Speakman Eyesaver SEF-1000 Laboratory Faucet with Eyewash

The Speakman Eyesaver SEF-1000 combines a fully working laboratory faucet spout with an independently operated emergency eyewash in a single deck-mounted fitting. The patented body has two separate water channels, one for the faucet and one for the eyewash, so the emergency water arrives at a tepid temperature when the eyewash is supplied from a tempered source. The spout swivels, the brass body is finished in polished chrome, and a lift-activated eyewash handle is large enough to be found quickly.

It is the type of fitting installed on laboratory benches, sinks in water testing laboratories, workshops and first-aid rooms, where a full eyewash station would take too much space but flushing equipment is still needed beside the work area.

Technical specification

Selection and ordering guide

The sheet covers several Eyesaver models, so confirm the exact code and the faucet center (the page lists 6 to 6 centers and a single hole). A tepid water supply is expected for the eyewash; Speakman recommends its STW-370 thermostatic mixing valve, which is not included, and says to flush the tepid supply into a bucket for one minute before connecting. If shut-off valves are installed in the eyewash supply, the sheet says provision must be made to prevent unauthorized shut off. Inlet supplies are not included.

Installation notes

Shut off the water, remove any existing faucet spout, clean the mounting surface, check the rubber gasket and lower the spout into position, feeding the hoses one at a time through the hole. From below fit the rubber washer, metal washer and nut, verify the swivel sweep and tighten the mounting nut screws. Assemble the tee to the faucet inlet, connect the flex hoses to the existing valve bodies, and connect the tepid water to the eyewash inlet. The valve bodies and handles are not included. Clean with a soft cloth only: harsh chemicals and abrasives can damage the finish and void the warranty. ANSI Z358.1 requires weekly testing and annual inspection, per the sheet.

Applications in GCC industry

This faucet fits laboratory benches in refinery QC and petrochemical labs, desalination and wastewater test laboratories, university and hospital labs, and workshops with a sink. Because the eyewash is plumbed from the building water line, the water temperature in hot climates needs control; the tepid-water recommendation in the sheet and a mixing valve address that, and the site HSE team should define the limits.

Before ordering, confirm the deck thickness, which the page limits to a maximum of 2 in, and the supply pressure of 20 to 80 psi given on the sheet. Keep the 1.2 gpm Slim Air aerator repair group RPG05-111352 in mind as the listed spare for the faucet side of the fitting.

Installation and selection notes

Deck-mount the fitting on a bench or sink with the two water supplies connected correctly, one for the faucet and one for the eyewash, as shown in the installation drawing. Test the eyewash regularly, record the test and keep the area around it clear. Where tepid water is required by the site standard, plan a tempered supply.

Information needed for a quotation

Send the full model code, the quantity, the delivery location in Oman or the GCC, the intended use and any hoses, couplings or accessories needed, so that the complete package can be quoted together.

Documents and supply information

The manufacturer data sheet is attached to this page and should be read together with the project specification before a purchase is confirmed. Ratings, flows, pressures and dimensions are quoted as printed on that sheet. Lead time, stock position and certificates available with the shipment are confirmed in the quotation, and we supply to Oman and the wider GCC region for industrial, utility and building services projects.

Related Speakman products: Speakman Optimus SE-1200 Emergency Shower with Eye/Face Wash, Speakman GravityFlo SE-4000 21-Gallon Portable Eyewash, Speakman Optimus SE-1050 Wall-Mount Eye and Face Wash, Speakman Lifesaver SE-220 Vertical Emergency Deluge Shower, Speakman GravityFlo SE-8000 528-Gallon Emergency Tank Shower and Speakman SE-590 10-Gallon Portable Eyewash with Drench Hose.

Documents and quotation

The Speakman installation sheet 92-SEF-1000-07 for the Eyesaver SEF-1000 is attached to this page. Browse more products in Safety & PPE. Seven Star LLC is an independent supplier in Muscat; send the exact part number and quantity for a quotation, and confirm all ratings and approvals against the current manufacturer documents before ordering.