- Automation & ControlView all 2,765 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- HMI Displays
- Pneumatic Cylinders
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Yokogawa
Yokogawa EJX310B Wireless Absolute Pressure Transmitter
Description
Yokogawa EJX310B Wireless Absolute Pressure Transmitter: overview
The Yokogawa EJX310B is a wireless absolute pressure transmitter on the ISA100.11a radio standard. It gives vacuum and absolute pressure points a battery-powered, wire-free option, which is helpful where condensers, evaporators or vent lines are far from the nearest marshalling cabinet.
Seven Star LLC lists the Yokogawa EJX310B for engineers, maintenance planners and procurement teams in Oman and across the GCC who need to replace an installed unit, extend a loop or specify a new instrument for an oil and gas, utility, water or manufacturing project. The page below summarizes the key facts from the manufacturer datasheet so that a first technical review can be done before the full document is opened.
Key features of the EJX310B
- EJX310B communicates with the ISA100.11a protocol at 250 kbps in the license-free 2.4 GHz ISM band.
- Radio security is AES 128 bit, and network joining and parameter setting use infrared communication between devices.
- Update time is selectable from 0.5 second to 60 minutes for the published process value.
- Dedicated lithium-thionyl chloride battery pack, with an external 10.5 to 30 V DC supply as an alternative where available.
- IP66/IP67 and Type 4X enclosure, with a detachable 2 dBi antenna or an N connector for a remote antenna.
- Software download over the wireless link lets the EJX310B firmware be updated without removing the transmitter from the plant.
EJX310B technical specifications
Four capsules cover 0.5 kPa abs to 16 MPa abs. The L capsule serves deep vacuum duties, M serves vacuum up to 130 kPa abs, and A and B serve medium to high absolute pressure. The L capsule has a lower process temperature ceiling of 100 C.
Update time can be selected from 0.5 second to 60 minutes, so fast control-related variables and slow monitoring variables can be handled by the same device type.
The battery pack is replaceable even in hazardous areas for the intrinsically safe type, and the typical life is 10 years at a 30 second update time under the datasheet conditions.
The table lists the main values stated in the datasheet for this model. Values depend on the selected capsule, wetted material and options, so always confirm the final model code with the datasheet before ordering.
| Parameter | Value |
|---|---|
| Type | Wireless absolute pressure transmitter (ISA100.11a) |
| Capsule L span | 0.5 to 10 kPa abs (0.15 to 2.95 inHg abs) |
| Capsule M span | 1.3 to 130 kPa abs (0.39 to 38 inHg abs) |
| Capsule A span | 0.0175 to 3.5 MPa abs (2.5 to 500 psi abs) |
| Capsule B span | 0.08 to 16 MPa abs (12 to 2300 psi abs) |
| Reference accuracy | Plus or minus 0.04% of span for M, A and B capsules (span above the stated limit) |
| Maximum working pressure | L: 10 kPa abs; M: 130 kPa abs; A: 3.5 MPa abs; B: 16 MPa abs |
| Wireless protocol | ISA100.11a, 250 kbps, 2400 to 2483.5 MHz ISM band, AES 128 bit radio security |
| Update time | Selectable from 0.5 second to 60 minutes |
| Power | Battery pack 7.2 V 19 Ah, or external supply 10.5 to 30 V DC |
| Ambient temperature | -40 to 85 C |
| Process temperature | -40 to 120 C (-40 to 100 C for the L capsule) |
| Enclosure | IP66/IP67, Type 4X |
Typical applications in Oman and the GCC
- Oil and gas. Remote wellpads, pipelines and tank farms are typical places for the EJX310B: vacuum and absolute pressure monitoring at remote condensers, evaporators, vent systems and storage tanks, with no need for signal cabling over long distances.
- Utilities and power. Power and utility sites use wireless points like the EJX310B to add monitoring to existing plant without opening cable trays or modifying cabinets.
- Water and desalination. Pumping stations, reservoirs and remote water network points can send data over the ISA100.11a network with a EJX310B, which helps in sites that are far from the control building.
- Manufacturing and process. Brownfield process units and temporary test setups use the EJX310B when a new measurement is needed quickly and a wired point would be costly to install.
Selection and compatibility notes
A EJX310B should be selected together with a wireless network plan. The device talks ISA100.11a on the 2.4 GHz band, so the gateway and any field routers must be placed with line of sight and with the radio environment of the plant in mind. The antenna can be a detachable 2 dBi unit, or a version with an N connector for a remote antenna.
Update time is a trade-off between data freshness and battery life. The datasheet quotes a typical battery life of 10 years at 30 seconds and 5 years at 10 seconds under defined conditions, and vibration or temperature extremes can shorten it, so plan battery replacement in the maintenance calendar and use the external-power version where fast updates are needed permanently.
Check wetted materials, capsule and pressure ratings as for any transmitter in this family, and confirm the intrinsically safe approvals listed in the datasheet for the area where the EJX310B will be installed.
Installation and commissioning of the EJX310B
Install the EJX310B within range of the wireless gateway or a field router, with the antenna pointing upward and clear of large metal obstructions. Join the device to the network using infrared communication, set the update time, and confirm in the gateway that the measurement and the battery status are reported correctly before leaving site.
Record the device tag, network address and update time in the commissioning record, and keep the battery pack installation date for later replacement planning. Perform a zero check with the process isolated before the EJX310B is handed over to operations.
Maintenance and calibration
Maintenance of the EJX310B centers on the battery pack and the network. Review battery status in the gateway, plan pack replacement before the end of the expected life, and check signal quality after plant changes that add metal structures. Verify zero and span against a reference at your usual calibration interval and keep the housing covers and antenna connection tight.
Good wireless practice also includes keeping a record of the network topology, the signal strength reported by each device and the date of the last battery change. Checking these values during routine rounds shows early signs of radio problems or an ageing battery long before a measurement is lost, and it keeps the plant data trustworthy for operators and reliability engineers alike.
Related products and ordering notes for the EJX310B
Other Yokogawa models in the same product area include EJX110B, EJX430B, EJX530B and EJX310A, which may suit neighboring points on the same plant. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer. Product names and model codes are used only to identify compatible equipment.
When you ask for a quotation, state the exact model code, the measuring range, the output type, any hazardous area approval and the quantity. A complete code lets us confirm that the unit matches the installed unit or the project specification, and it avoids delays caused by option mismatches.
Frequently asked questions in short
What is the Yokogawa this model? The Yokogawa this model is a wireless absolute pressure transmitter. The this model is a wireless absolute pressure transmitter on the ISA100.11a radio standard. What measuring ranges does the this model cover? Datasheet values for the EJX310B: 0.5 to 10 kPa abs (0.15 to 2.95 inHg abs); 1.3 to 130 kPa abs (0.39 to 38 inHg abs); 0.0175 to 3.5 MPa abs (2.5 to 500 psi abs); 0.08 to 16 MPa abs (12 to 2300 psi abs). What accuracy and output does the EJX310B provide? For the EJX310B the datasheet gives plus or minus 0.04% of span for m, a and b capsules (span above the stated limit). Output and communication: ISA100.11a, 250 kbps, 2400 to 2483.5 MHz ISM band, AES 128 bit radio security.
Documents and quotation
The manufacturer datasheet for the EJX310B is attached to this page and gives the complete model and suffix codes, dimensions and options. To receive a quotation, send the RFQ with the part number EJX310B, the quantity and your required range and approvals, and the Seven Star LLC team will reply with availability and delivery information for Oman and the GCC.
Datasheets & Documents
- Datasheet Yokogawa EJX310B Wireless Absolute Pressure Transmitter Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
Yokogawa is the Japanese measurement and industrial automation company behind the DPharp EJA and EJX pressure transmitters, CENTUM distributed control systems and ProSafe-RS safety systems. Tamisuke Yokogawa set it up in 1915 as an electric meter research institute in Shibuya, Tokyo. It began selling electric meters in 1917, was incorporated as Yokogawa Electric Works in 1920, and has been Yokogawa Electric Corporation since 1986. In 1975 it released CENTUM, which it describes as the world's first distributed control system.
Seven Star LLC is an independent supplier in Muscat. We list Yokogawa transmitters, flowmeters, analysers, controllers, recorders and CENTUM and ProSafe spare modules, and supply them to oil and gas, power, water and process plants in Oman and the GCC by model code.
Yokogawa at a glance
| Established | 1915, Shibuya, Tokyo, by Tamisuke Yokogawa with Ichiro Yokogawa and Shin Aoki |
|---|---|
| Milestones | Electric meters from 1917; incorporated in 1920; CENTUM DCS in 1975; renamed Yokogawa Electric Corporation in 1986 |
| Headquarters | Tokyo, Japan |
| Product families | Pressure and temperature transmitters, magnetic, vortex and Coriolis flowmeters, liquid and gas analysers, controllers and recorders, CENTUM VP DCS, ProSafe-RS safety systems and STARDOM controllers |
Yokogawa products we list
| Family | Models | Typical use |
|---|---|---|
| Pressure and DP transmitters | EJA110E, EJA430E, EJA530E, EJX110A, EJX530A, EJX910A multivariable | Pressure, level and DP flow measurement in process plants |
| Temperature transmitters | YTA610, YTA710 | RTD and thermocouple signals converted to 4-20 mA, HART or fieldbus |
| Flowmeters | ADMAG AXG, ADMAG AXW, ROTAMASS TI, VY vortex, VF701 | Water and conductive liquids, mass flow of hydrocarbons, steam and gas |
| Analysers | TDLS8000 laser gas analyser, FLXA402, FLXA21 DO, E7042UD zirconia cell, K9471DS cover | Combustion O2, in-situ gas analysis, pH, conductivity and dissolved oxygen |
| Controllers and recorders | UT35A/UT32A, UT32A-D, UT55A/UT52A, UT75A, UP35A/UP32A, UP55A, YS1700, GX10/GX20, GP10/GP20, GM10, µR20000 | Single-loop control, furnace programs and data recording |
| Control and safety systems | CP451-10 processor, ADV161, ADV551, node interface unit, ProSafe-RS, ProSafe-RS Lite, ProSafe-SLS, FCN-500 | Spares and expansions for CENTUM DCS, safety systems and STARDOM |
| Battery packs | S9129FA, S9185FA, S9548FA | Memory backup batteries for DCS and controller modules |
The EJA and EJX transmitters use Yokogawa's DPharp sensor: two silicon resonators whose vibration frequency changes with pressure, so the output is a digital frequency rather than an analogue strain signal. The model code describes the instrument completely. In EJA110E, "110" is a differential pressure transmitter, and the letters after the dash set the span, wetted materials, process connection, electrical output and approvals. When you replace a transmitter, sending the full code from the nameplate avoids a mismatch in range or materials.
Where Yokogawa products are used
In Oman and the GCC, Yokogawa transmitters, analysers and control systems are found in oil and gas production, gas processing and LNG, refineries and petrochemical plants, power and desalination stations, and water treatment. Many plants still run CENTUM CS 3000 and CENTUM VP systems that need spare I/O modules and batteries.
Ordering Yokogawa products: what we need
Send the full model and suffix code from the nameplate (for example EJA110E-JMS5J-912NN/KF22) and the style code. For DCS modules, add the module type and system version. For analysers, send the sensor type, measuring range and process conditions.
Facts checked against Yokogawa's corporate history, October 2026.
Browse Yokogawa products by category: PLC & I/O Cards, Flowmeters, Pressure Instrumentation, Automation Accessories, Temperature Instrumentation.
FAQ
Questions about the Yokogawa EJX310B Wireless Absolute Pressure
Answers from our engineering team on installation, compatibility and integration.
01What is the Yokogawa EJX310B?
The Yokogawa EJX310B is a wireless absolute pressure transmitter. The EJX310B is a wireless absolute pressure transmitter on the ISA100.11a radio standard.
02What measuring ranges does the EJX310B cover?
Datasheet values for the EJX310B: 0.5 to 10 kPa abs (0.15 to 2.95 inHg abs); 1.3 to 130 kPa abs (0.39 to 38 inHg abs); 0.0175 to 3.5 MPa abs (2.5 to 500 psi abs); 0.08 to 16 MPa abs (12 to 2300 psi abs).
03What accuracy and output does the EJX310B provide?
For the EJX310B the datasheet gives plus or minus 0.04% of span for m, a and b capsules (span above the stated limit). Output and communication: ISA100.11a, 250 kbps, 2400 to 2483.5 MHz ISM band, AES 128 bit radio security.
04What network does the EJX310B use?
The EJX310B uses the ISA100.11a wireless protocol in the 2.4 GHz band, with AES 128 bit security, and it must be commissioned through an ISA100.11a gateway.
05How can I request a quotation for the EJX310B in Oman?
Send an RFQ with the part number EJX310B, quantity, range, output and approvals through the inquiry form. Seven Star LLC replies with availability and delivery for Oman and the GCC, and the datasheet is on the product page.


















Reviews
There are no reviews yet.