Schneider Electric XB4BT842 Emergency Stop 40 mm Push-Pull 1 NC

Description

XB4BT842 emergency stop with 1 NC and push-pull reset

The XB4BT842 is an emergency stop push-button from the Harmony XB4 metal range, with a red unmarked mushroom head of 40 mm diameter on a 22 mm mounting. It uses trigger action with mechanical latching, resets by a push-pull action, and carries 1 NC contacts. The datasheet lists it as both an emergency stop and an emergency switching-off push-button. Seven Star LLC supplies the XB4BT842 in Oman and the GCC as an independent supplier based in Muscat.

This page uses the datasheet to explain what the 1 NC arrangement means for the wiring, how the reset action differs from its siblings and which standards are named on the document.

XB4BT842 technical specifications

Parameter Specification
Manufacturer / part number Schneider Electric / XB4BT842
Range Harmony XB4, 22 mm metal
Product type Emergency stop push-button; Emergency switching off push-button
Operator trigger action and mechanical latching
Operator profile Red mushroom Ø 40 mm, unmarked
Contacts 1 NC
Terminal marking (21-22)NC
Reset Push-pull
Operating travel 1.5 mm (NC changing electrical state); 4.3 mm (total travel)
Positive opening With (IEC 60947-5-1, appendix K)
Insulation voltage Ui 600 V (pollution degree 3)
Impulse withstand Uimp 6 kV
Short-circuit protection 10 A cartridge fuse type gG
Terminals Screw clamp terminals, ≤ 2 × 1.5 mm² with cable end; Screw clamp terminals, ≥ 1 × 0.22 mm² without cable end
Dimensions 47 mm x 40 mm x 82 mm (H x W x D)
Net weight 0.125 kg
Ambient temperature, operation -40–70 °C
Degree of protection IP66, IP67, IP69, IP69K
Impact protection IK06
Certifications listed CSA, LROS, BV, UL listed, DNV
Warranty 18 months

Latching and push-pull reset of the XB4BT842

This unit latches down when struck and is reset by pulling the head back up. Push-pull reset gives a quick, one-handed release that is common where the head is easy to reach; the trade-off is that a pull can be done more casually than a deliberate turn, so many sites choose the style in their own safety procedure. Operating travel is 1.5 mm (NC changing electrical state) and 4.3 mm (total travel).

Contact configuration of the XB4BT842

This unit has a single NC contact and the push-pull reset, giving a one-contact stop circuit with a quick release. The NC contacts are rated with positive opening per IEC 60947-5-1 appendix K. Terminal marking given for the first block is (21-22)NC. The safety function and any category or performance level belong to the machine’s risk assessment; the datasheet does not claim a safety category.

The contact block of this unit is a slow-break design with silver alloy (Ag/Ni) contacts. The datasheet gives a conventional thermal current of 10 A, a rated insulation voltage of 600 V (pollution degree 3) and a rated impulse withstand of 6 kV. Short-circuit protection is a 10 A gG cartridge fuse. Rated operational currents are listed below, and they are the figures to use for relay coils, contactor coils and PLC inputs on the control circuit.

  • 3 A at 240 V, AC-15, A600
  • 6 A at 120 V, AC-15, A600
  • 0.1 A at 600 V, DC-13, Q600
  • 0.27 A at 250 V, DC-13, Q600
  • 0.55 A at 125 V, DC-13, Q600
  • 1.2 A at 600 V, AC-15, A600

Standards and environment of the XB4BT842

For operation the datasheet gives an ambient range of -40–70 °C. The degree of protection is IP66, IP67, IP69, IP69K. Impact protection is IK06. Vibration resistance is 5 gn (f= 2–500 Hz). For shock the datasheet quotes 30 gn (duration = 18 ms) for half sine wave acceleration and 50 gn (duration = 11 ms) for half sine wave acceleration. The standards named on the datasheet are: IEC 60947-5-1, IEC 60204-1, IEC 60947-5-4, JIS C8201-5-1, UL 508, IEC 60364-5-53, ISO 13850, IEC 60947-1, IEC 60947-5-5, CSA C22.2 No 14, JIS C8201-1.

XB4BT842 compared with the other XB4 emergency stops

Six emergency stops of the same 40 mm mushroom family are compared here: they differ in contact configuration and reset action.

Part number Contacts Reset Weight Force Impact
XB4BS8442 1 NC Turn to release 0.118 kg not listed IK06
XB4BS8444 2 NC Turn to release 0.13 kg not listed IK06
XB4BS84441 2 NC + 1 NO Turn to release n/a not listed IK06
XB4BS8445 1 NO + 1 NC Turn to release 0.13 kg 44 N IK06
XB4BT842 (this page) 1 NC Push-pull 0.125 kg not listed IK06
XB4BT845 1 NO + 1 NC Push-pull 0.136 kg 50 N IK03

Selection and installation of the XB4BT842

  • Contacts: 1 NC.
  • Reset: push-pull.
  • Head: red mushroom, 40 mm, unmarked.
  • Panel hole: 22.5 mm; overall depth 82 mm.
  • Check the stop function against the machine safety concept before ordering.

Fit this unit through a 22.5 mm panel hole and tighten the fixing to 0.8–1.2 N.m. Terminals accept ≤ 2 × 1.5 mm² with cable end and ≥ 1 × 0.22 mm² without cable end; screw heads take Philips no 1, pozidriv no 1, or flat 4 and 5.5 mm drivers. Mount it where it can be reached quickly and keep the area around the head free.

At commissioning, operate the head, confirm the NC contacts open and stay open while latched, and test that the machine stops. Test again after any change to the control circuit. Re-test after any rewiring, and keep a record of the tested state with the panel documents.

Where the XB4BT842 is used in Oman and the GCC

Emergency stops are fitted on pump skids, compressors, conveyors, cranes, packaging lines and process control stations. The IP66 to IP69K sealing in the datasheet suits washdown areas, and the metal body copes with sun, heat and fine sand in outdoor stations. Where the equipment is exported, check that the ordering reference and approvals match the destination rules.

This unit adds the push-pull reset to a single NC contact. Where the head sits at waist height on a control desk, a pull reset is quick and needs no wrist movement, which some operators prefer. The datasheet lists its impact protection as IK06, the same as the turn-release versions.

An emergency stop only works if people can reach it. Mount the head at an accessible height, keep the area around it clear, and use a distinct legend plate so that the stop is clearly identified. Test the function at agreed intervals, including the reset action, and record the results.

Information to send with an RFQ for the XB4BT842

Please give us the exact reference XB4BT842, how many pieces you need and where they are going in Oman or the GCC. State the contact configuration (NC, NO + NC, 2 NC, 2 NC + 1 NO), the reset type and the panel hole size. For a replacement job, a clear photo of the old device and its marking removes any doubt about the match.

Documents and quotation

The official Schneider Electric datasheet for this unit is attached on this page, so each figure above can be checked against the source document.

To request a quotation, send the part number XB4BT842, the quantity and the delivery location through the RFQ form. Seven Star LLC replies with availability and lead time.

Other Models in the Se Harmony Xb4 Es Range

Seven Star LLC supplies models from the Se Harmony Xb4 Es range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
Schneider Electric XB4BS8442 E-Stop 40 mm Turn Release 1 NCAutomation AccessoriesView details
Schneider Electric XB4BS8444 E-Stop 40 mm Turn Release 2 NCAutomation AccessoriesView details
Schneider Electric XB4BS84441 E-Stop 40 mm Turn Release 2NC+1NOAutomation AccessoriesView details
Schneider Electric XB4BS8445 E-Stop 40 mm Turn Release 1NO+1NCAutomation AccessoriesView details
Schneider Electric XB4BT842 Emergency Stop 40 mm Push-Pull 1 NCAutomation AccessoriesYou are viewing this model
Schneider Electric XB4BT845 E-Stop 40 mm Push-Pull 1NO+1NCAutomation AccessoriesView details
Datasheets & Documents
  • PDF Datasheet Schneider Electric XB4BT842 Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Schneider Electric is the French group for energy management and industrial automation: low and medium voltage switchgear and circuit breakers, motor control, drives, PLCs, power monitoring, UPS systems and building management. Its history goes back to 1836, when the brothers Adolphe and Eugène Schneider took over the iron and steel works at Le Creusot in Burgundy. Over the 20th century the company left steel and heavy engineering and became an electrical group through acquisitions such as Merlin Gerin, Télémécanique, Square D and Modicon. Its head office is in Rueil-Malmaison near Paris, and its shares are listed on Euronext Paris.

Schneider Electric company profile

Origins 1836, Le Creusot, France: Adolphe and Eugène Schneider take over the Le Creusot foundry
Headquarters Rueil-Malmaison (Paris region), France
Ownership Public company listed on Euronext Paris
Key acquisitions Télémécanique (1988), Square D (1991), Merlin Gerin (1992), Modicon (1997), APC (2007), Invensys (2014); majority owner of AVEVA software
Brand names still in use Acti9, ComPacT and MasterPacT breakers, TeSys motor control, Altivar drives, Altistart soft starters, Modicon PLCs, Harmony control components, PowerLogic and Easergy protection and metering, APC UPS, EcoStruxure software platform
Product families Low voltage distribution, medium voltage switchgear and protection relays, motor control and drives, PLCs and HMIs, power meters, UPS and cooling, enclosures, building automation and energy software

Milestones

  • 1836: The Schneider brothers acquire the Le Creusot works; the business grows in steel, locomotives and heavy engineering.
  • 1975: First investment in Merlin Gerin, a French maker of electrical distribution equipment.
  • 1988–1992: Télémécanique, Square D (USA) and Merlin Gerin join the group, making it an electrical specialist.
  • 1997: Modicon, the company behind the first programmable logic controller, joins the group.
  • 1999: The group takes the name Schneider Electric.
  • 2007 and 2014: APC (UPS and data centre power) and Invensys (process automation) are acquired.

Choosing Schneider Electric breakers and motor control

Circuit breakers are chosen by current and breaking capacity. Acti9 miniature circuit breakers (iC60, C120) protect final circuits up to 125 A. ComPacT NSX molded case breakers cover about 16 to 630 A, and the letter after the frame size sets the breaking capacity: B, F, N, H, S, L from lowest to highest. MasterPacT air circuit breakers are used as main incomers on large switchboards. For motors, a TeSys contactor with an LRD overload relay or a GV2 motor circuit breaker suits direct starting, an Altistart soft starter reduces starting current, and an Altivar drive controls speed. The breaking capacity must always be at least the prospective short-circuit current at the point of installation.

Where Schneider Electric products are used

In Oman and the GCC, Schneider Electric equipment is found in main and sub-main switchboards of commercial and residential buildings, motor control centres in water, oil and gas and industrial plants, substations protected by Sepam and Easergy relays, data centres powered by Galaxy and APC UPS systems, and buildings controlled by EcoStruxure Building Operation.

APC by Schneider Electric: UPS and critical power

Since 2007, APC has been part of Schneider Electric and is now its product brand for uninterruptible power supplies, replacement batteries, battery packs, network management cards and rack power distribution. Our APC catalogue covers Smart-UPS line-interactive and on-line models, Easy UPS On-Line, the modular Symmetra LX, RM and PX ranges, Silcon three-phase systems and their spare part kits, and the RBC cartridges that keep them running. Schneider Electric breakers, drives and PLCs can be quoted together with APC UPS systems in one request.

Schneider Electric products we list

Family Examples
Circuit breakers Acti9 iC60N, C120N, NSX100F, NSX250N, NSX630, EasyPact EZC, MasterPacT MTZ1, MasterPacT NW
Motor control TeSys Deca LC1D, TeSys F, LRD overload relay, GV2ME08, Altistart 22, Altistart 480
Drives Altivar 12, Altivar 320, ATV340, Altivar Process 630, ATV930, Lexium 32 servo
PLCs, HMIs and relays Modicon M221, M241, M580 BMEP582040, Zelio Logic, Magelis HMISTU655
Protection, metering and power Sepam series 20, Easergy P3U30, MiCOM P139, PM5560, iEM3255, Galaxy VS UPS

Ordering Schneider Electric products: what we need

Send the commercial reference from the label (for example LC1D18M7 or ATV320U22N4C). For breakers, confirm the rated current, number of poles, breaking capacity and trip unit. For contactors, give the coil voltage. For drives, give the motor power and supply voltage. APC products are listed on their own brand page.

Facts checked against Schneider Electric's published company history, October 2026.

FAQ

Questions about the Schneider Electric XB4BT842 Emergency Stop 40 mm

Answers from our engineering team on installation, compatibility and integration.

01What contact arrangement does the XB4BT842 have?
The datasheet lists 1 NC, marked (21-22)NC. The contacts are slow-break with silver alloy (Ag/Ni) material and a 10 A thermal current.
02What electrical ratings does the XB4BT842 contact block have?
The datasheet gives 3 A at 240 V AC-15 and 6 A at 120 V AC-15, with a rated insulation voltage of 600 V and a 10 A gG fuse for short-circuit protection. Check these against your control circuit.
03How well is the XB4BT842 sealed?
The datasheet gives IP66, IP67, IP69, IP69K for the degree of protection and an operating range of -40…70 °C. Confirm the rating you need against the exact ordering reference.
04How is the XB4BT842 reset?
The datasheet gives the reset as push-pull. The head is a red mushroom of 40 mm, with mechanical latching.
05What panel hole and wiring does the XB4BT842 need?
The mounting diameter is 22.5 mm, and terminals take screw clamp conductors up to 2 x 1.5 mm² with cable ends. The tightening torque is 0.8…1.2 N.m.