- Automation & ControlView all 2,481 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- CCTV & Security
- Motor Soft Starters
- Encoders
- Safety Switches & Guard Locking
- HMI Displays
- Pneumatic Cylinders
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Rittal
Rittal SK 3237.100 Fan-and-Filter Unit 116.5 mm
Description
SK 3237.100 fan-and-filter unit decoded
The Rittal SK 3237.100 is a fan-and-filter unit of the TopTherm fan-and-filter unit range, 116.5 x 116.5 x 43 mm. It is the smallest of the TopTherm fan-and-filter units, moving only a modest volume of filtered air through a 92 x 92 mm cut-out. Seven Star LLC supplies SK 3237.100 in Oman and the GCC as an independent supplier in Muscat, not affiliated with the manufacturer.
The table below decodes the main identifiers of SK 3237.100 so that it can be matched to a cabinet drawing.
| Element | Value | Meaning |
|---|---|---|
| SK | Product family prefix | Climate control accessory for enclosures |
| SK 3237.100 | Article number | Fixes size, output class and voltage in the manufacturer catalogue |
| 20 m³/h free-flow air throughput at 50 Hz | Duty point | Headline output or air figure used to pick this unit |
| 230 V, 1~, 50/60 Hz | Supply | Single-phase supply usable at 50 Hz and 60 Hz |
| 116.5 x 116.5 x 43 mm | Outer dimensions | Width x height x depth of the unit |
SK 3237.100 technical specifications
| Parameter | Specification |
|---|---|
| Manufacturer / part number | Rittal / SK 3237.100 |
| Air throughput, free flow with chopped-fibre filter | 20 m³/h at 50 Hz, 25 m³/h at 60 Hz |
| Air throughput with outlet filter 3237.200 | 15/18 m³/h with one filter, 16/20 m³/h with two (50/60 Hz) |
| Rated operating voltage | 230 V, 1~, 50/60 Hz |
| Power consumption | 12 W at 50 Hz, 10 W at 60 Hz |
| Rated current (max.) | 0.065 A at 50 Hz, 0.07 A at 60 Hz |
| Fan motor | Shaded-pole motor |
| Mounting cut-out | 92 x 92 mm |
| Dimensions (W x H) / installation depth | 116.5 x 116.5 mm / 43 mm |
| IP rating (IEC 60529) | IP 54 with chopped-fibre filter; IP 56 with filter and hose-proof hood |
| NEMA type | Type 12 with filter; Type 3 and 3R with filter and hose-proof hood |
| Fan service life (L10, 40 °C) | 55,000 h at 50 Hz, 60,000 h at 60 Hz |
| Noise level | 38 dB(A) at 50 Hz, 43 dB(A) at 60 Hz |
| Operating temperature range | -15 °C to 55 °C |
| Electrical connection | Two single wires, about 300 mm long |
| Pre-fuse | 2 A miniature circuit-breaker / fuse |
| Net weight | 0.38 kg |
| Approvals listed on the article page | KC Korea, CSA, UL + C-UL FTTA, UR + C-UR (recognized) |
Values come from the manufacturer article page for SK 3237.100. Cooling data are catalogue test points; real performance depends on the temperature difference, the condition of the filters and the airflow around the unit.
How the SK 3237.100 fan-and-filter unit works
A fan-and-filter unit blows ambient air through a filter mat into the enclosure; an outlet filter lets the warmer air escape. It changes the enclosure air with filtered outside air, so it can only work while the ambient air is cooler than the allowed internal temperature and clean enough for the filter to cope.
Sizing SK 3237.100 for an enclosure
Airflow needed follows from the heat balance: temperature rise inside = 3.1 x dissipated power in W / air flow in m³/h. Example: with 40 W of losses and the free-flow throughput of 20 m³/h of SK 3237.100 the rise above ambient is about 6.2 K. Throughput drops once an outlet filter is used and as the filter loads with dust, so keep a margin and check that the maximum internal temperature of your devices is respected.
Selection and ordering checklist for SK 3237.100
- Total dissipated power of all equipment in the enclosure, in watts, plus the heat gain from sun and hot walls.
- Maximum permitted internal temperature of the most sensitive device, and the setpoint you want.
- Ambient temperature range on site, including summer peaks in Oman and the GCC.
- Cut-out of 92 x 92 mm and a matching outlet filter on the opposite side or higher up.
- Filter class for the dust level, and the hose-proof hood where the site is washed or sprayed.
- Supply of 230 V and a 2 A pre-fuse.
Installation, commissioning and maintenance of SK 3237.100
- Cut the opening to the stated size, place the unit and fix it with the clamping parts, ensuring the gasket seats evenly.
- Fit the outlet filter at a distance to ensure airflow crosses the equipment.
- Replace the filter mat when it is visibly dirty; in dusty sites check weekly at first and set an interval from experience.
- Add the hose-proof hood where water spray is expected to reach the IP 56 rating.
- Do not mix filter classes without checking the airflow table.
Apply local rules for electrical connection, and record the setpoint and alarm settings used at commissioning.
Typical applications of SK 3237.100 in Oman and the GCC
Because air throughput is small, it suits compact enclosures with little loss: terminal boxes, small PLC cabinets and instrument housings that only need a gentle air change to avoid heat pockets and condensation.
Conditions in the Gulf are hard on enclosure electronics: summer ambient temperatures regularly exceed 45 °C, humidity near the coast leads to condensation when panels cool at night, and fine dust blocks filters quickly. Oil and gas, power, desalination and petrochemical sites therefore treat climate control as part of the panel design rather than an add-on.
Fan-and-filter units compared against SK 3237.100
A larger or smaller fan-and-filter unit changes air throughput and cut-out size. The two units below are described on this site; the page also lists matching outlet filters 3237.200 and 3239.200.
| Article | Design | Free-flow air (50 Hz, chopped-fibre filter) | W x H x D (mm) |
|---|---|---|---|
| SK 3237.100 (this item) | Fan-and-filter | 20 m³/h | 116.5 x 116.5 x 43 |
| SK 3239.100 | Fan-and-filter | 100 m³/h | 204 x 204 x 90 |
Information to send with an RFQ for SK 3237.100
To quote correctly we need a few details:
- Exact article number SK 3237.100 and the quantity.
- Enclosure size, material and surface area, and the room or site where it stands.
- Total heat loss in watts and the highest internal temperature allowed.
- Ambient temperature range, dust and humidity conditions.
- Supply voltage, frequency and available pre-fuse.
- Mounting position, cut-out availability and any condensate or water connection constraints.
- Delivery location in Oman or the GCC and the date needed.
Documents and quotation
A technical details document for SK 3237.100 is attached on this page, giving dimensions and installation drawings; check the article number printed on it.
Send the part number SK 3237.100 and the quantity to Seven Star LLC and we will confirm availability, lead time and delivery to your site in Oman or the GCC.
Datasheets & Documents
- Datasheet Rittal SK 3237.100 Technical Details Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
Rittal is a German manufacturer of enclosures, power distribution, climate control and IT infrastructure, founded in 1961 by Rudolf Loh in Rittershausen, Hesse, as Rudolf Loh Elektrogerätebau. In its first year it launched the first standard enclosure, built in series and available from stock instead of made to order. Rittal is headquartered in Herborn and belongs to the family-owned Friedhelm Loh Group.
Seven Star LLC is an independent supplier in Muscat. We list Rittal enclosures, cooling units and power distribution products for panel builders and maintenance teams in Oman and the GCC.
Rittal company profile
| Founded | 1961, Rittershausen (Dietzhölztal), Germany, by Rudolf Loh |
|---|---|
| Headquarters | Herborn, Hesse, Germany |
| Ownership | Friedhelm Loh Group (Loh family); sister companies include Eplan and Cideon |
| Idea | Standard enclosures in series production, available from stock |
| Product families | VX25 and AX/KX enclosures, TS 8 baying systems, Blue e+ cooling units and fan-and-filter units, RiLine busbar systems, IT racks and data centre modules |
Milestones
- 1961: Rudolf Loh founds the company and launches the first standard enclosure.
- 1969: The company takes the Rittal name, according to Rittal.
- 2021: Rittal marks 60 years.
Rittal product series
Enclosures include the TS 8 free-standing bayable system, AE compact enclosures such as the AE 1380.500 and AE 1034.500, and the CS outdoor wall-mounted enclosure. For hazardous areas there are the KEL 9404.600 stainless steel and AX 9206.100 plastic Ex enclosures. Power distribution is covered by the VX25 Ri4Power switchgear system and its 185 mm busbar system.
Climate control includes Blue e+ wall-mounted cooling units, the TopTherm Blue e SK 3273.500 roof-mounted unit and the LCP Inline CW liquid cooling package for IT racks.
Where Rittal products are used
Machine and process control panels, motor control and power distribution switchboards, outdoor telecom and utility cabinets, junction boxes in hazardous areas and IT racks. In the Gulf, cabinet cooling is often the deciding factor for reliable electronics.
Rittal products we list
Ordering Rittal products: what we need
Rittal parts are ordered by a seven-digit model number such as 9404.600. Send that number, or the width, height and depth, material, protection category and door arrangement. For cooling units add the cooling output, rated voltage and mounting cut-out of the unit being replaced; for Ex enclosures, the zone and marking required.
Facts checked against Rittal's own company pages and Friedhelm Loh Group material, October 2026.
Browse Rittal products by category: Automation Accessories, Switchgear, Enclosures & Distribution, Enclosure Climate Control.
FAQ
Questions about the Rittal SK 3237.100 Fan-and-Filter Unit 116.5 mm
Answers from our engineering team on installation, compatibility and integration.
01How much air does SK 3237.100 move?
The page lists 20 m³/h at 50 Hz with a chopped-fibre filter in free flow. The throughput is lower when an outlet filter is installed, so use the characteristic data for the real case.
02What cut-out does SK 3237.100 need?
The mounting cut-out is 92 x 92 mm, with an installation depth as listed in the specification table.
03What IP rating can SK 3237.100 reach?
With its filter the unit is rated IP 54; with a hose-proof hood the page lists IP 56 and higher NEMA types where applicable. The hood is needed where spray reaches the enclosure.
04How loud and how long-lived is SK 3237.100?
The page lists a noise level of 38 dB(A) at 50 Hz and 43 dB(A) at 60 Hz and a fan service life (L10 at 40 °C) of 55,000 h at 50 Hz.
05Does Seven Star LLC provide a document for SK 3237.100?
Yes, a technical details document is attached on this page. Send the part number SK 3237.100 and the quantity to Seven Star LLC for availability and lead time in Oman and the GCC.


















Reviews
There are no reviews yet.