OMD-501X Oxygen Analyzer

Overview

The SSO2 OMD-501X oxygen analyzer is a 1/4 DIN panel mount unit for fast, reliable, and continuous oxygen sensing and O2 deficiency monitoring. It combines a rugged in-line design with SSO2’s precision oxygen sensors, delivering a highly reliable and cost-effective compact instrument with an easy-to-use user interface.

Trace ranges include 0-10 ppm, 0-100 ppm, 0-1000 ppm, 0-10000 ppm, and 0-25%, covering both trace and percent oxygen measurement applications in a single instrument.

Engineering & Design

The 1/4 DIN panel format allows standard panel cut-out installation in analyser racks and control panels, while the in-line sensor design provides direct connection to the sample stream. The precision oxygen sensors deliver stable readings across the full trace-to-percent range.

The user interface is designed for straightforward operation, with the instrument providing continuous oxygen measurement suitable for process monitoring, safety applications, and O2 deficiency detection in enclosed or ventilated areas.

Key Features

• 1/4 DIN panel mount oxygen analyzer
• Trace ranges 0-10, 0-100, 0-1000, 0-10000 ppm
• Percent range 0-25% O2
• Rugged in-line sensor design
• Precision SSO2 oxygen sensors
• Continuous O2 sensing
• O2 deficiency monitoring
• Easy-to-use user interface
• Cost-effective compact design

Applications

• Process oxygen monitoring
• O2 deficiency detection
• Inert gas blanketing verification
• Analyser panel installation
• Industrial safety monitoring

Specifications

Oxygen measurement spans trace and percent ranges, and the OMD-501X oxygen analyzer covers both, which is why Seven Star LLC supplies the OMD-501X oxygen analyzer for process and safety monitoring.

The OMD-501X oxygen analyzer measures the oxygen content of the flue gas with the zirconia sensor and the heated probe. The analyzer is installed on the boiler duct and the sensor element is inserted into the gas stream with the probe flange. The transmitter displays the reading and provides the 4-20 mA output for the combustion control of the plant, and the calibration is made with the reference gas.

The OMD-501X analyzer is used with the ceramic filter of the probe and the sample flow is controlled by the ejector of the system. The calibration sequence is initiated from the transmitter and the readings are corrected for the reference gas values. The analyzer provides the self-diagnostic message for the sensor failure and the probe temperature. The replacement sensor is inserted at the probe tip without the removal of the probe from the duct.

The OMD-501X provides the automatic calibration with the zero and the span gases, and the calibration history is stored in the transmitter memory. The analyzer is used for the combustion control and the efficiency measurement of the boilers and the furnaces. The switching output signals the maintenance request of the sensor and the probe.

The analyzer is supplied with the commissioning kit of the probe and the calibration gases, and the initial reading is verified against the reference instrument before the handover to the operator.

Why Seven Star LLC

Seven Star LLC supplies the SSO2 OMD-501X oxygen analyzer for gas analysis projects across the Gulf, with verified specifications and technical support. Our team assists with range selection and installation planning for your application.

We support process, safety, and industrial customers with reliable B2B supply of gas analysis instrumentation throughout the GCC.

Measurement Performance

The multiple trace ranges from 0-10 ppm to 0-10000 ppm, together with the 0-25% range, make the OMD-501X suitable for everything from blanketing gas verification to ambient O2 deficiency monitoring. The rugged in-line sensor design connects directly to the sample stream.

The 1/4 DIN panel format is a standard industry size, simplifying installation in analyser racks and control panels, and the straightforward user interface keeps operator training to a minimum.

Selecting the Measurement Range

The first decision is whether the application is trace or percent oxygen. Inert gas purity, nitrogen generator output and glovebox atmospheres normally need a ppm range, while ambient O2 deficiency monitoring and combustion-related checks work on the 0-25% range. Choose the lowest range that still covers normal operation and expected upsets, and confirm the sample composition with the supplier so that the sensor type suits gases that might be present, such as acid gases or hydrocarbons.

Installation and Commissioning

Fit the instrument into a standard 1/4 DIN cut-out and route the sample to the in-line sensor through clean, leak-tight tubing. For trace measurements, stainless steel lines and good fittings are essential, because even a small leak lets air diffuse in and raises the reading. Set a stable sample flow and pressure within the manufacturer’s limits. At start-up, allow the sensor to purge down after exposure to air; this can take some time on the lowest ranges. Calibrate using a certified span gas and a zero gas where the procedure calls for it, then test any alarm outputs connected to the control or safety system.

Maintenance and Troubleshooting

• A reading that never falls to expected trace levels usually indicates a sample leak or air ingress at fittings.
• A slow or sluggish response can indicate an ageing sensor or excessive dead volume in the sample line.
• Periodic span checks confirm sensor health; replace the sensor when it can no longer be spanned correctly.

Record calibration dates and results so that sensor replacement can be planned rather than forced by a failure.

Applications in Oman and the GCC

Across the region, the OMD-501X oxygen analyzer is a good fit for nitrogen blanketing of storage tanks, purity checks on nitrogen generators, oxygen deficiency monitoring in analyser houses and enclosed plant rooms, and inert gas verification in food packaging and laboratories.

Sourcing from Seven Star LLC

Seven Star LLC supplies oxygen analyzers, replacement sensors and calibration accessories to industrial clients in Oman and the GCC. Share your gas composition, range and sample conditions and we will confirm the suitable model and options.

Request a Quote for OMD-501X Oxygen Analyzer

For the OMD-501X oxygen analyzer, SSO2 OMD-501X O2 analyzer or any related control and instrumentation requirement, contact the Seven Star LLC team. Submit a formal inquiry through our RFQ page with your measurement range, connection and configuration, and our specialists will respond with a detailed commercial proposal and the official OMD-501X documentation.

Related Products

• AMETEK 5100P Transportable TDLAS-based analyzer
• ABB Endura AZ40 Oxygen and Carbon Monoxide Analyzer
• GasMicro NG™ Electronic Volume Corrector
• Servomex SERVOPRO 4900 Multigas Analyzer
• Servomex SERVOTOUGH OxyExact 2200 Oxygen Analyzer
• ABB Uvisor SF810 Safe Flame Scanner