- Automation & ControlView all 2,467 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- CCTV & Security
- Motor Soft Starters
- Encoders
- Safety Switches & Guard Locking
- HMI Displays
- Pneumatic Cylinders
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Schneider Electric
Schneider Electric XB5AP31 Green Booted Push Button
Description
XB5AP31: green projecting booted push-button, spring return, 1 NO
The XB5AP31 is a Schneider Electric Harmony XB5 push-button for a 22 mm hole with a green projecting plastic head, an unmarked cap, a clear protective boot and one normally open (NO) contact. It returns by spring when released. Seven Star LLC supplies the XB5AP31 in Oman and the GCC as an independent supplier based in Muscat, usually for machine panels and starter doors in dusty or wet areas, where the boot protects the head from splash and grit.
Our reading of the code is an interpretation and not a manufacturer table, because the datasheet gives a descriptive title: XB5A is the plastic XB5 push-button family, P marks the projecting booted head, and the digits give colour and contact. Compare it with XB5AP21, XB5AP31, XB5AP42 and XB5AP51 in the table below.
Contact ratings and switching data of the XB5AP31
This unit carries one normally open (NO) contact, with terminals marked (13-14)NO under ISO numbering. The mechanical life is 10 million operations, ten times that of a selector head, because push-buttons are operated constantly.
The datasheet lists a conventional thermal current of 10 A, a rated insulation voltage of 600 V at pollution degree 3 and an impulse withstand of 6 kV, with short-circuit protection by a 10 A gG cartridge fuse. Operational currents are given by utilisation category:
- 3 A at 240 V, AC-15, A600
- 6 A at 120 V, AC-15, A600
- 0.1 A at 600 V, DC-13, Q600
- 0.27 A at 250 V, DC-13, Q600
- 0.55 A at 125 V, DC-13, Q600
The silver alloy (Ag/Ni) contacts have a rated electrical life of 1 million cycles at 2 A, 230 V, AC-15, and the mechanical life stated for the actuator is 1,000,0000 cycles. Reliability at low signal levels is quoted at 5 V and 1 mA in a clean environment, which is useful when the contact feeds a PLC input rather than a coil.
The boot and head of the XB5AP31
The clear boot seals the actuator and keeps dust, oil mist and spray off the head, which is why this booted version is chosen for outdoor panels and washdown areas. The datasheet notes that the boot version is not compatible with a legend holder, so labelling must be on a nameplate beside the button. Green is conventionally the normal or permitted colour: start, run, ready or valve open. Because operators read green as permission to proceed, keep it for commands that really do start or enable something.
The projecting head stands proud of the bezel, so it is easy to find by feel with gloves, but it is also easier to hit accidentally than a flush head. Where accidental operation is a risk, consider a guard ring or a flush head.
Sealing, temperature and approvals of the XB5AP31
The datasheet lists IP66, IP67 protection with IK03 impact resistance, UL type 4X/13 enclosure type. Operation is rated from -40 to 70 °C and storage from -40 to 70 °C. Vibration and shock figures are given in the datasheet (5 gn from 2 to 500 Hz, 30 gn for 18 ms and 50 gn for 11 ms). Certifications listed for this reference: DNV, CSA, UL listed, Lloyd’s Register (LROS), BV.
The button fits a 22.5 mm round hole. Because it is a plastic bezel and collar, tighten the fixing only to the recommended torque. The datasheet drawing gives a clamping thickness of 1 to 6 mm. The body measures 30 mm wide, 42 mm high and 61 mm deep behind the panel face. Terminals are screw clamps for up to two 1.5 mm² conductors with cable ends, or at least 0.22 mm² without ends, and the recommended tightening torque is 0.8 to 1.2 N.m.
How the XB5AP31 operates
This unit has one NO contact: the circuit is open at rest and closes when the button is pressed, the normal logic for a start, jog or acknowledge. The contact changes state after 2.6 mm of travel, of a 4.3 mm total, at an operating force of 3.8 N. This reference is listed without positive opening, which is acceptable for start-type functions but not for a stop.
Where the XB5AP31 is used in Oman and the GCC
Booted push-buttons are used on pump and fan starters, packaged skids, conveyor and hoist controls and outdoor panels. In coastal plants and desalination sites the clear boot keeps salt-laden dust off the head, and in oil and gas facilities it resists dirt and splash in utility areas. It is the simple choice for a start, jog or acknowledge command that must survive daily use.
Technical specifications of the XB5AP31
| Parameter | Specification |
|---|---|
| Manufacturer / part number | Schneider Electric / XB5AP31 |
| Range | Harmony XB5 |
| Product type | Push-button |
| Operator | Green projecting, unmarked, clear boot, spring return |
| Contacts | 1 NO, without positive opening |
| Terminal marking (ISO) | (13-14)NO |
| Bezel / collar | Dark grey plastic |
| Mounting diameter | 22.5 mm |
| Dimensions (H x W x D) | 42 mm × 30 mm × 61 mm |
| Net weight | 0.039 kg |
| Operating travel | 2.6 mm (NO changing electrical state) / 4.3 mm (total travel) |
| Operating force | 3.8 N NO changing electrical state |
| Mechanical durability | 10,000,000 cycles |
| Thermal current [Ith] | 10 A |
| Insulation voltage [Ui] | 600 V, pollution degree 3 |
| Impulse withstand [Uimp] | 6 kV |
| Degree of protection | IP66, IP67 |
| Operating temperature | -40 to 70 °C |
| Storage temperature | -40 to 70 °C |
| Certifications | DNV, CSA, UL listed, Lloyd’s Register (LROS), BV |
| Warranty | 18 months |
XB5AP31 among the XB5AP booted push-buttons
Four booted push-buttons share the head, boot and rating and separate by colour and contact. Siblings of this unit: XB5AP21, XB5AP42, XB5AP51.
| Reference | Key attributes |
|---|---|
| XB5AP21 | black projecting, unmarked, 1 NO, clear boot |
| XB5AP31 | green projecting, unmarked, 1 NO, clear boot |
| XB5AP42 | red projecting, unmarked, 1 NC, clear boot |
| XB5AP51 | yellow projecting, unmarked, 1 NO, clear boot |
Selection checklist and RFQ information for XB5AP31
Send the points below so that the part number can be confirmed against the datasheet and checked for availability in one reply.
- Part number XB5AP31 and the required quantity.
- Head colour (green) and contact required (1 NO).
- Whether a booted, unmarked head is acceptable, since no legend holder can be fitted.
- Panel thickness and fixing hole size.
- Any approval the project asks for, compared with the datasheet list.
- Delivery location in Oman or the GCC and the lead time you need.
Documents and quotation
The Schneider Electric datasheet for the XB5AP31 is attached on this page for your technical file. It carries the electrical, mechanical and environmental data summarised above, together with the dimension drawing and the panel cut-out details.
To request a quotation, send the part number and quantity through the enquiry form and we will reply with availability and delivery terms. Seven Star LLC is an independent supplier and does not act for the manufacturer, so please check the datasheet against your project requirements before ordering.
Other Models in the Se Xb5 Pushbutton Range
Seven Star LLC supplies models from the Se Xb5 Pushbutton range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.
| Model | Category | |
|---|---|---|
| Schneider Electric XB5AP21 Black Booted Push Button | Automation Accessories | View details |
| Schneider Electric XB5AP31 Green Booted Push Button | Automation Accessories | You are viewing this model |
| Schneider Electric XB5AP42 Red Booted Push Button | Automation Accessories | View details |
| Schneider Electric XB5AP51 Yellow Booted Push Button | Automation Accessories | View details |
Datasheets & Documents
- Datasheet Schneider Electric XB5AP31 Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
Schneider Electric is the French group for energy management and industrial automation: low and medium voltage switchgear and circuit breakers, motor control, drives, PLCs, power monitoring, UPS systems and building management. Its history goes back to 1836, when the brothers Adolphe and Eugène Schneider took over the iron and steel works at Le Creusot in Burgundy. Over the 20th century the company left steel and heavy engineering and became an electrical group through acquisitions such as Merlin Gerin, Télémécanique, Square D and Modicon. Its head office is in Rueil-Malmaison near Paris, and its shares are listed on Euronext Paris.
Schneider Electric company profile
| Origins | 1836, Le Creusot, France: Adolphe and Eugène Schneider take over the Le Creusot foundry |
|---|---|
| Headquarters | Rueil-Malmaison (Paris region), France |
| Ownership | Public company listed on Euronext Paris |
| Key acquisitions | Télémécanique (1988), Square D (1991), Merlin Gerin (1992), Modicon (1997), APC (2007), Invensys (2014); majority owner of AVEVA software |
| Brand names still in use | Acti9, ComPacT and MasterPacT breakers, TeSys motor control, Altivar drives, Altistart soft starters, Modicon PLCs, Harmony control components, PowerLogic and Easergy protection and metering, APC UPS, EcoStruxure software platform |
| Product families | Low voltage distribution, medium voltage switchgear and protection relays, motor control and drives, PLCs and HMIs, power meters, UPS and cooling, enclosures, building automation and energy software |
Milestones
- 1836: The Schneider brothers acquire the Le Creusot works; the business grows in steel, locomotives and heavy engineering.
- 1975: First investment in Merlin Gerin, a French maker of electrical distribution equipment.
- 1988–1992: Télémécanique, Square D (USA) and Merlin Gerin join the group, making it an electrical specialist.
- 1997: Modicon, the company behind the first programmable logic controller, joins the group.
- 1999: The group takes the name Schneider Electric.
- 2007 and 2014: APC (UPS and data centre power) and Invensys (process automation) are acquired.
Choosing Schneider Electric breakers and motor control
Circuit breakers are chosen by current and breaking capacity. Acti9 miniature circuit breakers (iC60, C120) protect final circuits up to 125 A. ComPacT NSX molded case breakers cover about 16 to 630 A, and the letter after the frame size sets the breaking capacity: B, F, N, H, S, L from lowest to highest. MasterPacT air circuit breakers are used as main incomers on large switchboards. For motors, a TeSys contactor with an LRD overload relay or a GV2 motor circuit breaker suits direct starting, an Altistart soft starter reduces starting current, and an Altivar drive controls speed. The breaking capacity must always be at least the prospective short-circuit current at the point of installation.
Where Schneider Electric products are used
In Oman and the GCC, Schneider Electric equipment is found in main and sub-main switchboards of commercial and residential buildings, motor control centres in water, oil and gas and industrial plants, substations protected by Sepam and Easergy relays, data centres powered by Galaxy and APC UPS systems, and buildings controlled by EcoStruxure Building Operation.
APC by Schneider Electric: UPS and critical power
Since 2007, APC has been part of Schneider Electric and is now its product brand for uninterruptible power supplies, replacement batteries, battery packs, network management cards and rack power distribution. Our APC catalogue covers Smart-UPS line-interactive and on-line models, Easy UPS On-Line, the modular Symmetra LX, RM and PX ranges, Silcon three-phase systems and their spare part kits, and the RBC cartridges that keep them running. Schneider Electric breakers, drives and PLCs can be quoted together with APC UPS systems in one request.
Schneider Electric products we list
| Family | Examples |
|---|---|
| Circuit breakers | Acti9 iC60N, C120N, NSX100F, NSX250N, NSX630, EasyPact EZC, MasterPacT MTZ1, MasterPacT NW |
| Motor control | TeSys Deca LC1D, TeSys F, LRD overload relay, GV2ME08, Altistart 22, Altistart 480 |
| Drives | Altivar 12, Altivar 320, ATV340, Altivar Process 630, ATV930, Lexium 32 servo |
| PLCs, HMIs and relays | Modicon M221, M241, M580 BMEP582040, Zelio Logic, Magelis HMISTU655 |
| Protection, metering and power | Sepam series 20, Easergy P3U30, MiCOM P139, PM5560, iEM3255, Galaxy VS UPS |
Ordering Schneider Electric products: what we need
Send the commercial reference from the label (for example LC1D18M7 or ATV320U22N4C). For breakers, confirm the rated current, number of poles, breaking capacity and trip unit. For contactors, give the coil voltage. For drives, give the motor power and supply voltage. APC products are listed on their own brand page.
Facts checked against Schneider Electric's published company history, October 2026.
Browse Schneider Electric products by category: Circuit Breaker, Electrical & Power Modules, AC Drives, PLC & I/O Cards, Metering Systems, UPS and Batteries.
FAQ
Questions about the Schneider Electric XB5AP31 Green Booted Push Button
Answers from our engineering team on installation, compatibility and integration.
01Is the XB5AP31 normally open or normally closed?
The datasheet lists one normally open (NO) contact. It closes the circuit when pressed and is listed without positive opening.
02What does the boot of the XB5AP31 do?
It is a clear protective boot over the head. The datasheet states that this version is not compatible with a legend holder.
03What panel hole does the XB5AP31 need?
A 22.5 mm round hole with a clamping thickness of 1 to 6 mm. Terminals are screw clamps.
04What protection rating does the XB5AP31 list?
IP66, IP67 and IK03 impact resistance, with operation from -40 to 70 °C.
05Does Seven Star LLC supply the XB5AP31 in Oman?
Yes, as an independent supplier in Muscat serving Oman and the GCC. Send the part number and quantity and we confirm availability and documents.


















Reviews
There are no reviews yet.