- Automation & ControlView all 2,607 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- HMI Displays
- Pneumatic Cylinders
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Keyence
Keyence LR-X100C Green Laser Sensor, M8 Connector, 100 mm
Description
Keyence LR-X100C: LR-X series green laser sensor with M8 connector
The Keyence LR-X100C is a self-contained laser photoelectric sensor from the LR-X series, built around a green laser and a small stainless-steel head connected to an amplifier section with an M8 connector. It detects targets between 25 mm and 100 mm and supports IO-Link, so it can be configured and read through an IO-Link master as well as used as a conventional switching sensor. Seven Star LLC supplies the Keyence LR-X100C in Oman and the GCC as an independent supplier in Muscat.
Reading the code: LR-X is the series, 100 is the detection range in millimetres, and C indicates the M8 connector type; the cable type of the same range is LR-X100. Siblings include LR-X50C with a 50 mm range and LR-X250C with 250 mm.
The green 505 nm laser is a Class 1 product, and the maker lists a small spot of about 0.3 by 2 mm at 100 mm, so the LR-X100C is good at small parts and fine edges.
LR-X100C technical specifications
| Parameter | Specification |
|---|---|
| Manufacturer / part number | Keyence / LR-X100C |
| Product description | Standard Model, M8 Connector Type, 100 mm range |
| Type | M8 connector type |
| Detecting distance | 25.0 to 100.0 mm |
| Standard detectable deviation | 1.0 mm |
| Display resolution | 0.1 mm |
| Spot size | Approx. 0.3 × 2 mm at 100 mm detecting distance |
| Response time | 500 µs / 1 ms / 3 ms / 10 ms / 200 ms (selectable) |
| Light source | Green laser, 505 nm |
| Laser class | Class 1 laser product (IEC 60825-1, FDA (CDRH) Part 1040.10) |
| IO-Link | Specification v1.1 / COM2 (38.4 kbps) |
| Timer function | Timer OFF / Off-delay / On-delay / One-shot / On-Off delay / On-delay One-shot |
| Control output | NPN or PNP open collector, N.O. / N.C. selectable; 30 VDC or lower, 50 mA or lower, residual voltage 2 V or lower |
| External input | External Set / Laser OFF / Zero Shift / Hold Reset / Gyro Alert RST (selectable) |
| Protection circuits | Reverse power connection, output overcurrent, output surge, reverse output connection |
| Power voltage | 16 to 30 VDC (including 10 % ripple (P-P) or less), class 2 |
| Power consumption | Normal operation 970 mW (38 mA or lower at 24 V); ECO ON/ALL 821 mW (32 mA or lower at 24 V) |
| Enclosure rating | IP65 / IP67 (IEC 60529) |
| Ambient light | Incandescent lamp 16,000 lux or less; sunlight 16,000 lux or less |
| Ambient temperature | -10 to +50 °C, no freezing |
| Relative humidity | 35 to 85 % RH, no condensation |
| Vibration / shock | 10 to 500 Hz, PSD 0.816 G2/Hz in X, Y and Z; 1,000 m/s2, 6 times each axis |
| Material | Head case SUS316L; lens cover PSU; head gasket FKM and EVM; cable PVC; amplifier case PBT |
| Weight | Approx. 35 g |
How the LR-X100C detects a target
The LR-X100C is a distance-based laser sensor: it projects the green laser onto the target and judges the position of the returned spot on a light-receiving element, so a target within the set distance is detected and one beyond it is ignored. This background-ignoring behaviour makes it useful where a conventional reflective sensor would be confused by a bright background.
The amplifier lets you select NPN or PNP and normally open or normally closed logic, set a threshold by teaching, and choose among six timer functions. Response time can be set from 500 µs to 200 ms; fast settings suit counting and quick detection while slow settings average the signal for stability.
With IO-Link at COM2 and 38.4 kbps, the same sensor can be parameterised and monitored by a master without touching the sensor, which saves time when a recipe change or a replacement unit has to be configured.
Where the LR-X100C fits: related LR-X series parts
The LR-X100C is the M8 connector, 100 mm version. LR-X100 is the same range with a cable. LR-X50C offers 50 mm and LR-X250C 250 mm in the same connector format. LR-XH250 is the sensor head used with a separate amplifier.
Because the connector is M8, a ready-made M8 cable can be replaced in the field without cutting the sensor lead; note the maker’s limits of 30 m for the M8 connector type and 20 m when used over IO-Link.
Selecting LR-X100C: ordering checklist
- Detection distance: 25 to 100 mm.
- Connector style: M8 (C) or cable (LR-X100).
- Output polarity and N.O./N.C. logic.
- Whether IO-Link is used and the master cable length (20 m limit).
- Response time needed and timer function.
- Ambient light (16,000 lux) and enclosure rating IP65/IP67.
Installing, commissioning and maintaining LR-X100C
Mount the sensor on a bracket with its laser aimed at the target and the display visible. Use a certified M8 cable and keep the length within 30 m as the maker states, or 20 m for IO-Link.
Teach the threshold with the target in position and test with the worst-case part. Choose the timer only if your PLC needs filtering or pulse stretching; otherwise leave it off to avoid hidden delays.
Wipe the lens cover with a soft dry cloth. The head case is SUS316L stainless steel; avoid hard tools that could scratch the PSU cover. Keep a pre-configured spare for quick replacement.
Typical applications of LR-X100C in Oman and the GCC
The LR-X100C suits small-part detection in electronics assembly, pick and place, and packaging in Oman and the GCC, as well as washdown-prone food and beverage lines where its sealed stainless head is helpful. IO-Link support makes it attractive for modern Industry 4.0 machine builds.
Heat and direct sunlight are limited to the figures in the table, so shade outdoor locations.
LR-X series models compared with LR-X100C
The LR-X family offers several ranges and connection styles.
| Model | Maker description / difference |
|---|---|
| LR-X100C | Standard model, M8 connector, 100 mm range |
| LR-X100 | Standard model, cable type, 100 mm range |
| LR-X50C | Standard model, M8 connector, 50 mm range |
| LR-X250C | Standard model, M8 connector, 250 mm range |
| LR-XH250 | Separate amplifier model, sensor head, 250 mm range, 2 m cable |
Information to send with your LR-X100C RFQ
- Exact part number: LR-X100C, with the quantity and any matching items listed below.
- Detection distance and target size.
- Connector or cable preference.
- Output polarity and IO-Link need.
- Cable lengths and ambient conditions.
- Project reference, delivery location in Oman or the GCC and the lead time you need.
Documents and quotation
Send us the part number LR-X100C and we will confirm the available documents, including the maker datasheet and instruction manual where we can provide them. Prices are quoted per request and are not shown on this page.
Seven Star LLC is an independent supplier in Muscat serving Oman and the GCC. We are not affiliated with the manufacturer, and every quotation states delivery and lead time against your RFQ.
Other Models in the Keyence Lr X Range
Seven Star LLC supplies models from the Keyence Lr X range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.
| Model | Category | |
|---|---|---|
| Keyence LR-X100 Compact Green Laser Distance Sensor, 100 mm | Laser Distance, LiDAR & Radar Sensors | View details |
| Keyence LR-XH250 Green Laser Sensor Head, 250 mm Range | Laser Distance, LiDAR & Radar Sensors | View details |
| Keyence LR-X100C Green Laser Sensor, M8 Connector, 100 mm | Automation Accessories | You are viewing this model |
Reviews (0)
How would you rate this product? Cancel reply
About brand
Keyence is a Japanese maker of sensors, measuring instruments and machine vision, founded in 1974 by Takemitsu Takizaki and headquartered in Osaka. It sells directly to factories and makes photoelectric and laser sensors, code readers, vision systems, measurement systems and microscopes.
Seven Star LLC sources and supplies Keyence sensors and code readers for machine builders and maintenance teams in Oman and the GCC.
Keyence company profile
| Founded | 1974, Japan |
|---|---|
| Founder | Takemitsu Takizaki |
| Headquarters | Osaka, Japan |
| Sales model | Direct sales |
| Product families | LR-Z and LR-W laser and photoelectric sensors, SR-X code readers, IV and CV-X vision systems, LJ-X laser profilers |
Keyence series listed
Three series appear on this page. The LR-Z is a self-contained CMOS laser sensor. Keyence describes it as detecting by distance and by received light, with one-button teaching, a stainless steel body rated IP68/69K and a range of up to 500 mm depending on the model; the LR-ZB250CP is the listed type. The LR-W500C is a full-spectrum reflective photoelectric sensor from the LR-W series. The SR-X100 is an autofocus 2D code reader.
Keyence products we list
Ordering Keyence sensors: what we need
Keyence type codes are short but exact. Send the complete model, such as LR-ZB250CP, because the letters at the end decide the output type and the connection. Remember that many Keyence sensors need a separately ordered cable or connector, and code readers need a cable, a power supply and often a mounting bracket. List those items, the cable length, and the communication interface your PLC uses.
Facts checked against Keyence's published company profile, October 2026.
FAQ
Questions about the Keyence LR-X100C Green Laser Sensor, M8 Connector,
Answers from our engineering team on installation, compatibility and integration.
01What detection distance does the LR-X100C have?
It detects from 25.0 to 100.0 mm, with a standard detectable deviation of 1.0 mm and a display resolution of 0.1 mm.
02Does the LR-X100C support IO-Link?
Yes, it supports IO-Link specification v1.1 at COM2 (38.4 kbps), with a maximum cable length of 20 m when used via IO-Link.
03What laser does it use?
It uses a green laser of 505 nm, classified as a Class 1 laser product.
04Is the output NPN or PNP?
Both are available: the output can be set as NPN or PNP open collector and as N.O. or N.C.
05What is the enclosure rating?
The LR-X100C is rated IP65 and IP67 under IEC 60529.


















Reviews
There are no reviews yet.