Brand:

Rotork YT-430 Lock-Up Valve, Aluminum, Cv 1.8

Description

Rotork YT-430 overview

The Rotork YT-430 is a lock-up valve, listed in the manufacturer documentation as a lock-up valve (aluminum). The Rotork YT-430 offers 3/8 NPT ports and Cv 1.8 for larger actuators in an aluminum body. This page summarises the published data so that engineers and buyers can confirm the part number quickly, compare it with neighbouring models and prepare a precise enquiry. Plants in the Gulf often run equipment for decades, and accessories of this kind are frequently ordered long after the project was built, so having the exact designation, the published ratings and the manual in one place saves time during shutdown planning.

Every figure on this page comes from the Rotork product literature for the YT-430. Where a value is not published, we do not quote one, and where the exact build matters, please confirm it against the nameplate of the unit you intend to replace. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer.

Key features of the YT-430

  • Blocks the flow path between positioner and actuator when supply pressure falls below the set value, holding valve position.
  • Installed with piping only, without a separate bracket.
  • Hysteresis below 0.01 MPa.
  • Built-in 80 mesh screen protects against foreign matter.
  • Corrosion-resistant coated aluminum or stainless steel 316 body.
  • Single and double versions.

These functions make the YT-430 a practical choice where the published data matches the duty, and the specification table below gives the exact figures to use when you check compatibility.

YT-430 technical specifications

Housing material aluminum
Maximum supply pressure 1 MPa (10 bar)
Signal pressure setting range 0.14 to 0.7 MPa (1.4 to 7 bar)
Hysteresis Below 0.01 MPa (0.1 bar)
Flow capacity Cv 1.8
Input / output connection 3/8 NPT
Signal connection 1/4 NPT
Ambient temperature Standard -20 to 70 °C; high -20 to 120 °C; low -40 to 70 °C; arctic -50 to 70 °C
Weight, single 1.5 kg (3.3 lb)
Weight, double 2.7 kg (6 lb)
Strainer Built-in 80 mesh screen

Values are taken from the manufacturer manual for the YT-430 and are typical published limits tested under standard laboratory conditions. Always verify the nameplate, certificate and option codes of your unit.

Typical applications in Oman and the GCC

The YT-430 keeps a control valve at its last position if plant instrument air fails. Typical uses include control valves on pressure, level and flow loops in process plants, power stations and water facilities, where a sudden compressor trip or pipe break could otherwise drive the valve fully open or closed. Operating conditions in the region add their own demands: high summer ambient temperatures, dust, humidity near the coast and long periods of continuous operation. Equipment is therefore chosen with attention to temperature range, enclosure protection and the quality of local instrument air, and these are the same points that the specification table above helps you verify.

Selection and compatibility notes for the YT-430

Set the signal pressure above the minimum air needed by the loop and within 0.14 to 0.7 MPa. Choose port size according to the actuator and the Cv, the body material for the environment and the single or double version listed in the manual. Use silicone rubber temperature versions outdoors as recommended in the manual. Beyond the headline numbers, think about the whole instrument air and signal chain. Moisture, oil and particles in compressed air cause most field failures of pneumatic accessories, so confirm dryer performance, filter condition and tubing material before blaming a device. For electrical items, check cable gland type, thread form and certification, and keep segregation between intrinsically safe and non-intrinsically safe wiring. In hot Gulf summers, enclosure surface temperature and ambient limits deserve a second look, especially for valves in direct sunlight where the local temperature can exceed the site design ambient. Writing these items on the data sheet prevents an incorrect substitute at the time of replacement.

Installation and commissioning

Install the YT-430 between the positioner and the actuator using piping only, connect the signal port to the plant air supply and set the trip pressure by the adjustment. Test by lowering the signal pressure and confirm that the actuator holds position.

Maintenance and service

Check the set point, clean the 80 mesh screen and replace the diaphragm assembly or repair kit parts as listed in the manual when leaks or drift appear.

Related products and ordering notes

Related products for the YT-430 include snap acting relays (YT-520 series), volume boosters and YT positioners. Send actuator details and the trip pressure required with your RFQ.

Frequently asked questions about the YT-430

  • What does the YT-430 lock-up valve do? It senses the plant air pressure as a signal and, when that signal drops below the set pressure, blocks the flow path so the actuator keeps the current valve opening.
  • What is the setting range of the YT-430? The signal pressure setting range is 0.14 to 0.7 MPa (1.4 to 7 bar) with hysteresis below 0.01 MPa.
  • What is the Cv of the YT-430? The manual lists a flow capacity Cv of 1.8 with 3/8 NPT connections.

Documents and quotation

The manufacturer manual that contains the specification for the YT-430 is available as a PDF datasheet on this page. When you are ready to order, send an RFQ that quotes the part number YT-430, the quantity, the actuator or valve make and size, the control signal and supply pressure, the hazardous-area scheme and the delivery location. We will respond with availability and lead time for the YT-430. Please also mention whether the unit replaces an existing device and attach a photo of its nameplate if possible.

Other Models in the Lock Range

Seven Star LLC supplies models from the Lock range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
Rotork YT-400 Lock-Up Valve, Aluminum, Cv 0.9Automation AccessoriesView details
Rotork YT-405 Lock-Up Valve, Stainless Steel 316, Cv 0.9Automation AccessoriesView details
Rotork YT-430 Lock-Up Valve, Aluminum, Cv 1.8Automation AccessoriesYou are viewing this model
Datasheets & Documents
  • PDF Datasheet Rotork YT-430 Lock-Up Valve, aluminum, Cv 1.8 Product Manual Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Rotork is a British flow control company best known for electric valve actuators. Jeremy Fry founded Rotork Engineering Company in Bath in 1957, the year its first actuator, the 100A, went on sale, and the group is still headquartered in Bath and listed on the London Stock Exchange. Today Rotork makes electric, pneumatic, hydraulic and electro-hydraulic actuators, gearboxes, precision regulators and valve positioners.

Seven Star LLC is an independent supplier listing Rotork actuators, Rotork Fairchild regulators, YTC positioners and spare parts for buyers in Oman and the GCC. Replacement units are matched from the actuator nameplate and wiring diagram number.

Rotork company profile

Origin Founded by Jeremy Fry in 1957 in Bath, England; first product the 100A valve actuator
Headquarters Brassmill Lane, Bath, United Kingdom
Ownership Rotork plc, a public company listed on the London Stock Exchange
Acquired brands Fairchild precision pneumatic controls (2011, Winston-Salem, USA), YTC valve positioners (Young Tech Co., Seoul, 2014), Mastergear gearboxes (2016)
Product families Intelligent electric actuators, control valve actuators, electro-hydraulic and fluid power actuators, gearboxes, precision regulators, positioners and network control systems

Milestones

  • 1957: Jeremy Fry founds Rotork in Bath, England; the first product is the 100A valve actuator.
  • 2011: Fairchild precision pneumatic controls (Winston-Salem, USA) is acquired.
  • 2014: YTC valve positioners (Young Tech Co., Seoul) is acquired.
  • 2016: Mastergear gearboxes is acquired.

Rotork actuators, regulators and positioners

Series Type Typical use
IQ3 Intelligent multi-turn electric actuator Gate and globe valves, penstocks and sluice gates; non-intrusive setup with a Bluetooth setting tool, double-sealed enclosure, data logging
IQT3 Intelligent part-turn electric actuator Ball, butterfly and plug valves and dampers, with the same setup and diagnostics as IQ3
CVA Precision control valve electric actuator Continuous modulating control of linear and part-turn control valves where instrument air is not available
CMA Compact modulating electric actuator Small control valves, chemical injection and metering pumps
Skilmatic SI3 Self-contained electro-hydraulic actuator Spring-return fail-safe and ESD duty with partial stroke testing, needing only an electrical supply
GP / GH Scotch yoke pneumatic (GP) and hydraulic (GH) actuators Large quarter-turn valves on pipelines and ESD service; spring-return or double-acting
CP Compact pneumatic quarter-turn actuator Smaller on-off ball and butterfly valves on plant air
Fairchild 10, 30, 55, 66, M11, 81 Precision pressure regulators Instrument air to positioners and actuators, test benches; Model 66 in stainless steel for corrosive and offshore sites
Fairchild 1000 No-bleed precision regulator Saves instrument air or gas where continuous bleed is not acceptable
Fairchild 10BP, 4000ABP Back pressure regulators Holding upstream pressure in process and test systems
YTC YT-1000, YT-3300 Valve positioners Electro-pneumatic (YT-1000) and smart HART (YT-3300) positioning of linear and rotary pneumatic actuators

Where Rotork equipment is used

Rotork actuators are common on oil and gas pipelines and terminals, refineries and gas plants, water and wastewater networks, desalination plants and power stations. Electric IQ actuators handle isolation valves on long pipelines and water mains, often networked over Rotork Pakscan, Modbus or another fieldbus. Skilmatic and scotch yoke actuators cover emergency shutdown valves, and Fairchild regulators and YTC positioners sit on pneumatic control valves throughout process plants.

Ordering Rotork actuators and spare parts: what we need

Send photos of the actuator nameplate with the model, serial number and wiring diagram number; the wiring diagram is usually inside the terminal cover. Rotork can identify the original build, including options and control interface, from the serial number. For a new application add the valve type and size, required torque or thrust, operating time, mounting flange (ISO 5210 or ISO 5211), power supply, control signal or network protocol, fail-safe requirement and hazardous-area marking. For regulators and positioners send the full model code and the pressure or signal ranges.

Facts checked against Rotork plc company information and product data, October 2026.

FAQ

Questions about the Rotork YT-430 Lock-Up Valve, Aluminum, Cv 1.8

Answers from our engineering team on installation, compatibility and integration.

01What does the YT-430 lock-up valve do?
It senses the plant air pressure as a signal and, when that signal drops below the set pressure, blocks the flow path so the actuator keeps the current valve opening.
02What is the setting range of the YT-430?
The signal pressure setting range is 0.14 to 0.7 MPa (1.4 to 7 bar) with hysteresis below 0.01 MPa.
03What is the Cv of the YT-430?
The manual lists a flow capacity Cv of 1.8 with 3/8 NPT connections.
04What weight does the YT-430 have?
1.5 kg (3.3 lb) for the single version and 2.7 kg (6 lb) for the double version.
05How do I request a quotation for the YT-430?
Send the part number YT-430 with quantity, actuator or valve details, signal, supply and any hazardous-area requirement, and we will answer your RFQ. Seven Star LLC is an independent supplier and is not affiliated with Rotork.