Schneider Electric XB5AS9445 Key-Release E-Stop 1 NC + 1 NO

Description

XB5AS9445: red Ø40 mushroom emergency stop, key release, 1 NC + 1 NO

The XB5AS9445 is a Schneider Electric Harmony XB5 emergency switching-off push-button with a red Ø40 mushroom head for a 22 mm panel hole. The head latches mechanically when pressed and is reset by key release; the contact set is one NC and one NO contact. Seven Star LLC supplies the XB5AS9445 in Oman and the GCC as an independent supplier based in Muscat, typically to panel builders and maintenance teams that need a latching stop button on a control station, pump panel or machine pendant.

The datasheet describes the product in words, so our reading of the code is an interpretation and not a manufacturer table: XB5AS is the red mushroom emergency-stop family, and the last digits distinguish the reset method and contacts. Compare it with the other five references in the table below, XB5AS542N, XB5AS8442, XB5AS8444, XB5AS9442, XB5AS9445 and XB5AT842.

Selection checklist and RFQ information for XB5AS9445

Send the points below so that the part number can be confirmed against the datasheet and checked for availability in one reply.

  • Part number XB5AS9445 and the required quantity.
  • Reset method (key release) and contacts (1 NC + 1 NO).
  • Whether the project requires ISO 13850 or IEC 60947-5-5 listing in the datasheet.
  • Key arrangement if a key release is chosen.
  • Depth available behind the panel.
  • Delivery location in Oman or the GCC and the lead time you need.

Standards and safety function of the XB5AS9445

The standards named in the datasheet include IEC 60947-5-5, ISO 13850, IEC 60204-1 and IEC 60364-5-53. These are the documents the product data refers to, and a machine builder remains responsible for the safety function and the risk assessment of the whole machine.

Mechanical life is 300,000 cycles, a lower figure than a normal push-button because an emergency stop is an infrequent, deliberate operation. Test it on a regular schedule: press, confirm the stop, reset and confirm a restart is still needed.

Contact ratings and switching data of the XB5AS9445

This unit carries one NC and one NO contact, terminals marked (11-12)NC, (13-14)NO under ISO numbering. Contacts are slow-break and the datasheet lists the usual 10 A thermal rating.

The datasheet lists a conventional thermal current of 10 A, a rated insulation voltage of 600 V at pollution degree 3 and an impulse withstand of 6 kV, with short-circuit protection by a 10 A gG cartridge fuse. Operational currents are given by utilisation category:

  • 3 A at 240 V, AC-15, A600
  • 6 A at 120 V, AC-15, A600
  • 0.1 A at 600 V, DC-13, Q600
  • 0.27 A at 250 V, DC-13, Q600
  • 0.55 A at 125 V, DC-13, Q600

The silver alloy (Ag/Ni) contacts have a rated electrical life of 1 million cycles at 2 A, 230 V, AC-15, and the mechanical life stated for the actuator is 300000 cycles. Reliability at low signal levels is quoted at 5 V and 1 mA in a clean environment, which is useful when the contact feeds a PLC input rather than a coil.

Typical uses of XB5AS9445 in Oman and the GCC

Latching emergency stops are fitted to control stations, pump and compressor panels, conveyors, crane pendants, test benches and packaged skids across industrial sites in the region. In oil and gas and petrochemical plants they are placed at escape routes and at local panels; in power and desalination plants they sit at dosing and pump stations where heat, dust and humidity are normal. The key-release version is selected where only authorised staff may restart.

XB5AS9445 among the red mushroom emergency-stop references

The six references separate on reset method (turn, key or push-pull), contact set and range. XB5AS542N belongs to the older XB5N/XB7N range with IP65 and a CE mark only, while the other five are the main XB5 range with IP66 and wider approvals. Siblings of this unit: XB5AS542N, XB5AS8442, XB5AS8444, XB5AS9442, XB5AT842.

Reference Key attributes
XB5AS542N turn to release, 1 NC, 22.5 mm hole, 78.5 mm deep
XB5AS8442 turn to release, 1 NC, 22.5 mm hole, 82 mm deep
XB5AS8444 turn to release, 2 NC, 22 mm hole, 82 mm deep
XB5AS9442 key release, 1 NC, 22 mm hole, 100 mm deep
XB5AS9445 key release, 1 NC + 1 NO, 22 mm hole, 100 mm deep
XB5AT842 push-pull, 1 NC, 22 mm hole, 82 mm deep

How the XB5AS9445 latches and resets

Pressing the head latches it, and it can be released only with the Key 455 lock, with key withdrawal in the centre position according to the datasheet. This stops an operator from resetting the stop without authority, which suits plants that require a supervisor to confirm that it is safe before restart. Take care that the key is stored, because every unit with the same lock number accepts the same key.

With one NC and one NO contact the stop circuit opens when the head is pressed while the NO contact closes, which can drive an alarm or a PLC input that records the stop condition. The datasheet lists positive opening to IEC 60947-5-1 appendix K, so the contacts are forced apart by the actuator, even if they have welded.

Sealing, temperature and approvals of the XB5AS9445

The datasheet lists IP66, IP67, IP69, IP69K protection with IK03 impact resistance, UL type 4X/13 enclosure type. Operation is rated from -40 to 70 °C and storage from -40 to 70 °C. Certifications listed for this reference: CSA, Lloyd’s Register (LROS), BV, UL listed, DNV.

This unit fits a 22 mm round hole in the panel. The body is 100 mm deep behind the panel, which is the deepest in the group because the key lock sits behind the head. The mushroom head is 40 mm wide, and the datasheet gives 43 mm for the height of the unit. The datasheet gives a weight of 0.112 kg. The datasheet drawing gives a clamping thickness of 1 to 6 mm. The body measures 40 mm wide, 43 mm high and 100 mm deep behind the panel face. Terminals are screw clamps for up to two 1.5 mm² conductors with cable ends, or at least 0.22 mm² without ends, and the recommended tightening torque is 0.8 to 1.2 N.m.

Technical specifications of the XB5AS9445

Parameter Specification
Manufacturer / part number Schneider Electric / XB5AS9445
Range Harmony XB5
Product type Emergency stop push-button / Emergency switching off push-button
Operator Red mushroom Ø40 mm, unmarked
Latching / reset trigger action and mechanical latching; Key release
Contacts 1 NC + 1 NO, positive opening
Terminal marking (ISO) (11-12)NC, (13-14)NO
Key lock Key 455, withdrawal center
Mounting diameter 22 mm
Dimensions (H x W x D) 43 mm × 40 mm × 100 mm
Net weight 0.112 kg
Mechanical durability 300,000 cycles
Thermal current [Ith] 10 A
Insulation voltage [Ui] 600 V, pollution degree 3
Impulse withstand [Uimp] 6 kV
Degree of protection IP66, IP67, IP69, IP69K
Operating temperature -40 to 70 °C
Storage temperature -40 to 70 °C
Certifications CSA, Lloyd’s Register (LROS), BV, UL listed, DNV
Warranty 18 months

Documents and quotation

The Schneider Electric datasheet for the XB5AS9445 is attached on this page for your technical file. It carries the electrical, mechanical and environmental data summarised above, together with the dimension drawing and the panel cut-out details.

To request a quotation, send the part number and quantity through the enquiry form and we will reply with availability and delivery terms. Seven Star LLC is an independent supplier and does not act for the manufacturer, so please check the datasheet against your project requirements before ordering.

Other Models in the Se Xb5 Estop Range

Seven Star LLC supplies models from the Se Xb5 Estop range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
Schneider Electric XB5AS542N Turn-Release E-Stop 1 NCAutomation AccessoriesView details
Schneider Electric XB5AS8442 Turn-Release E-Stop 1 NCAutomation AccessoriesView details
Schneider Electric XB5AS8444 Turn-Release E-Stop 2 NCAutomation AccessoriesView details
Schneider Electric XB5AS9442 Key-Release E-Stop 1 NCAutomation AccessoriesView details
Schneider Electric XB5AS9445 Key-Release E-Stop 1 NC + 1 NOAutomation AccessoriesYou are viewing this model
Schneider Electric XB5AT842 Push-Pull E-Stop 1 NCAutomation AccessoriesView details
Datasheets & Documents
  • PDF Datasheet Schneider Electric XB5AS9445 Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Schneider Electric is the French group for energy management and industrial automation: low and medium voltage switchgear and circuit breakers, motor control, drives, PLCs, power monitoring, UPS systems and building management. Its history goes back to 1836, when the brothers Adolphe and Eugène Schneider took over the iron and steel works at Le Creusot in Burgundy. Over the 20th century the company left steel and heavy engineering and became an electrical group through acquisitions such as Merlin Gerin, Télémécanique, Square D and Modicon. Its head office is in Rueil-Malmaison near Paris, and its shares are listed on Euronext Paris.

Schneider Electric company profile

Origins 1836, Le Creusot, France: Adolphe and Eugène Schneider take over the Le Creusot foundry
Headquarters Rueil-Malmaison (Paris region), France
Ownership Public company listed on Euronext Paris
Key acquisitions Télémécanique (1988), Square D (1991), Merlin Gerin (1992), Modicon (1997), APC (2007), Invensys (2014); majority owner of AVEVA software
Brand names still in use Acti9, ComPacT and MasterPacT breakers, TeSys motor control, Altivar drives, Altistart soft starters, Modicon PLCs, Harmony control components, PowerLogic and Easergy protection and metering, APC UPS, EcoStruxure software platform
Product families Low voltage distribution, medium voltage switchgear and protection relays, motor control and drives, PLCs and HMIs, power meters, UPS and cooling, enclosures, building automation and energy software

Milestones

  • 1836: The Schneider brothers acquire the Le Creusot works; the business grows in steel, locomotives and heavy engineering.
  • 1975: First investment in Merlin Gerin, a French maker of electrical distribution equipment.
  • 1988–1992: Télémécanique, Square D (USA) and Merlin Gerin join the group, making it an electrical specialist.
  • 1997: Modicon, the company behind the first programmable logic controller, joins the group.
  • 1999: The group takes the name Schneider Electric.
  • 2007 and 2014: APC (UPS and data centre power) and Invensys (process automation) are acquired.

Choosing Schneider Electric breakers and motor control

Circuit breakers are chosen by current and breaking capacity. Acti9 miniature circuit breakers (iC60, C120) protect final circuits up to 125 A. ComPacT NSX molded case breakers cover about 16 to 630 A, and the letter after the frame size sets the breaking capacity: B, F, N, H, S, L from lowest to highest. MasterPacT air circuit breakers are used as main incomers on large switchboards. For motors, a TeSys contactor with an LRD overload relay or a GV2 motor circuit breaker suits direct starting, an Altistart soft starter reduces starting current, and an Altivar drive controls speed. The breaking capacity must always be at least the prospective short-circuit current at the point of installation.

Where Schneider Electric products are used

In Oman and the GCC, Schneider Electric equipment is found in main and sub-main switchboards of commercial and residential buildings, motor control centres in water, oil and gas and industrial plants, substations protected by Sepam and Easergy relays, data centres powered by Galaxy and APC UPS systems, and buildings controlled by EcoStruxure Building Operation.

APC by Schneider Electric: UPS and critical power

Since 2007, APC has been part of Schneider Electric and is now its product brand for uninterruptible power supplies, replacement batteries, battery packs, network management cards and rack power distribution. Our APC catalogue covers Smart-UPS line-interactive and on-line models, Easy UPS On-Line, the modular Symmetra LX, RM and PX ranges, Silcon three-phase systems and their spare part kits, and the RBC cartridges that keep them running. Schneider Electric breakers, drives and PLCs can be quoted together with APC UPS systems in one request.

Schneider Electric products we list

Family Examples
Circuit breakers Acti9 iC60N, C120N, NSX100F, NSX250N, NSX630, EasyPact EZC, MasterPacT MTZ1, MasterPacT NW
Motor control TeSys Deca LC1D, TeSys F, LRD overload relay, GV2ME08, Altistart 22, Altistart 480
Drives Altivar 12, Altivar 320, ATV340, Altivar Process 630, ATV930, Lexium 32 servo
PLCs, HMIs and relays Modicon M221, M241, M580 BMEP582040, Zelio Logic, Magelis HMISTU655
Protection, metering and power Sepam series 20, Easergy P3U30, MiCOM P139, PM5560, iEM3255, Galaxy VS UPS

Ordering Schneider Electric products: what we need

Send the commercial reference from the label (for example LC1D18M7 or ATV320U22N4C). For breakers, confirm the rated current, number of poles, breaking capacity and trip unit. For contactors, give the coil voltage. For drives, give the motor power and supply voltage. APC products are listed on their own brand page.

Facts checked against Schneider Electric's published company history, October 2026.

FAQ

Questions about the Schneider Electric XB5AS9445 Key-Release E-Stop 1

Answers from our engineering team on installation, compatibility and integration.

01How is the XB5AS9445 reset?
By key release, according to the datasheet. The head latches mechanically when pressed. The key is Key 455 and is withdrawn in the centre position.
02What contacts does the XB5AS9445 have?
The datasheet lists one NC and one NO contact with positive opening to IEC 60947-5-1 appendix K.
03What panel hole does the XB5AS9445 need?
A 22 mm round hole; the body is 100 mm deep behind the panel.
04Which standards does the datasheet list for the XB5AS9445?
CSA C22.2 No 14, IEC 60204-1, IEC 60364-5-53, IEC 60947-1, IEC 60947-5-1, IEC 60947-5-4, IEC 60947-5-5, ISO 13850, JIS C8201-1, JIS C8201-5-1, UL 508.
05Does Seven Star LLC supply the XB5AS9445 in Oman?
Yes, as an independent supplier in Muscat serving Oman and the GCC. Send the part number and quantity and we confirm availability and documents.