Brand:

Beamex 7021390 630 Bar Pressure Hose, 1.0 m

Description

Overview of Beamex 630 bar pressure hose 1.0 m Beamex 7021390

The Beamex 7021390 is a 630 bar pressure hose, 1.0 m long. The hoses are rated for 630 bar (9100 psi) at 50 degrees C and have Bx 1215 female threads at the ends.

Hoses and fittings are among the parts that wear first in pressure calibration, so spares are held by most instrument workshops.

This page describes Beamex 630 bar pressure hose 1.0 m for buyers who need the exact part number Beamex 7021390. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer; the data below is taken from the manufacturer published product pages and brochures.

Key features of 7021390

  • Order code: 7021390.
  • Pressure rating: 630 bar / 9100 psi at 50 degrees C / 122 degrees F.
  • Thread at ends: Bx 1215 female.
  • Length: 1.0 m (39.37 in).

Technical specifications for 7021390

Order code 7021390
Pressure rating 630 bar / 9100 psi at 50 degrees C / 122 degrees F
Thread at ends Bx 1215 female
Length 1.0 m (39.37 in)

All values above come from the manufacturer documentation and may change with later revisions. Please quote 7021390 when you need the matching datasheet or a confirmation of the current revision.

Typical applications in Oman and the GCC

Pressure calibration in the field depends on sound hoses and fittings between the pump, the calibrator and the instrument under test. Instrument technicians in Oman and the GCC use them on pressure transmitters, gauges and switches in oil and gas, water and power plants.

Wear, kinks and damaged threads are common after a campaign, so keeping spare hose sets in the kit prevents leaks from stopping a job.

The part is relevant wherever the related calibration equipment is used: oil and gas, utilities, water, process manufacturing and calibration service providers in Oman and the wider GCC.

Equipment used in Oman and the wider GCC faces high ambient temperatures, dust and coastal humidity. Keep instruments and accessories out of direct sun, avoid leaving them in closed vehicles, and allow cold equipment to acclimatise before use when moving from an air-conditioned room to an outdoor unit. Cap connectors and threads when they are not in use so that sand and moisture stay out.

Selection and compatibility notes for 7021390

Longer versions are 7021470 (2.0 m) and 7021490 (3.0 m). A set with fittings is 8003380. Connection to internal and external pressure modules is explained in the manufacturer fittings guide.

Before ordering 7021390, confirm the model and, where relevant, the serial number or option code of the instrument it will serve. Confirm voltage, plug type, thread type or pressure rating as applicable, and check the manufacturer documentation for the firmware or hardware revision of the equipment.

If an item looks similar but carries a different part number, do not assume interchangeability. A short note of the calibrator model and application lets us confirm the match for 7021390 before it is supplied.

Installation and commissioning of 7021390

Depressurise the system before connecting or disconnecting 7021390. Check the thread type at each end and fit the correct fitting and seal. Tighten by hand and finish with a suitable wrench without over-torquing.

Raise pressure slowly, check for leaks, and never exceed the pressure rating of the weakest part in the setup.

Maintenance and care

Inspect hoses before each use for cuts, bulges and damaged threads. Replace seals and O-rings when they look worn. Keep the ends capped when not in use to avoid dirt entering the calibrator pressure module.

Retire any hose that has been overpressured, and never use 7021390 above its rated pressure.

Calibration is only as useful as its records. Keep a log of serial numbers, certificate dates, replacement parts and any faults, and store the manufacturer documents with the equipment. This makes audits easier, helps predict when spares will be needed, and shortens the time needed to prepare a purchase request when a part has to be replaced at short notice.

Related products and ordering notes for 7021390

Related items are pressure fittings, O-rings, vent valves, pressure modules, calibration pumps and cases. Please state the pressure range and threads in your enquiry.

Hard-to-find and discontinued spare parts are a daily topic for maintenance planners in oil, gas, power and water facilities. When a plant standardises on one calibrator family, a small stock of the exact spares is far cheaper than a day of lost production, and an early enquiry gives the supplier time to confirm availability and shipping options to Oman and neighbouring countries.

Please note that Seven Star LLC prepares each quotation for 7021390 against the exact part number, so a request that quotes the number and the quantity is answered faster than a general description.

The part number 7021390 should be quoted exactly as printed in this page, because accessories and spares with similar descriptions often differ by one digit.

Frequently asked questions about 7021390

  • What pressure is 7021390 rated for? 630 bar (9100 psi) at 50 degrees C, according to the manufacturer documentation for 7021390.
  • What threads does it have? Bx 1215 female at both ends, according to the manufacturer documentation for 7021390.
  • How long is it? 1.0 m, according to the manufacturer documentation for 7021390.
  • Are longer versions available? Yes, 2.0 m (7021470) and 3.0 m (7021490).
  • Is there a kit with fittings? Yes, 8003380, according to the manufacturer documentation for 7021390.

Documents and quotation

The official Beamex PG calibration pumps brochure is attached to this page as a PDF. Its pages on the high-pressure pumps (page 5) list the 630 bar pressure hoses and fittings offered as optional accessories. Quote order code 7021390 in your request and we will confirm compatibility with your unit in a written quotation. The brochure also explains which Beamex hydraulic pumps work up to 630 bar, so you can confirm that the hose rating matches both your pump and the instrument under test before you order.

Datasheets & Documents
  • PDF Datasheet Beamex PG Calibration Pumps Brochure (official PDF) Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Beamex is a Finnish maker of calibration equipment and software for process instruments. Four calibration technicians founded the company in 1975 because they could not find the equipment they wanted; their first product was a voltage and current simulator, and the first factory opened in 1977. Beamex is headquartered in Pietarsaari (Jakobstad), Finland, and supplies process industries in more than 100 countries.

Seven Star LLC is an independent supplier listing Beamex documenting calibrators, temperature dry blocks, pressure controllers, calibration pumps and pressure modules for buyers in Oman and the GCC. Equipment is quoted against the model and the pressure or temperature ranges required.

Beamex company profile

Origin Founded in 1975 in Finland by four calibration technicians; first factory 1977
Headquarters Pietarsaari (Jakobstad), Finland; ISO 9001 certified since 1992
Product families MC series multifunction calibrators, temperature dry blocks, automatic and hand pressure generators, external pressure modules, CMX and LOGiCAL calibration software
Typical duty Field and workshop calibration of pressure, temperature and electrical signal instruments, including HART and fieldbus transmitters

Milestones

  • 1975: Four calibration technicians found the company in Finland.
  • 1977: The first factory opens.
  • 1992: ISO 9001 certification.

Beamex calibrators and accessories

Model Type Typical use
MC6 Advanced field calibrator and communicator Pressure, temperature and electrical calibration with a built-in HART, FOUNDATION Fieldbus and PROFIBUS PA communicator, documented results
MC6-Ex Intrinsically safe field calibrator Calibration inside Zone 0 and Zone 1 hazardous areas without a hot work permit
MC6-T Temperature calibrator with integrated dry block Temperature sensors and transmitters, with multifunction electrical and pressure measurement
MC4, MC2 Documenting and hand-held process calibrators Routine loop, transmitter and switch checks in the field
FB, MB Field and metrology temperature dry blocks FB for field calibration; MB for higher-accuracy workshop and laboratory work
ePG, POC8 Electric pressure pump and automatic pressure controller Automated pressure calibration; POC8 for workshop calibration benches
PGC, PGM, PGL, PGPH, PGHH Hand pressure pumps Pressure and vacuum generation in the field, from low pressure (PGL, ±400 mbar) to hydraulic 700 bar (PGHH)
EXT modules External pressure modules Extending MC calibrators to additional ranges, 70 kPa to 100 MPa

Where Beamex equipment is used

Instrument workshops and maintenance teams in oil and gas, refining, petrochemicals, power, water and pharmaceuticals use Beamex calibrators to verify transmitters, switches, gauges and temperature sensors. Documenting calibrators send results to calibration software, which keeps the audit trail required by quality systems and custody transfer metering procedures. Intrinsically safe models are used for in-situ calibration in classified areas.

Ordering Beamex equipment: what we need

State the model and the options you need: internal and external pressure ranges, temperature range, communication protocols (HART, FOUNDATION Fieldbus, PROFIBUS PA), Ex approval, and whether an accredited calibration certificate is required. For spare modules and pumps send the serial number of the calibrator they will be used with, so compatibility can be confirmed.

Facts checked against Beamex company history and product information, October 2026.

FAQ

Questions about the Beamex 7021390 630 Bar Pressure Hose, 1.0 m

Answers from our engineering team on installation, compatibility and integration.

01What pressure is 7021390 rated for?
630 bar (9100 psi) at 50 degrees C, according to the manufacturer documentation for 7021390.
02What threads does it have?
Bx 1215 female at both ends, according to the manufacturer documentation for 7021390.
03How long is it?
1.0 m, according to the manufacturer documentation for 7021390.
04Are longer versions available?
Yes, 2.0 m (7021470) and 3.0 m (7021490).
05Is there a kit with fittings?
Yes, 8003380, according to the manufacturer documentation for 7021390.