 Bar Pressure Hose Set, 1 m with
Answers from our engineering team on installation, compatibility and integration.
01What is in 8003380?
A 1.0 m 630 bar hose and two fittings, 7108500 and 7108560.
02Which sets does it replace?
The discontinued 8003365 and 8003367, according to the manufacturer documentation for 8003380.
03What pressure rating applies?
630 bar (9100 psi) at 50 degrees C, according to the manufacturer documentation for 8003380.
04Where does each fitting go?
7108500 on the pressure source and 7108560 on the device under test.
05Which pumps are mentioned?
Beamex PGHH and PGPH pumps, according to the manufacturer documentation for 8003380.


















Reviews
There are no reviews yet.