Brand:

Beamex 8036140 Battery Pack MC2 and MC4, NiMH

Description

Overview of Beamex MC2 and MC4 NiMH battery pack Beamex 8036140

The Beamex 8036140 is a rechargeable nickel metal hydride battery pack for the MC2 and MC4 calibrators, with a capacity of 4000 mAh at 3.6 V.

Legacy calibrators remain in service in many plants, and a fresh battery is the most common spare part requested for them.

This page describes Beamex MC2 and MC4 NiMH battery pack for buyers who need the exact part number Beamex 8036140. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer; the data below is taken from the manufacturer published product pages and brochures.

Key features of 8036140

  • Order code: 8036140.
  • Battery chemistry: Rechargeable NiMH.
  • Capacity: 4000 mAh.
  • Voltage: 3.6 V.
  • Fits: MC2 and MC4 calibrators.

Technical specifications for 8036140

Order code 8036140
Battery chemistry Rechargeable NiMH
Capacity 4000 mAh
Voltage 3.6 V
Fits MC2 and MC4 calibrators

All values above come from the manufacturer documentation and may change with later revisions. Please quote 8036140 when you need the matching datasheet or a confirmation of the current revision.

Typical applications in Oman and the GCC

Battery packs are the part of a portable calibrator that ages first. Plants in Oman and the GCC that run calibrators daily for turnarounds, shutdown checks and routine rounds see capacity fall after repeated charge cycles, and a fresh pack restores full working time between charges.

Maintenance contractors working on oil and gas sites, utilities, desalination and manufacturing lines keep spare packs in the kit so that a flat battery never stops a loop check or a documentation run.

The part is relevant wherever the related calibration equipment is used: oil and gas, utilities, water, process manufacturing and calibration service providers in Oman and the wider GCC.

Equipment used in Oman and the wider GCC faces high ambient temperatures, dust and coastal humidity. Keep instruments and accessories out of direct sun, avoid leaving them in closed vehicles, and allow cold equipment to acclimatise before use when moving from an air-conditioned room to an outdoor unit. Cap connectors and threads when they are not in use so that sand and moisture stay out.

Selection and compatibility notes for 8036140

The charger for these calibrators is the BC05-B power supply (8036795), used with a country-specific power cord. A US cord is listed as 6676270.

Operators who still run older MC2 and MC4 units can restore their battery life with this pack instead of replacing the instrument.

Before ordering 8036140, confirm the model and, where relevant, the serial number or option code of the instrument it will serve. Confirm voltage, plug type, thread type or pressure rating as applicable, and check the manufacturer documentation for the firmware or hardware revision of the equipment.

If an item looks similar but carries a different part number, do not assume interchangeability. A short note of the calibrator model and application lets us confirm the match for 8036140 before it is supplied.

Installation and commissioning of 8036140

Switch the calibrator off and disconnect the charger and all test leads before opening the battery compartment. Follow the replacement procedure in the calibrator user manual, keep the connector orientation exactly as found, and refit the cover before switching on. After fitting 8036140, charge the pack fully with the matching charger before relying on it in the field.

Reset the date and time if the calibrator asks for it, and confirm that the battery indicator reads correctly. Dispose of the old pack through a battery recycling channel in line with local regulations.

Maintenance and care

Store spare battery packs partly charged in a cool, dry place and charge them before use. Avoid leaving a pack discharged for a long time, and do not charge outside the temperature limits given in the calibrator specification. Replace the pack when operating time becomes noticeably shorter than expected.

Use only the matching charger listed for the calibrator, and keep the contacts clean. Record the installation date of 8036140 so that replacement can be planned.

Calibration is only as useful as its records. Keep a log of serial numbers, certificate dates, replacement parts and any faults, and store the manufacturer documents with the equipment. This makes audits easier, helps predict when spares will be needed, and shortens the time needed to prepare a purchase request when a part has to be replaced at short notice.

Related products and ordering notes for 8036140

Related items include the matching power supply and power cord, a protective case and spare test leads. The calibrator brochure and the manufacturer webshop list each accessory by part number.

Hard-to-find and discontinued spare parts are a daily topic for maintenance planners in oil, gas, power and water facilities. When a plant standardises on one calibrator family, a small stock of the exact spares is far cheaper than a day of lost production, and an early enquiry gives the supplier time to confirm availability and shipping options to Oman and neighbouring countries.

Please note that Seven Star LLC prepares each quotation for 8036140 against the exact part number, so a request that quotes the number and the quantity is answered faster than a general description.

The part number 8036140 should be quoted exactly as printed in this page, because accessories and spares with similar descriptions often differ by one digit.

Frequently asked questions about 8036140

  • Which calibrators does 8036140 fit? It is the NiMH battery pack for the MC2 and MC4 calibrators.
  • What are the electrical values? 4000 mAh at 3.6 V, according to the manufacturer documentation for 8036140.
  • Which power supply charges the calibrator? The BC05-B power supply for MC2 and MC4, order code 8036795.
  • Is it a lithium pack? No. It is nickel metal hydride, according to the manufacturer documentation for 8036140.
  • Can it be used in the MC6? No. The MC6 uses its own lithium-ion pack, 8081785.

Documents and quotation

The official Beamex MC4 User Guide is attached to this page as a PDF. Its battery pack and charging chapter (pages 23–26) describes the battery used in the MC4, its charging and its expected service life. Share order code 8036140 together with your calibrator model and we will confirm the exact part in a written quotation.

Datasheets & Documents
  • PDF Datasheet Beamex MC4 User Guide (official PDF) Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Beamex is a Finnish maker of calibration equipment and software for process instruments. Four calibration technicians founded the company in 1975 because they could not find the equipment they wanted; their first product was a voltage and current simulator, and the first factory opened in 1977. Beamex is headquartered in Pietarsaari (Jakobstad), Finland, and supplies process industries in more than 100 countries.

Seven Star LLC is an independent supplier listing Beamex documenting calibrators, temperature dry blocks, pressure controllers, calibration pumps and pressure modules for buyers in Oman and the GCC. Equipment is quoted against the model and the pressure or temperature ranges required.

Beamex company profile

Origin Founded in 1975 in Finland by four calibration technicians; first factory 1977
Headquarters Pietarsaari (Jakobstad), Finland; ISO 9001 certified since 1992
Product families MC series multifunction calibrators, temperature dry blocks, automatic and hand pressure generators, external pressure modules, CMX and LOGiCAL calibration software
Typical duty Field and workshop calibration of pressure, temperature and electrical signal instruments, including HART and fieldbus transmitters

Milestones

  • 1975: Four calibration technicians found the company in Finland.
  • 1977: The first factory opens.
  • 1992: ISO 9001 certification.

Beamex calibrators and accessories

Model Type Typical use
MC6 Advanced field calibrator and communicator Pressure, temperature and electrical calibration with a built-in HART, FOUNDATION Fieldbus and PROFIBUS PA communicator, documented results
MC6-Ex Intrinsically safe field calibrator Calibration inside Zone 0 and Zone 1 hazardous areas without a hot work permit
MC6-T Temperature calibrator with integrated dry block Temperature sensors and transmitters, with multifunction electrical and pressure measurement
MC4, MC2 Documenting and hand-held process calibrators Routine loop, transmitter and switch checks in the field
FB, MB Field and metrology temperature dry blocks FB for field calibration; MB for higher-accuracy workshop and laboratory work
ePG, POC8 Electric pressure pump and automatic pressure controller Automated pressure calibration; POC8 for workshop calibration benches
PGC, PGM, PGL, PGPH, PGHH Hand pressure pumps Pressure and vacuum generation in the field, from low pressure (PGL, ±400 mbar) to hydraulic 700 bar (PGHH)
EXT modules External pressure modules Extending MC calibrators to additional ranges, 70 kPa to 100 MPa

Where Beamex equipment is used

Instrument workshops and maintenance teams in oil and gas, refining, petrochemicals, power, water and pharmaceuticals use Beamex calibrators to verify transmitters, switches, gauges and temperature sensors. Documenting calibrators send results to calibration software, which keeps the audit trail required by quality systems and custody transfer metering procedures. Intrinsically safe models are used for in-situ calibration in classified areas.

Ordering Beamex equipment: what we need

State the model and the options you need: internal and external pressure ranges, temperature range, communication protocols (HART, FOUNDATION Fieldbus, PROFIBUS PA), Ex approval, and whether an accredited calibration certificate is required. For spare modules and pumps send the serial number of the calibrator they will be used with, so compatibility can be confirmed.

Facts checked against Beamex company history and product information, October 2026.

FAQ

Questions about the Beamex 8036140 Battery Pack MC2 and MC4, NiMH

Answers from our engineering team on installation, compatibility and integration.

01Which calibrators does 8036140 fit?
It is the NiMH battery pack for the MC2 and MC4 calibrators.
02What are the electrical values?
4000 mAh at 3.6 V, according to the manufacturer documentation for 8036140.
03Which power supply charges the calibrator?
The BC05-B power supply for MC2 and MC4, order code 8036795.
04Is it a lithium pack?
No. It is nickel metal hydride, according to the manufacturer documentation for 8036140.
05Can it be used in the MC6?
No. The MC6 uses its own lithium-ion pack, 8081785.