- Automation & ControlView all 2,467 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- CCTV & Security
- Motor Soft Starters
- Encoders
- Safety Switches & Guard Locking
- HMI Displays
- Pneumatic Cylinders
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Schneider Electric
Schneider Electric XB4BS84441 E-Stop 40 mm Turn Release 2NC+1NO
Description
XB4BS84441 emergency stop with 2 NC + 1 NO and turn to release reset
The XB4BS84441 is an emergency stop push-button from the Harmony XB4 metal range, with a red unmarked mushroom head of 40 mm diameter on a 22 mm mounting. It uses trigger action with mechanical latching, resets by a turn to release action, and carries 2 NC + 1 NO contacts. The datasheet lists it as both an emergency stop and an emergency switching-off push-button. Seven Star LLC supplies the XB4BS84441 in Oman and the GCC as an independent supplier based in Muscat.
This page uses the datasheet to explain what the 2 NC + 1 NO arrangement means for the wiring, how the reset action differs from its siblings and which standards are named on the document.
XB4BS84441 technical specifications
| Parameter | Specification |
|---|---|
| Manufacturer / part number | Schneider Electric / XB4BS84441 |
| Range | Harmony XB4, 22 mm metal |
| Product type | Emergency stop push-button; Emergency switching off push-button |
| Operator | trigger action and mechanical latching |
| Operator profile | Red mushroom Ø 40 mm, unmarked |
| Contacts | 2 NC + 1 NO |
| Terminal marking | (13-14)NO |
| Reset | Turn to release |
| Operating travel | 1.5 mm (NC changing electrical state); 2.6 mm (NO changing electrical state); 4.3 mm (total travel) |
| Positive opening | With (IEC 60947-5-1, appendix K) |
| Mechanical life | 300000 cycles |
| Insulation voltage Ui | 600 V (pollution degree 3) |
| Impulse withstand Uimp | 6 kV |
| Short-circuit protection | 10 A cartridge fuse type gG |
| Terminals | Screw clamp terminals, ≤ 2 × 1.5 mm² with cable end; Screw clamp terminals, ≥ 1 × 0.22 mm² without cable end |
| Dimensions | 47 mm x 40 mm x 82 mm (H x W x D) |
| Ambient temperature, operation | -40–70 °C |
| Degree of protection | IP66, IP69, IP69K |
| Impact protection | IK06 |
| Certifications listed | CSA, LROS, BV, UL listed, DNV |
| Warranty | 18 months |
Latching and turn to release reset of the XB4BS84441
This unit latches down when struck and is reset by turning the head. Turn-to-release is the long-established style: the head cannot be pulled back, it has to be rotated deliberately, which discourages casual resetting. Operating travel is 1.5 mm (NC changing electrical state) and 2.6 mm (NO changing electrical state) and 4.3 mm (total travel). Mechanical life is 300000 cycles.
Contact configuration of the XB4BS84441
This unit combines a block of two NC contacts with one NO contact, so it can serve two stop channels and report to a PLC that the stop is pressed. The NC contacts are rated with positive opening per IEC 60947-5-1 appendix K. Terminal marking given for the first block is (13-14)NO. The safety function and any category or performance level belong to the machine’s risk assessment; the datasheet does not claim a safety category.
Electrically, the XB4BS84441 comes down to a few figures. Thermal current is 10 A, insulation voltage is 600 V (pollution degree 3), impulse withstand is 6 kV, and the contacts are silver alloy (Ag/Ni) with slow-break operation. A 10 A gG cartridge fuse is the protection named in the datasheet. For control duty, size the circuit from the ratings in this list.
- 3 A at 240 V, AC-15, A600
- 6 A at 120 V, AC-15, A600
- 0.1 A at 600 V, DC-13, Q600
- 0.27 A at 250 V, DC-13, Q600
- 0.55 A at 125 V, DC-13, Q600
- 1.2 A at 600 V, AC-15, A600
Standards and environment of the XB4BS84441
Impact protection is IK06. Under vibration the datasheet quotes 5 gn (f= 2–500 Hz). Shock resistance on the datasheet is 30 gn (duration = 18 ms) for half sine wave acceleration and 50 gn (duration = 11 ms) for half sine wave acceleration. For operation the datasheet gives an ambient range of -40–70 °C. Ingress protection is listed as IP66, IP69, IP69K. The standards named on the datasheet are: ISO 13850, IEC 60947-1, IEC 60947-5-5, IEC 60364-5-53, IEC 60947-5-4, IEC 60204-1, UL 508, IEC 60947-5-1, CSA C22.2 No 14, JIS C8201-5-1, JIS C8201-1.
XB4BS84441 compared with the other XB4 emergency stops
Six emergency stops of the same 40 mm mushroom family are compared here: they differ in contact configuration and reset action.
| Part number | Contacts | Reset | Weight | Force | Impact |
|---|---|---|---|---|---|
| XB4BS8442 | 1 NC | Turn to release | 0.118 kg | not listed | IK06 |
| XB4BS8444 | 2 NC | Turn to release | 0.13 kg | not listed | IK06 |
| XB4BS84441 (this page) | 2 NC + 1 NO | Turn to release | n/a | not listed | IK06 |
| XB4BS8445 | 1 NO + 1 NC | Turn to release | 0.13 kg | 44 N | IK06 |
| XB4BT842 | 1 NC | Push-pull | 0.125 kg | not listed | IK06 |
| XB4BT845 | 1 NO + 1 NC | Push-pull | 0.136 kg | 50 N | IK03 |
Selection and installation of the XB4BS84441
- Contacts: 2 NC + 1 NO.
- Reset: turn to release.
- Head: red mushroom, 40 mm, unmarked.
- Panel hole: 22.5 mm; overall depth 82 mm.
- Check the stop function against the machine safety concept before ordering.
Installation starts with a 22.5 mm hole. Tighten to 0.8–1.2 N.m, land the wires on the screw clamp terminals (≤ 2 × 1.5 mm² with cable end and ≥ 1 × 0.22 mm² without cable end) and use a matching screwdriver, either Philips or pozidriv no 1 or a flat 4 or 5.5 mm blade. Mount it where it can be reached quickly and keep the area around the head free.
Commissioning check: operate the head, confirm the NC contacts open and stay open while latched, and test that the machine stops. Test again after any change to the control circuit. Note the result in the commissioning record and test again whenever the circuit is modified.
Where the XB4BS84441 is used in Oman and the GCC
Emergency stops are fitted on pump skids, compressors, conveyors, cranes, packaging lines and process control stations. The IP66 to IP69K sealing in the datasheet suits washdown areas, and the metal body copes with sun, heat and fine sand in outdoor stations. Where the equipment is exported, check that the ordering reference and approvals match the destination rules.
Two NC contacts plus a NO contact make this unit the fullest turn-release variant in this group. The NC pair carry the stop, and the NO contact can tell a PLC or a lamp that the stop has been pressed, which speeds up fault finding because the control system knows the reason for the stoppage.
Location matters as much as the device. Place the stop where an operator can hit it without reaching over moving parts, avoid hiding it behind doors, and keep its label visible in poor light and under dust.
Information to send with an RFQ for the XB4BS84441
An enquiry for this unit is quickest when it names the quantity, the delivery point and the required delivery date. State the contact configuration (NC, NO + NC, 2 NC, 2 NC + 1 NO), the reset type and the panel hole size. Where the unit replaces one already in service, send a picture of its label so we can compare references before quoting.
Documents and quotation
The official Schneider Electric datasheet for this unit is attached on this page, so each figure above can be checked against the source document.
To request a quotation, send the part number XB4BS84441, the quantity and the delivery location through the RFQ form. Seven Star LLC replies with availability and lead time.
Other Models in the Se Harmony Xb4 Es Range
Seven Star LLC supplies models from the Se Harmony Xb4 Es range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.
| Model | Category | |
|---|---|---|
| Schneider Electric XB4BS8442 E-Stop 40 mm Turn Release 1 NC | Automation Accessories | View details |
| Schneider Electric XB4BS8444 E-Stop 40 mm Turn Release 2 NC | Automation Accessories | View details |
| Schneider Electric XB4BS84441 E-Stop 40 mm Turn Release 2NC+1NO | Automation Accessories | You are viewing this model |
| Schneider Electric XB4BS8445 E-Stop 40 mm Turn Release 1NO+1NC | Automation Accessories | View details |
| Schneider Electric XB4BT842 Emergency Stop 40 mm Push-Pull 1 NC | Automation Accessories | View details |
| Schneider Electric XB4BT845 E-Stop 40 mm Push-Pull 1NO+1NC | Automation Accessories | View details |
Datasheets & Documents
- Datasheet Schneider Electric XB4BS84441 Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
Schneider Electric is the French group for energy management and industrial automation: low and medium voltage switchgear and circuit breakers, motor control, drives, PLCs, power monitoring, UPS systems and building management. Its history goes back to 1836, when the brothers Adolphe and Eugène Schneider took over the iron and steel works at Le Creusot in Burgundy. Over the 20th century the company left steel and heavy engineering and became an electrical group through acquisitions such as Merlin Gerin, Télémécanique, Square D and Modicon. Its head office is in Rueil-Malmaison near Paris, and its shares are listed on Euronext Paris.
Schneider Electric company profile
| Origins | 1836, Le Creusot, France: Adolphe and Eugène Schneider take over the Le Creusot foundry |
|---|---|
| Headquarters | Rueil-Malmaison (Paris region), France |
| Ownership | Public company listed on Euronext Paris |
| Key acquisitions | Télémécanique (1988), Square D (1991), Merlin Gerin (1992), Modicon (1997), APC (2007), Invensys (2014); majority owner of AVEVA software |
| Brand names still in use | Acti9, ComPacT and MasterPacT breakers, TeSys motor control, Altivar drives, Altistart soft starters, Modicon PLCs, Harmony control components, PowerLogic and Easergy protection and metering, APC UPS, EcoStruxure software platform |
| Product families | Low voltage distribution, medium voltage switchgear and protection relays, motor control and drives, PLCs and HMIs, power meters, UPS and cooling, enclosures, building automation and energy software |
Milestones
- 1836: The Schneider brothers acquire the Le Creusot works; the business grows in steel, locomotives and heavy engineering.
- 1975: First investment in Merlin Gerin, a French maker of electrical distribution equipment.
- 1988–1992: Télémécanique, Square D (USA) and Merlin Gerin join the group, making it an electrical specialist.
- 1997: Modicon, the company behind the first programmable logic controller, joins the group.
- 1999: The group takes the name Schneider Electric.
- 2007 and 2014: APC (UPS and data centre power) and Invensys (process automation) are acquired.
Choosing Schneider Electric breakers and motor control
Circuit breakers are chosen by current and breaking capacity. Acti9 miniature circuit breakers (iC60, C120) protect final circuits up to 125 A. ComPacT NSX molded case breakers cover about 16 to 630 A, and the letter after the frame size sets the breaking capacity: B, F, N, H, S, L from lowest to highest. MasterPacT air circuit breakers are used as main incomers on large switchboards. For motors, a TeSys contactor with an LRD overload relay or a GV2 motor circuit breaker suits direct starting, an Altistart soft starter reduces starting current, and an Altivar drive controls speed. The breaking capacity must always be at least the prospective short-circuit current at the point of installation.
Where Schneider Electric products are used
In Oman and the GCC, Schneider Electric equipment is found in main and sub-main switchboards of commercial and residential buildings, motor control centres in water, oil and gas and industrial plants, substations protected by Sepam and Easergy relays, data centres powered by Galaxy and APC UPS systems, and buildings controlled by EcoStruxure Building Operation.
APC by Schneider Electric: UPS and critical power
Since 2007, APC has been part of Schneider Electric and is now its product brand for uninterruptible power supplies, replacement batteries, battery packs, network management cards and rack power distribution. Our APC catalogue covers Smart-UPS line-interactive and on-line models, Easy UPS On-Line, the modular Symmetra LX, RM and PX ranges, Silcon three-phase systems and their spare part kits, and the RBC cartridges that keep them running. Schneider Electric breakers, drives and PLCs can be quoted together with APC UPS systems in one request.
Schneider Electric products we list
| Family | Examples |
|---|---|
| Circuit breakers | Acti9 iC60N, C120N, NSX100F, NSX250N, NSX630, EasyPact EZC, MasterPacT MTZ1, MasterPacT NW |
| Motor control | TeSys Deca LC1D, TeSys F, LRD overload relay, GV2ME08, Altistart 22, Altistart 480 |
| Drives | Altivar 12, Altivar 320, ATV340, Altivar Process 630, ATV930, Lexium 32 servo |
| PLCs, HMIs and relays | Modicon M221, M241, M580 BMEP582040, Zelio Logic, Magelis HMISTU655 |
| Protection, metering and power | Sepam series 20, Easergy P3U30, MiCOM P139, PM5560, iEM3255, Galaxy VS UPS |
Ordering Schneider Electric products: what we need
Send the commercial reference from the label (for example LC1D18M7 or ATV320U22N4C). For breakers, confirm the rated current, number of poles, breaking capacity and trip unit. For contactors, give the coil voltage. For drives, give the motor power and supply voltage. APC products are listed on their own brand page.
Facts checked against Schneider Electric's published company history, October 2026.
Browse Schneider Electric products by category: Circuit Breaker, Electrical & Power Modules, AC Drives, PLC & I/O Cards, Metering Systems, UPS and Batteries.
FAQ
Questions about the Schneider Electric XB4BS84441 E-Stop 40 mm Turn
Answers from our engineering team on installation, compatibility and integration.
01What contact arrangement does the XB4BS84441 have?
The datasheet lists 2 NC + 1 NO, marked (13-14)NO. The contacts are slow-break with silver alloy (Ag/Ni) material and a 10 A thermal current.
02What electrical ratings does the XB4BS84441 contact block have?
The datasheet gives 3 A at 240 V AC-15 and 6 A at 120 V AC-15, with a rated insulation voltage of 600 V and a 10 A gG fuse for short-circuit protection. Check these against your control circuit.
03How well is the XB4BS84441 sealed?
The datasheet gives IP66, IP69, IP69K for the degree of protection and an operating range of -40…70 °C. Confirm the rating you need against the exact ordering reference.
04How is the XB4BS84441 reset?
The datasheet gives the reset as turn to release. The head is a red mushroom of 40 mm, with mechanical latching.
05What panel hole and wiring does the XB4BS84441 need?
The mounting diameter is 22.5 mm, and terminals take screw clamp conductors up to 2 x 1.5 mm² with cable ends. The tightening torque is 0.8…1.2 N.m.


















Reviews
There are no reviews yet.