- Automation & ControlView all 2,538 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- CCTV & Security
- Motor Soft Starters
- Encoders
- HMI Displays
- Pneumatic Cylinders
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Parker
Parker 4Z-B6LJ-SSP B Series Ball Valve 1/4″ CPI
Description
4Z-B6LJ-SSP B6 stainless steel two-way ball valve, 1/4" CPI tube ends
The Parker 4Z-B6LJ-SSP is a two-way, quarter-turn ball valve from the B Series, made in 316 stainless steel with 1/4" CPI™ compression tube ends and PTFE seats. Parker offers the B Series for fast on-off control of fluids in process and instrumentation work, with a free-floating micro-finished ball, a straight-through flow path and bi-directional sealing. The Parker 4Z-B6LJ-SSP has a 4.7 mm (0.187 in) orifice and is the B6 body of the range.
Seven Star LLC supplies Parker 4Z-B6LJ-SSP in Oman and the GCC. This page decodes the number, gives the flow and pressure data published by Parker and explains selection and maintenance, including the difference between PTFE and PCTFE seat versions.
Decoding the 4Z-B6LJ-SSP part number
B Series ordering numbers combine port codes, valve series, seat material, seal material and body material. For the 4Z-B6LJ-SSP the elements are as follows.
| Code | Meaning for 4Z-B6LJ-SSP |
|---|---|
| 4Z | Port 1 and port 2: 1/4" CPI™ compression tube end on both sides |
| B6L | Valve series: B6 two-way ball valve (L = two-way, X would be the three-way diverter pattern) |
| J | Seat material: PTFE (J = PTFE, J2 = PCTFE; PEEK and spring-loaded options exist in other numbers) |
| (blank) | Seal material: PTFE stem seal and end seals as standard; V, EPR, BN, KZ or live-loaded LT variants change this position |
| SSP | Body material: 316 stainless steel (BP brass, MP Monel® Alloy 400 and HCP Hastelloy® C-276 are the other codes) |
Options are added as suffixes: a pneumatic or electric actuator part number, or -C3 for cleaning and assembly for oxygen service to Parker specification ES8003. None of these is part of the base number 4Z-B6LJ-SSP.
Parker 4Z-B6LJ-SSP technical specifications
| Parameter | Specification |
|---|---|
| Manufacturer / part number | Parker / 4Z-B6LJ-SSP |
| Product family | B Series two-way ball valve (catalogue 4121-BV) |
| Body material | 316 stainless steel (ASTM A 351 grade CF3M) |
| Ball / stem | 316 stainless steel ball, ASTM A 276 type 316 stem |
| Seats | PTFE, encapsulated |
| Port connections | 1/4" CPI compression, both ports |
| Orifice | 0.187 in (4.7 mm) |
| Cv / xT (ISA S75.02) | 1.04 / 0.42 |
| Pressure rating | 1500 psig (103 bar) with PTFE seats |
| Temperature (seat material) | -65°F to 350°F (-54°C to 177°C) for PTFE |
| Dimension A and B (nuts finger tight) | 1.74 in (44.2 mm) each |
| Operation | 90° quarter turn, positive handle stops, handle shows flow direction |
| Stem seal | Adjustable PTFE seal, maintainable in line |
| Mounting | Panel mountable, panel nut supplied with the valve |
Data are from Parker catalogue 4121-BV for the two-way B Series and the Parker product page for 4Z-B6LJ-SSP. Flow data are tested in accordance with ISA S75.02 and gas flow becomes choked when the pressure drop divided by the inlet pressure equals xT. The catalogue notes that the B6 series carries a 6000 psig rating or 4400 psig (303 bar) CWP. Dimensions are for reference only.
How the 4Z-B6LJ-SSP works
Turning the handle through 90 degrees rotates a micro-finished 316 stainless steel ball between two seats. With the handle in line with the body the bore is open; across the body the ball closes against the downstream seat. Because the ball floats, line pressure pushes it onto the seat and compensates for seat wear, and the valve seals in either flow direction. The straight bore gives a low pressure drop for a valve this size, Cv 1.04 for the 4Z-B6LJ-SSP.
This is the entry combination for 1/4" single-ferrule CPI™ tube in the B6 body: PTFE seats keep torque low and sealing positive on clean gases and liquids, but they also set the lower pressure limit of the valve.
Where the 4Z-B6LJ-SSP fits in the system
Ball valves in the B Series are used as isolation, vent, drain and sample shut-offs in stainless steel instrument tubing and small process lines. Compared with a needle valve such as the V Series, a ball valve is quicker to operate and shows its position at a glance, but it is not meant for fine regulation. The 4Z-B6LJ-SSP is normally fitted next to the root of an instrument tubing run, ahead of a manifold or on a vent and drain branch.
Within the same family the numbers 4Z-B6LJ2-SSP, 4A-B6LJ2-SSP, 6Z-B6LJ-SSP, 8A-B8LJ-SSP, 4A-B2LJ-SSP differ in body size, port connection and seat material. For tubing connections Parker A-LOK® and CPI™ fittings such as 4MSC4N-316 or 4SC4-316 match the tube ends, and V Series needle valves such as 4A-V4LN-SS complement the ball valve where regulation is required.
Selection checklist for the 4Z-B6LJ-SSP
- Tube size and connection: 1/4" CPI on both ports for the 4Z-B6LJ-SSP; confirm the tubing material and wall thickness against the working pressure tables.
- Pressure: the stainless body is rated for the full catalogue pressure, but PTFE seats limit the valve to 1500 psig (103 bar); this valve has PTFE seats.
- Temperature: PTFE seats are rated -65°F to 350°F (-54°C to 177°C); elastomer seals and live-loaded packing change the range.
- Flow: Cv 1.04 and an orifice of 4.7 mm should be checked against the line flow and allowed pressure drop.
- Operation: manual lever handle as standard; pneumatic and electric actuators are listed by Parker and are added as a suffix in the part number.
- Service: state oxygen cleaning, a lock-out device (LD plus the series, for example LD-B6L) or coloured handle in the enquiry.
Installation and maintenance of the 4Z-B6LJ-SSP
- Cut the tube square, deburr it and insert it fully into the tube end before tightening the nut to the manufacturer assembly procedure.
- Mount the valve so the handle swing is not obstructed; if panel mounting, use the panel nut supplied with each valve.
- Operate the handle fully open and fully closed against its stops during pressure testing; the handle shows flow direction.
- If the stem seal weeps, tighten the packing nut slightly; the adjustable PTFE stem seal can be adjusted without removing the valve from the line.
- For a rebuild Parker lists seal kits built from the series, seat and body codes, for this valve in the form KIT-B6LJ-SS, which contains a PTFE stem seal, washers, seats and end connector seals.
- Record 4Z-B6LJ-SSP and the installation date so that handles, lock-out devices and kits can be matched later.
Typical applications in Oman and the GCC
Stainless steel instrument ball valves like the 4Z-B6LJ-SSP are used on oil and gas wellsites, compressor and pump skids, power station sampling, chemical injection panels, desalination plants and petrochemical units across Oman and the GCC. The 316 stainless steel body resists chlorides in coastal air and brine, which matters on the Gulf coast, while the quarter-turn handle with positive stops is quick to operate with gloved hands in desert heat. PTFE and PCTFE seats keep their shape across a wide temperature span, though high ambient temperatures in direct sun should be kept in mind when sizing seat materials.
Typical roles are root and block isolation of transmitters, sample point isolation, vent and drain valves, and shut-off in hydraulic or chemical injection tubing. Because the 4Z-B6LJ-SSP has a straight-through flow path, it is also used where a needle valve would give too much restriction.
B Series variants compared with the 4Z-B6LJ-SSP
| Part number | Body | Tube ends | Seat | Orifice (mm) | Cv |
|---|---|---|---|---|---|
| 4Z-B6LJ-SSP | B6 | 1/4" CPI™ | PTFE | 4.7 | 1.04 |
| 4Z-B6LJ2-SSP | B6 | 1/4" CPI™ | PCTFE | 4.7 | 1.04 |
| 4A-B6LJ2-SSP | B6 | 1/4" A-LOK® | PCTFE | 4.7 | 1.04 |
| 6Z-B6LJ-SSP | B6 | 3/8" CPI™ | PTFE | 6.4 | 2.34 |
| 8A-B8LJ-SSP | B8 | 1/2" A-LOK® | PTFE | 10.3 | 6.42 |
| 4A-B2LJ-SSP | B2 | 1/4" A-LOK® | PTFE | 4.2 | 0.93 |
Use the table to compare capacity and connection style before you confirm the order of 4Z-B6LJ-SSP or one of its alternatives.
Information to send with an RFQ for 4Z-B6LJ-SSP
- Full part number 4Z-B6LJ-SSP and quantity.
- Tubing outside diameter, material and wall thickness.
- Fluid, operating pressure and temperature range.
- Required handle colour, lock-out device, oxygen cleaning or actuator, if any.
- Project and delivery location in Oman or the GCC.
Documents and quotation
The official Parker Instrumentation Products Division catalog 4121-BV (January 2019, English) is attached on this page as a PDF and covers the B Series ball valve used for the Parker 4Z-B6LJ-SSP. It sets out the B Series pressure-temperature curves up to 6,000 psi, the seat materials, the two-way and three-way flow patterns, the end connections, the handle and actuator options and the ordering code that decodes this part number. Confirm the flow pattern, the seat material and the end connection for your service, then send us the quantity and the delivery location for a quotation.
Seven Star LLC supplies 4Z-B6LJ-SSP in Oman and the GCC, together with matching fittings, tubing and manifolds. Send your RFQ with the details above.
Datasheets & Documents
- Datasheet Parker Ball and Plug Valves Catalog 4121-BV (PDF) Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
Parker Hannifin is an American manufacturer of motion and control technologies, founded in 1917 in Cleveland, Ohio, by Arthur L. Parker as the Parker Appliance Company. Its first product was a pneumatic brake system for trucks and buses. In 1957 the company bought Hannifin, a maker of hydraulic and pneumatic cylinders and valves, and took the Parker Hannifin name. It is headquartered in the Cleveland area and listed on the New York Stock Exchange.
Seven Star LLC supplies the Parker items that maintenance teams request most: Lucifer solenoid valves, including NAMUR types for actuated valves, along with filter elements and hydraulic gear pumps.
Parker company profile
| Founded | 1917, Cleveland, Ohio, USA, by Arthur L. Parker |
|---|---|
| Headquarters | Cleveland area, Ohio, USA |
| Ownership | Public company, New York Stock Exchange (PH), listed since 1964 |
| First product | Pneumatic brake system for trucks and buses |
| Product families | Hydraulic pumps, cylinders and valves, pneumatic valves and FRLs, instrumentation fittings and valves, hoses and couplings, filtration (including Racor and Velcon), seals and O-rings |
Milestones
- 1917: Arthur L. Parker starts the Parker Appliance Company in Cleveland.
- 1924: Parker restarts the business after a 1919 accident destroyed its inventory.
- 1957: Parker acquires Hannifin and becomes Parker Hannifin.
- 1964: The shares are listed on the New York Stock Exchange.
Parker product lines listed here
Most of the listing is Lucifer, the Parker solenoid valve line that many nameplates still show as a brand in its own right. The 341N types (341N01, 341N22, 341N31) are NAMUR-interface valves that bolt straight onto a pneumatic actuator to pilot it. The E131K03 is a direct-acting 3/2 valve, and the 322K4706 and 7341NAKBHNM0 are further Lucifer solenoid valves. Parker sells Lucifer valve bodies and their coils or electrical parts as separate items, so one body can be combined with different voltages and enclosure types.
Other Parker lines appear: a hydraulic gear pump (P51A478BEY25-07-ZY), a coalescing filter element (9000040001) and a Triple-Lok 37-degree flare tube fitting.
Where Parker components are used
Lucifer NAMUR valves sit on quarter-turn actuators for on-off and shutdown valves in oil and gas, power and water plants across the GCC. Line-mounted solenoid valves switch instrument air, water, steam and light oils on skids and machines. Gear pumps drive hydraulic power units and mobile equipment, and coalescing elements protect instrument air and gas sampling systems from oil and water aerosols.
Parker products we list
Ordering Parker parts: what we need
Parker part numbers are long and every character counts. Please send:
- Solenoid valves: valve number from the body, coil or electrical part number, voltage and frequency, and the Ex marking if the coil is certified
- Gear pumps: the complete code from the nameplate, including the assembly number, which fixes displacement, shaft, ports and rotation
- Filter elements: element number and the housing model it fits
A photo of the nameplate is welcome. We check the code against Parker documentation and identify the manufacturer's current equivalent if a number has been superseded.
Facts checked against Parker's centennial timeline and the Encyclopedia of Cleveland History, October 2026.
Browse Parker products by category: Solenoid Valve, Filtration Elements, Pumps.
FAQ
Questions about the Parker 4Z-B6LJ-SSP B Series Ball Valve 1/4″ CPI
Answers from our engineering team on installation, compatibility and integration.
01What does 4Z-B6LJ-SSP mean?
The code gives 1/4" CPI tube ends on both ports, the B6 two-way ball valve body, PTFE seats (J) and a 316 stainless steel body (SSP). The decoding table above explains each element.
02What pressure rating does the 4Z-B6LJ-SSP have?
The B Series stainless steel body is catalogued at 6000 psig (414 bar). With PTFE seats the catalogue limit is 1500 psig (103 bar). Tube connection ratings and the tubing itself can limit the system pressure further.
03What is the Cv of the 4Z-B6LJ-SSP?
Parker lists a Cv of 1.04 with an xT of 0.42 and an orifice of 4.7 mm (0.187 in), tested in accordance with ISA S75.02.
04Can the 4Z-B6LJ-SSP be repaired in line?
The adjustable PTFE stem seal can be tightened without removing the valve from the line. Parker also lists seal kits by series, seat and body, in the form KIT-B6LJ-SS for this valve.
05Which seat material does the 4Z-B6LJ-SSP use?
The J in the number means PTFE seats. PTFE gives low torque but sets the 1500 psig limit.


















Reviews
There are no reviews yet.