- Automation & ControlView all 2,610 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- HMI Displays
- Pneumatic Cylinders
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Keyence
Keyence FS-N14N Digital Fiber Amplifier Expansion Unit, NPN
Description
Keyence FS-N14N: two-output expansion amplifier and its code explained
The Keyence FS-N14N is an expansion unit in the FS-N digital fiber amplifier series. Unlike the main units that carry the power cable, an expansion unit snaps onto a main unit on the DIN rail and draws power through it, so extra detection points cost less wiring. The FS-N14N is the high-functionality version: it offers two NPN control outputs and one external input. Seven Star LLC supplies the FS-N14N in Oman and the GCC as an independent supplier in Muscat.
Reading the code: FS-N is the series, 14 is the high-function two-output expansion position and N is NPN. The maker lists it as Expansion unit with the type High functionality 2 output, cable connection.
Two outputs let one amplifier serve two decisions at once: for example a window comparator with a low and a high limit, or a presence output plus a separate fault output. The external input can be used for calibration commands from the PLC, such as remote teaching.
FS-N14N technical specifications
| Parameter | Specification |
|---|---|
| Manufacturer / part number | Keyence / FS-N14N |
| Product description | Fiber Amplifier, Cable Type, Expansion Unit, NPN |
| Type | High functionality 2 output, cable |
| Output | NPN |
| Main unit / expansion unit | Expansion unit |
| Control output | 2 NPN open collector, 24 V; 100 mA or less per output; 20 mA or less when chained; residual voltage 1 V or less |
| Monitor output (1-5 V) | None |
| External input | 1 (input time 2 ms ON / 20 ms OFF or more; 25 ms or more when external calibration is selected) |
| Light source | Red, 4-element LED |
| APC | ON/OFF switchable (factory setting OFF) |
| Response time | 50 µs (HIGH SPEED) / 250 µs (FINE) / 500 µs (TURBO) / 1 ms (SUPER) / 4 ms (ULTRA) / 16 ms (MEGA) |
| Interference prevention units | 0 for HIGH SPEED; 4 for FINE; 8 for TURBO, SUPER, ULTRA and MEGA |
| Unit expansion | Up to 16 units in total; a two-output type counts as two units |
| Power voltage | 12 to 24 VDC ±10 %, ripple (P-P) 10 % or less |
| Current consumption | Normal 900 mW or less (36 mA at 24 V, 48 mA at 12 V); Eco ON 800 mW or less; Eco FULL 470 mW or less |
| Ambient light | Incandescent lamp 20,000 lux or less; sunlight 30,000 lux or less |
| Ambient temperature | -20 to +55 °C, no freezing (derated with chained units) |
| Relative humidity | 35 to 85 % RH, no condensation |
| Vibration / shock | 10 to 55 Hz, 1.5 mm double amplitude; 500 m/s2 |
| Case material | Polycarbonate |
| Weight | Approx. 70 g |
How the FS-N14N works as an expansion unit
An expansion unit shares the supply and interference-management bus of the main unit it is attached to, but it has its own light source and receiving element, so every unit still watches its own fiber. The FS-N14N compares the received light with its thresholds and drives two NPN outputs, so one fiber can feed two switching decisions without needing two amplifiers.
The external input is used to trigger functions from outside, such as sensitivity calibration while a good part is in position. This is helpful where operators cannot reach the amplifier buttons, because the PLC can run the teach cycle at the start of a batch.
Because it counts as two units on the chain for output current purposes, plan the 16-unit limit with this in mind: a bank made only of two-output expansion units will reach the chain limit with fewer physical amplifiers.
Where the FS-N14N fits: main units and siblings
The FS-N14N needs a main unit beside it. Natural companions are FS-N11N (NPN standard), FS-N11MN (monitor output) and FS-N13N (cable-type NPN main unit); with a PNP main unit such as FS-N11P, check that your PLC input card accepts mixed polarity before combining families. FS-N12CP is the M8 connector, PNP expansion unit for plug-in installation.
Install the FS-N14N after the main unit is chosen: it contains no separate power lead, so the first element in the chain is what sets the supply, the temperature derating and the wiring layout.
Selecting FS-N14N: ordering checklist
- A main unit with matching polarity to sit beside it.
- Whether two outputs and an external input are really needed; if not, a plain expansion unit is simpler.
- Output current of each of the two NPN outputs: keep it at 20 mA or less when chained.
- Fiber type for each channel, which may be different on adjacent amplifiers.
- Total number of units in the chain and the cabinet ambient temperature.
- Response time per channel and interference prevention requirements.
Installing, commissioning and maintaining FS-N14N
Snap the FS-N14N onto the side of its main unit on the same DIN rail and slide the lock to secure the pair. Fit fibers fully, then run the tuning routine on each channel with the actual target.
Wire the two NPN outputs to separate PLC inputs and label both clearly, because the two outputs often carry different meaning, for example detect and fault. If you use the external input for calibration, keep the pulse longer than 25 ms as listed in the table.
During maintenance, replace the whole expansion unit rather than repairing it, and take the opportunity to wipe the fiber tips. Record the output assignment of each channel in your panel documentation so a replacement is quick.
Typical applications of FS-N14N in Oman and the GCC
The FS-N14N is useful in Oman and the GCC for machines that check two states with one sensor, for example filling lines that detect a bottle and confirm its cap in the same fiber path, or conveyors that need a window comparator. High ambient temperatures in unconditioned plant rooms make the derating note important.
It is also valuable in retrofit work on existing lines, where adding a second decision point at the same location avoids pulling extra cables.
FS-N series models compared with FS-N14N
The table helps place the FS-N14N among the other FS-N amplifiers.
| Model | Maker description / difference |
|---|---|
| FS-N14N | Expansion unit, NPN, 2 outputs, external input |
| FS-N11N | Main unit, NPN, standard 1 output |
| FS-N11MN | Main unit, NPN, monitor output |
| FS-N12CP | Expansion unit, PNP, M8 connector |
| FS-N13N | Cable type main unit, NPN |
Information to send with your FS-N14N RFQ
- Exact part number: FS-N14N, with the quantity and any matching items listed below.
- The main unit it will attach to.
- How the two outputs and the external input will be used.
- Fiber unit types for the channel.
- Total chain length and cabinet temperature.
- Project reference, delivery location in Oman or the GCC and the lead time you need.
Documents and quotation
Send us the part number FS-N14N and we will confirm the available documents, including the maker datasheet and instruction manual where we can provide them. Prices are quoted per request and are not shown on this page.
Seven Star LLC is an independent supplier in Muscat serving Oman and the GCC. We are not affiliated with the manufacturer, and every quotation states delivery and lead time against your RFQ.
Other Models in the Keyence Fs N Range
Seven Star LLC supplies models from the Keyence Fs N range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.
| Model | Category | |
|---|---|---|
| Keyence FS-N11N Digital Fiber Amplifier, Main Unit, NPN | Photoelectric Sensors | View details |
| Keyence FS-N12CP Digital Fiber Amplifier, M8 Expansion, PNP | Photoelectric Sensors | View details |
| Keyence FS-N13N Digital Fiber Amplifier, 2-Output, NPN | Photoelectric Sensors | View details |
| Keyence FS-N11P Digital Fiber Amplifier, Main Unit, PNP | Automation Accessories | View details |
| Keyence FS-N11MN Digital Fiber Amplifier, Monitor Output, NPN | Automation Accessories | View details |
| Keyence FS-N14N Digital Fiber Amplifier Expansion Unit, NPN | Automation Accessories | You are viewing this model |
Reviews (0)
How would you rate this product? Cancel reply
About brand
Keyence is a Japanese maker of sensors, measuring instruments and machine vision, founded in 1974 by Takemitsu Takizaki and headquartered in Osaka. It sells directly to factories and makes photoelectric and laser sensors, code readers, vision systems, measurement systems and microscopes.
Seven Star LLC sources and supplies Keyence sensors and code readers for machine builders and maintenance teams in Oman and the GCC.
Keyence company profile
| Founded | 1974, Japan |
|---|---|
| Founder | Takemitsu Takizaki |
| Headquarters | Osaka, Japan |
| Sales model | Direct sales |
| Product families | LR-Z and LR-W laser and photoelectric sensors, SR-X code readers, IV and CV-X vision systems, LJ-X laser profilers |
Keyence series listed
Three series appear on this page. The LR-Z is a self-contained CMOS laser sensor. Keyence describes it as detecting by distance and by received light, with one-button teaching, a stainless steel body rated IP68/69K and a range of up to 500 mm depending on the model; the LR-ZB250CP is the listed type. The LR-W500C is a full-spectrum reflective photoelectric sensor from the LR-W series. The SR-X100 is an autofocus 2D code reader.
Keyence products we list
Ordering Keyence sensors: what we need
Keyence type codes are short but exact. Send the complete model, such as LR-ZB250CP, because the letters at the end decide the output type and the connection. Remember that many Keyence sensors need a separately ordered cable or connector, and code readers need a cable, a power supply and often a mounting bracket. List those items, the cable length, and the communication interface your PLC uses.
Facts checked against Keyence's published company profile, October 2026.
FAQ
Questions about the Keyence FS-N14N Digital Fiber Amplifier Expansion
Answers from our engineering team on installation, compatibility and integration.
01Does the FS-N14N work alone?
It is an expansion unit, so it attaches to a main unit on the DIN rail and draws its power through the chain.
02How many outputs does it have?
It has two NPN open-collector outputs at 24 V, plus one external input for functions such as calibration.
03How does it count in the unit chain?
A two-output type is treated as two units in the 16-unit total, so plan the chain length accordingly.
04What is its response time range?
Response is selectable from 50 microseconds to 16 milliseconds, the same range as other FS-N amplifiers.
05What ambient temperature is allowed?
The base rating is minus 20 to plus 55 °C without freezing, reduced when more units are connected.


















Reviews
There are no reviews yet.