- Automation & ControlView all 2,316 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- CCTV & Security
- Safety Switches & Guard Locking
- Encoders
- Motor Soft Starters
- HMI Displays
- Pneumatic Cylinders
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Schneider Electric
Schneider Electric XA2EVF3LC XA2E green LED pilot light 110 V
Description
XA2EVF3LC: XA2E green LED pilot light, 22 mm, 110 V AC/DC
The XA2EVF3LC is a Schneider Electric Harmony XA2 monolithic pilot light with a green round lens and an integral clustered LED, powered from 110 V AC/DC. It fits a 22 mm panel hole and is supplied without a replaceable bulb, because the light source is part of the unit. Seven Star LLC supplies the XA2EVF3LC in Oman and the GCC as an independent supplier in Muscat.
No lifecycle notice appears on the datasheet used for this page, which is dated 8 Nov 2026. The product title adds the words Anti-interference; the datasheet does not expand on them, so confirm any requirement that depends on this wording before ordering.
LED light source and supply of the XA2EVF3LC
The datasheet lists a COB clustered LED, no bulb base, steady signalling and a rated supply voltage of 110 V AC/DC. Current consumption is at most 20 mA, and the service life is given as 40000 h at rated voltage and 25 °C. At that service life, the lamp is effectively a fit-and-forget part, but the figure assumes rated voltage and moderate temperature.
Because the supply is 110 V AC/DC, the same lamp works on a DC control bus or an AC control transformer, which simplifies stocking. At 110 V this version suits control circuits at that voltage; never connect it to a 24 V supply or to mains. The terminals are marked as shown in the datasheet (X1-X2) and polarity does not need to be observed on AC.
Technical specifications of the XA2EVF3LC
| Parameter | Specification |
|---|---|
| Manufacturer / part number | Schneider Electric / XA2EVF3LC |
| Range / short name | Harmony XA2 / XA2 |
| Product type | Monolithic pilot light |
| Head shape | Round |
| Lens colour | Green |
| Light source | COB clustered LED |
| Bulb base | No bulb |
| Rated supply voltage [Us] | 110 V AC/DC |
| Signalling type | Steady |
| Current consumption | ≤ 20 mA |
| Service life | 40000 h at rated voltage and 25 °C |
| Terminal marking | (X1-X2)PL |
| Mounting diameter | 22.5 mm |
| Mounting hole | Fixing hole – diameter: 22.5 mm ± 0.2 conforming to IEC 60947-5-1 |
| Panel fixing | at least 30 x 40 mm support panel metal – 1–6 mm; at least 30 x 40 mm support panel plastic – 2–6 mm |
| Fixing nut torque | 2.2 N.m (± 0.2 N.m) |
| Terminals | Screw clamp, ≤ 2 × 1.5 mm² with cable end ; Screw clamp, 1 × 0.5–1 × 2.5 mm² without cable end |
| Terminal torque | 0.8–1 N.m |
| Screw head | Cross compatible with Philips No 2 screwdriver; Slotted compatible with flat Ø 4 mm screwdriver; Slotted compatible with flat Ø 5.5 mm screwdriver |
| Rated insulation voltage [Ui] | 400 V (pollution degree 3) |
| Rated impulse withstand [Uimp] | 6 kV conforming to IEC 60947-1 |
| Dimensions (W x H x D) | 29 mm x 29 mm x 53 mm |
| Net weight | 0.02 kg |
| Operating temperature | -25–70 °C |
| Storage temperature | -40–70 °C |
| Protection | IP65 conforming to IEC 60529; IK05 |
| Overvoltage category | Class I conforming to IEC 61140 |
| Vibration resistance | 5 gn (f= 12–500 Hz) conforming to IEC 60068-2-6 |
| Shock resistance | 30 gn (duration = 11 ms) for half sine wave acceleration conforming to IEC 60068-2-27 |
| Standards | IEC 60947-1; IEC 60947-5-1; GB 14048.5; GB 14048.1; IEC 60529; IEC 50102 |
| Marking / certifications | CCC; CE |
Lens colour and signalling role of the XA2EVF3LC
Green normally signals that equipment is running or in a normal, safe condition, so this lens suits run, ready and healthy-supply indications. A pilot light is only as clear as its label, so engrave or mount a legend plate beside this unit that states exactly what the lamp indicates.
Keep one meaning per colour across the whole panel and across sister panels at the site, so that operators on different shifts read the lamps the same way. If two lamps of the same colour mean different things, a distinguishing legend is essential.
Mounting and wiring of the XA2EVF3LC
The pilot light mounts in a hole of 22.5 mm ± 0.2, secured by a nut beneath the head with a recommended torque of 2.2 N.m (± 0.2 N.m). The panel can be metal 1–6 mm thick or plastic 2–6 mm thick, with at least 30 x 40 mm of support area. The unit is 29 mm wide, 29 mm high and 53 mm deep and weighs 0.02 kg.
Wiring uses screw clamp terminals for up to 2 x 1.5 mm² with cable end or 1 x 0.5–2.5 mm² without, tightened to 0.8–1 N.m. The screw heads accept a No 2 Philips driver or a flat 4 mm or 5.5 mm blade.
The XA2EVF3LC among XA2E pilot lights
The six pilot lights in this range of references share one body and LED source. They differ only in lens colour and supply voltage.
| Reference | Lens colour | Supply | Current consumption |
|---|---|---|---|
| XA2EVB3LC | Green | 24 V AC/DC | ≤ 20 mA |
| XA2EVB4LC | Red | 24 V AC/DC | ≤ 20 mA |
| XA2EVB5LC | Amber | 24 V AC/DC | ≤ 20 mA |
| XA2EVB6LC | Blue | 24 V AC/DC | ≤ 20 mA |
| XA2EVF1LC | White | 110 V AC/DC | ≤ 20 mA |
| XA2EVF3LC (this page) | Green | 110 V AC/DC | ≤ 20 mA |
Choose the colour for the meaning you need and the voltage to match the panel control supply.
Installation and replacement notes for the XA2EVF3LC
Before fitting, check that the supply is 110 V AC/DC and that it is a steady rather than a flashing signal, since the datasheet lists steady signalling only. Fit the unit in the panel hole, tighten the nut to the recommended torque and connect the two terminals; no polarity is needed on AC.
When replacing a failed lamp, match colour, voltage and size. Do not mix a 24 V and a 110 V version in the same panel row without clear marking, as the lenses look identical. Test with a lamp-test button or by briefly energising the circuit and record the reference this unit in the panel drawing.
Information to send with an RFQ for the XA2EVF3LC
- Full reference (this unit) and quantity, and whether it is a spare or part of a new build.
- Required lens colour and supply voltage (this reference is green, 110 V AC/DC).
- Control voltage and current of the circuit the contacts will switch.
- Panel cut-out size and thickness.
- Delivery location in Oman or the GCC and the required date.
Documents and quotation
The manufacturer datasheet for the XA2EVF3LC is attached on this page and carries the full specification summarised above. Check the revision date on the datasheet against your project requirement.
To request a quotation, send the part number XA2EVF3LC, the quantity and your delivery location in Oman or the GCC. Seven Star LLC replies with availability and lead time as an independent supplier.
Other Models in the Se Xa2e Pilot Range
Seven Star LLC supplies models from the Se Xa2e Pilot range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.
| Model | Category | |
|---|---|---|
| Schneider Electric XA2EVB3LC XA2E green LED pilot light 24 V | Automation Accessories | View details |
| Schneider Electric XA2EVB4LC XA2E red LED pilot light 24 V | Automation Accessories | View details |
| Schneider Electric XA2EVB5LC XA2E amber LED pilot light 24 V | Automation Accessories | View details |
| Schneider Electric XA2EVB6LC XA2E blue LED pilot light 24 V | Automation Accessories | View details |
| Schneider Electric XA2EVF1LC XA2E white LED pilot light 110 V | Automation Accessories | View details |
| Schneider Electric XA2EVF3LC XA2E green LED pilot light 110 V | Automation Accessories | You are viewing this model |
Datasheets & Documents
- Datasheet Schneider Electric XA2EVF3LC Datasheet Download
Reviews (0)
About brand
Schneider Electric is the French group for energy management and industrial automation: low and medium voltage switchgear and circuit breakers, motor control, drives, PLCs, power monitoring, UPS systems and building management. Its history goes back to 1836, when the brothers Adolphe and Eugène Schneider took over the iron and steel works at Le Creusot in Burgundy. Over the 20th century the company left steel and heavy engineering and became an electrical group through acquisitions such as Merlin Gerin, Télémécanique, Square D and Modicon. Its head office is in Rueil-Malmaison near Paris, and its shares are listed on Euronext Paris.
Schneider Electric company profile
| Origins | 1836, Le Creusot, France: Adolphe and Eugène Schneider take over the Le Creusot foundry |
|---|---|
| Headquarters | Rueil-Malmaison (Paris region), France |
| Ownership | Public company listed on Euronext Paris |
| Key acquisitions | Télémécanique (1988), Square D (1991), Merlin Gerin (1992), Modicon (1997), APC (2007), Invensys (2014); majority owner of AVEVA software |
| Brand names still in use | Acti9, ComPacT and MasterPacT breakers, TeSys motor control, Altivar drives, Altistart soft starters, Modicon PLCs, Harmony control components, PowerLogic and Easergy protection and metering, APC UPS, EcoStruxure software platform |
| Product families | Low voltage distribution, medium voltage switchgear and protection relays, motor control and drives, PLCs and HMIs, power meters, UPS and cooling, enclosures, building automation and energy software |
Milestones
- 1836: The Schneider brothers acquire the Le Creusot works; the business grows in steel, locomotives and heavy engineering.
- 1975: First investment in Merlin Gerin, a French maker of electrical distribution equipment.
- 1988–1992: Télémécanique, Square D (USA) and Merlin Gerin join the group, making it an electrical specialist.
- 1997: Modicon, the company behind the first programmable logic controller, joins the group.
- 1999: The group takes the name Schneider Electric.
- 2007 and 2014: APC (UPS and data centre power) and Invensys (process automation) are acquired.
Choosing Schneider Electric breakers and motor control
Circuit breakers are chosen by current and breaking capacity. Acti9 miniature circuit breakers (iC60, C120) protect final circuits up to 125 A. ComPacT NSX molded case breakers cover about 16 to 630 A, and the letter after the frame size sets the breaking capacity: B, F, N, H, S, L from lowest to highest. MasterPacT air circuit breakers are used as main incomers on large switchboards. For motors, a TeSys contactor with an LRD overload relay or a GV2 motor circuit breaker suits direct starting, an Altistart soft starter reduces starting current, and an Altivar drive controls speed. The breaking capacity must always be at least the prospective short-circuit current at the point of installation.
Where Schneider Electric products are used
In Oman and the GCC, Schneider Electric equipment is found in main and sub-main switchboards of commercial and residential buildings, motor control centres in water, oil and gas and industrial plants, substations protected by Sepam and Easergy relays, data centres powered by Galaxy and APC UPS systems, and buildings controlled by EcoStruxure Building Operation.
APC by Schneider Electric: UPS and critical power
Since 2007, APC has been part of Schneider Electric and is now its product brand for uninterruptible power supplies, replacement batteries, battery packs, network management cards and rack power distribution. Our APC catalogue covers Smart-UPS line-interactive and on-line models, Easy UPS On-Line, the modular Symmetra LX, RM and PX ranges, Silcon three-phase systems and their spare part kits, and the RBC cartridges that keep them running. Schneider Electric breakers, drives and PLCs can be quoted together with APC UPS systems in one request.
Schneider Electric products we list
| Family | Examples |
|---|---|
| Circuit breakers | Acti9 iC60N, C120N, NSX100F, NSX250N, NSX630, EasyPact EZC, MasterPacT MTZ1, MasterPacT NW |
| Motor control | TeSys Deca LC1D, TeSys F, LRD overload relay, GV2ME08, Altistart 22, Altistart 480 |
| Drives | Altivar 12, Altivar 320, ATV340, Altivar Process 630, ATV930, Lexium 32 servo |
| PLCs, HMIs and relays | Modicon M221, M241, M580 BMEP582040, Zelio Logic, Magelis HMISTU655 |
| Protection, metering and power | Sepam series 20, Easergy P3U30, MiCOM P139, PM5560, iEM3255, Galaxy VS UPS |
Ordering Schneider Electric products: what we need
Send the commercial reference from the label (for example LC1D18M7 or ATV320U22N4C). For breakers, confirm the rated current, number of poles, breaking capacity and trip unit. For contactors, give the coil voltage. For drives, give the motor power and supply voltage. APC products are listed on their own brand page.
Facts checked against Schneider Electric's published company history, October 2026.
Browse Schneider Electric products by category: Circuit Breaker, Electrical & Power Modules, AC Drives, PLC & I/O Cards, Metering Systems, UPS and Batteries.
FAQ
Questions about the Schneider Electric XA2EVF3LC XA2E green LED pilot
Answers from our engineering team on installation, compatibility and integration.
01What is the XA2EVF3LC?
A Harmony XA2 monolithic pilot light with a green round lens, integral COB clustered LED and 110 V AC/DC supply, for a 22.5 mm panel hole.
02What is the supply and consumption of the XA2EVF3LC?
The rated supply voltage is 110 V AC/DC and the current consumption is at most 20 mA. Signalling is steady.
03How long does the LED of the XA2EVF3LC last?
The datasheet gives a service life of 40000 h at rated voltage and 25 °C. There is no replaceable bulb.
04What protection does the XA2EVF3LC have?
IP65 at the front and IK05, operating from -25–70 °C.
05What size is the XA2EVF3LC?
It is 29 mm wide, 29 mm high and 53 mm deep and weighs 0.02 kg.
Reviews
There are no reviews yet.