Brand:

Moog IN123-825-001 Buffer Amplifier for Servo Valves

Description

Moog IN123-825-001 buffer amplifier overview

The Moog IN123-825-001 is a compact DIN rail module that sits between a standard signal source and a Moog servo or proportional valve. Its job is to translate the output of a PLC or of an older servo amplifier into the drive signal that the valve coil or the valve electronics expects. Without such a module, a plus or minus 10 V or 4 to 20 mA controller output cannot drive a servo valve directly, which is the compatibility problem the IN123-825-001 was designed to remove.

The IN123-825-001 accepts three kinds of input: 4 to 20 mA, 0 to plus or minus 100 mA and 0 to plus or minus 10 V. On the output side it can deliver 4 to 20 mA fixed, 0 to plus or minus 10 V fixed, or a current from 0 to plus or minus 100 mA that is chosen with switches in steps of 5, 10, 20, 30 and 50 mA. Because the switch selections add together, selecting 30 mA and 50 mA gives a full scale of plus or minus 80 mA, as the maker’s example shows.

A second purpose of the IN123-825-001 is retrofit work. The maker states that it allows older mechanical feedback valves to be replaced by modern electrical feedback valves without changing the existing servo amplifier: the buffer amplifier takes the old amplifier’s current output and converts it into a signal the new valve understands. The datasheet also notes that the IN123-825-001 is equivalent to the old model G123-825-001, which helps when an old drawing or spare-parts list uses that number.

Key features of the Moog IN123-825-001

  • Switch-selectable input signals, so one module covers PLC voltage, PLC current and servo amplifier current sources.
  • Switch-selectable output signals to suit most Moog valves; the IN123-825-001 can act as a 4 to 20 mA, a 10 V or a selectable-current stage.
  • Switch-selectable input filter with a single-pole active response to remove noise from the command signal.
  • Vv and Iv LED indicators that show valve drive, plus a Vs LED for the internal supply.
  • Valve drive test point for a multimeter or scope during commissioning.
  • Compact DIN rail housing, 24 VDC supply, CE marked and RoHS compliant.

IN123-825-001 technical specifications

Part number IN123-825-001
Equivalent old model G123-825-001
Type Buffer amplifier, DIN rail housing
Signal inputs 4 to 20 mA, 0 to plus or minus 100 mA, 0 to plus or minus 10 V
Current input resistance 50 ohm (terminals 4 to 8)
Valve drive outputs 0 to plus or minus 10 V into 1 kohm minimum; 4 to 20 mA into 500 ohm maximum; 0 to plus or minus 100 mA maximum
Valve drive current selections 5, 10, 20, 30 and 50 mA, switch selectable and additive
Input filter Active, single pole; corner frequency selections 7, 16, 34, 72 and 723 Hz, 10 percent
Supply 24 V nominal, 22 to 28 V; 65 mA at 24 V with no output current
Recommended fuse M205, 250 mA T (slow blow), to IEC 127-2 sheet 3
Indicators Vv and Iv valve drive LEDs, Vs internal supply LED
Test point Valve drive signal test point, 10 kohm
Mounting DIN rail
Protection class IP 20
Ambient temperature 0 to 40 degC (32 to 104 degF)
Dimensions 100 mm W x 108 mm H x 22.5 mm D
Weight 120 g (4.2 oz)
EMC IEC 61000-6-4 emission, IEC 61000-6-2 immunity; CE marked; RoHS compliant

The values above for the IN123-825-001 are taken from the manufacturer’s datasheet. The datasheet gives a formula for the maximum supply current when the module powers a valve through its terminal 10, so check the fuse rating when the IN123-825-001 also feeds a proportional valve.

Typical applications in oil and gas, utilities, water and manufacturing

Hydraulic plants in refineries, power stations, water works and factories often have a PLC or DCS that produces a standard analog output, while the hydraulic axis uses a servo valve. The IN123-825-001 bridges that gap in a cabinet. In Oman and the GCC it is typically found in turbine and compressor hydraulic skids, press and forming lines, test benches and any retrofit where an old mechanical feedback servo valve is replaced.

Because the IN123-825-001 is a small module with screw terminals and a DIN rail clip, it can be changed quickly during a shutdown. Maintenance planners often keep one as a spare next to the valve spares, and search for the exact part number IN123-825-001 or for the legacy number G123-825-001.

Selection and compatibility notes for IN123-825-001

Identify the source signal first: a PLC output of 4 to 20 mA or plus or minus 10 V, or the current output of an existing servo amplifier. The IN123-825-001 handles all of these, but the input terminals differ, so follow the terminal table in the datasheet. Then identify the valve: for a mechanical feedback valve choose a current output step that matches the coil rating; for an electrical feedback valve choose 4 to 20 mA, plus or minus 10 V or the 10 mA setting, as the datasheet describes.

Check the supply and the environment. The IN123-825-001 needs 24 VDC within 22 to 28 V, is rated IP 20 and is intended for 0 to 40 degC, so it belongs inside a control cabinet and not on a hot skid. The output into a voltage load needs at least 1 kohm, and into a 4 to 20 mA load at most 500 ohm.

Installation and commissioning of the IN123-825-001

Snap the IN123-825-001 onto the DIN rail, wire the 24 VDC supply through a fuse of 250 mA slow blow as recommended and connect the cable screen to the enclosure cable gland as noted on the wiring diagram. Set the input type, output type and filter switches before power is applied, and keep a record of the switch positions.

During commissioning, use the valve drive test point and the Vv and Iv LEDs to confirm that the output follows the command, then set the control loop gain. The datasheet notes that the current-selection resistors are plug-in parts on the circuit board and that the default full scale is 100 mA; change them only according to the maker’s instructions.

Maintenance and care

The IN123-825-001 has no moving parts, so routine care is limited to keeping terminals tight, the cabinet clean and dry, and the supply fuse correct. After any servo valve replacement, confirm that the full-scale selection still matches the new coil.

If a loop becomes noisy, the filter corner frequency of the IN123-825-001 can be lowered by switch selection, but a lower corner adds lag, so test the closed loop after the change. Store spare modules in their packaging, within the temperature range given in the datasheet.

Related products and ordering notes for IN123-825-001

Related Moog items are the IN122-829A001 and IN122-829A011 P-I servo amplifiers, the G040-119A valve checker for mechanical feedback valves and the G040-123C checker for electrical feedback valves, and the servo valves of the 761, 631 and 72 Series that appear in the same catalog family.

Please give the quantity, the delivery location and the valve model that the IN123-825-001 will drive when you request a quotation. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer; the Moog name and the part number are used only to identify the product being quoted.

Frequently asked questions in short

The IN123-825-001 converts PLC or servo amplifier signals into a Moog valve drive signal. It has switch-selectable inputs, outputs and filter, runs on 24 VDC and mounts on a DIN rail. The old number G123-825-001 is listed as its equivalent. See the questions below.

Documents and quotation

The manufacturer’s datasheet for the IN123-825-001 is attached as a PDF. To obtain a quotation, send an RFQ with the part number IN123-825-001 and the quantity; Seven Star LLC will reply with availability and lead time for Oman and the GCC.

Datasheets & Documents
  • PDF Datasheet Moog IN123-825-001 Buffer Amplifier for Servo Valves Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Moog is an American maker of precision motion control products, founded in July 1951 in East Aurora, New York, by Bill Moog, his brother Art Moog and Lou Geyer. Its first product was Bill Moog's electrohydraulic servo valve, which turns small electrical signals into fast, accurate hydraulic movement. Moog is still headquartered in East Aurora and is listed on the New York Stock Exchange.

Seven Star LLC lists Moog servo valves, proportional valves and an explosion-proof brushless servo motor, and sources them by model and type number for plants in Oman.

MOOG company profile

Founded July 1951, East Aurora, New York, as Moog Valve Company
Founders Bill Moog, Art Moog and Lou Geyer
Headquarters East Aurora, New York, USA
Ownership Public company, New York Stock Exchange
Product families Electrohydraulic servo and proportional valves, servo motors and drives, electromechanical actuators, test and simulation systems

Milestones

  • 1951: The Moog Valve Company starts in a corner of an airport hangar in East Aurora.
  • 1953: The US patent for Bill Moog's electrohydraulic servo valve is issued.
  • 1959: The company goes public as Moog Servocontrols Inc.

Moog servo valves and motors listed

The Moog products on this page are:

  • G761 series: two-stage flow control servo valve with mechanical feedback
  • 79 series, including D791 and D792: pilot-operated servo valves for high flow rates
  • Servo valves and servo-proportional valves for hydraulic control in general
  • G-3LM6-048-00-00-01: an explosion-proof brushless servo motor, listed here under the G400K series

Within one series, valves differ in rated flow, spool lap, coil rating, seal material and pilot arrangement. Two G761 valves with different type numbers are therefore not interchangeable without checking.

Where Moog servo valves are used

Moog servo valves control steam and gas turbine fuel and steam actuators, compressor anti-surge and guide vane actuators, steel mill gauge control, injection molding and presses, and materials test machines. In GCC power stations and gas plants the usual request is a like-for-like valve for a turbine control actuator specified by the turbine builder.

MOOG products we list

Family Examples
Hydraulic Valves & Components 72 Series Two-Stage Flow Control Servo V…, 79 Series Flow Control Servo Valve, D634 Direct Drive Servo Valve, D638 Digital p/Q Control Servo Valve, D661 Pilot-Operated Servo Valve, D671 to D675 Pilot-Operated Servo-Propor…, D791 Pilot-Operated Servo Valve, D792 High-Flow Servo Valve and 5 more
Electric Motors G-3LM6-048-00-00-01 Brushless Servo Motor

Ordering Moog parts: what we need

The nameplate on a Moog servo valve shows the model, a type designation and a serial number. Please send all three, or a clear photo. The type designation fixes rated flow, maximum operating pressure, signal and coil data, seals and connector, and is the only safe basis for quoting. If the valve was supplied through a machine builder, also give the builder's own part number. State the hydraulic fluid, especially if it is a fire-resistant phosphate ester, since that decides the seal material. For Moog servo motors, send the full model string, as in the G400K example above, and the drive it runs with.

Frequently requested MOOG models: Moog Servo Valves and Proportional Valves.

Facts checked against published Moog company histories, October 2026.

FAQ

Questions about the Moog IN123-825-001 Buffer Amplifier for Servo Valves

Answers from our engineering team on installation, compatibility and integration.

01What is the IN123-825-001 used for?
It interfaces between a PLC output of 4 to 20 mA or plus or minus 10 V, or the output of a servo amplifier, and a Moog servo or proportional valve, converting the signal to the form the valve needs.
02Is the IN123-825-001 the same as G123-825-001?
The manufacturer's datasheet states that the IN123-825-001 is equivalent to the old model G123-825-001.
03What supply does the IN123-825-001 need?
It requires 24 VDC nominal within 22 to 28 V and draws 65 mA at 24 V with no output current. A 250 mA slow-blow fuse is recommended.
04Can the IN123-825-001 help replace a mechanical feedback valve?
Yes. The datasheet says it lets an old mechanical feedback valve be replaced by an electrical feedback valve without changing the existing servo amplifier.
05How do I request a quotation for the IN123-825-001?
Send an RFQ with the part number IN123-825-001, the quantity and the delivery location. Seven Star LLC replies with availability and lead time.