Brand:

Moog 072-1201-6 Servo Valve, 95 l/min, ISO 10372 Size 06

Description

Moog 072-1201-6 servo valve overview

The Moog 072-1201-6 is a preferred model of the 72 Series, the larger of the two-stage flow control servo valves with an analog interface from this maker, covering rated flows of 95 to 225 l/min at a 35 bar drop per spool land. The 072-1201-6 is the 95 l/min (25 gpm) version with a steel body, 350 bar (5,000 psi), and its type designation is S09KOFM4VBLN. It is a throttle valve for four-way service in electrohydraulic position, speed, pressure and force loops that demand strong dynamics at high flow.

The output stage of the 072-1201-6 is a closed-centre four-way sliding spool and the pilot stage is a symmetrical double nozzle and flapper driven by a double air gap, dry torque motor. A cantilever spring supplies mechanical feedback of spool position. The catalog describes the design as simple and rugged for long operating life, and the valve complies with the SAE ARP 490 valve design standard.

The code S09KOFM4VBLN breaks down as follows: S is standard response, 09 is the flow code, K is the body and pressure code, O is the axis-cut linear spool, F is the standard-dynamics pilot, M is center position, 4 is internal pilot connection, V is the FKM 90 Shore seal, B places the connector over the B side, L is the plus or minus 20 mA series coil code and N adds magnetic null adjustment. The catalog table prints the model as -072-1201-6, with the leading dash marking the standard series specification.

Key features of the Moog 072-1201-6

  • Hardened 440C bushing and spool for wear resistance and low sliding friction, a feature the maker lists for the 72 Series.
  • Carbide ball-in-hole feedback mechanism, which the maker says extends valve life compared with slotted spool and sapphire ball designs.
  • Dual coil dry torque motor and dual precision nozzles for redundancy and predictable flow control.
  • Field-replaceable pilot stage filter and external null bias adjustment for maintenance in the field.
  • Standard field-configurable fifth port for a separate pilot supply when working pressure is low.
  • Rated flow of 95 l/min with a step response of 11 ms for the 0 to 100 percent stroke.
  • Port pattern per ISO 10372, so mounting manifolds are readily available.

072-1201-6 technical specifications

Part number (model) 072-1201-6 (printed as -072-1201-6 in the catalog table)
Type designation S09KOFM4VBLN
Series Moog 72 Series flow control servo valve
Valve design Two-stage, spool and bushing, dry torque motor, mechanical feedback
Pilot stage Nozzle flapper, standard dynamics
Rated flow at 35 bar per spool land 95 l/min (25 gpm)
Maximum flow 355 l/min (93.8 gpm), series limit
Body and pressure rating Steel body, 350 bar (5,000 psi) at ports P, X, A and B
Return port T Static: same as P port; normal operating 70 bar (1,000 psi)
Minimum operating pressure 14 bar (200 psi)
Spool design 4-way, axis cut, linear
Pilot connection Internal supply and internal return, 17 to 210 bar
Spool position without signal Center position
Seal material FKM, 90 Shore
Rated current Plus or minus 40 mA single or parallel coil (20 mA series), 80 ohm per coil at 25 degC
Null adjustment Magnetic null adjustment (option N)
Connector Connector over the B side (LH)
Mounting pattern ISO 10372-06-05-0-92
Step response 0 to 100 percent 11 ms
Typical leakage 3.50 l/min (0.92 gpm)
Maximum total leakage, axis cut 5.82 l/min (1.54 gpm)
Pilot flow 0.80 l/min (0.21 gpm)
Null adjust authority Greater than 10 percent of rated flow
Weight 7.26 kg (16.0 lb)
Ambient temperature Minus 29 to plus 135 degC
Vibration and shock 30 g, 3 axes

Data for the 072-1201-6 come from the maker’s 72 Series catalog and were measured at 210 bar pilot or operating pressure, 32 mm2/s oil viscosity and 40 degC oil temperature. Both leakage figures apply to the axis-cut spool.

Typical applications in oil and gas, utilities, water and manufacturing

A high-flow servo valve like the 072-1201-6 controls large hydraulic cylinders and motors. Relevant uses in Oman and the GCC include hydraulic drives on heavy forming and rolling equipment, hydraulic actuation of steam and gas turbine control systems in power and process plants, large test and fatigue rigs, and hydraulic gate or valve actuators fed from a central power unit in utilities and water works.

The 95 l/min rating places the 072-1201-6 in the larger end of the analog servo range, so it is generally installed on an ISO size 06 manifold close to a big actuator. Buyers who search for the exact part number 072-1201-6 are normally replacing a valve listed on a machine nameplate, where a different model would change loop gain and require re-commissioning.

Selection and compatibility notes for 072-1201-6

Choose between the aluminium and the steel version first. The 072-1201-6 has a steel body, 350 bar (5,000 psi); the catalog lists 210 bar for aluminium and 350 bar for steel, while a filterless steel body for 490 bar is a separate configuration. Port T static pressure follows P, but the normal operating pressure at T is 70 bar.

Then confirm flow and speed. The 072-1201-6 is rated 95 l/min at 35 bar per land and its series maximum flow is 355 l/min; calculate the flow at your own pressure drop with the catalog formula. Response varies with size, and the step response of the 072-1201-6 is 11 ms.

Check the coil and connector too: the 072-1201-6 uses a 40 mA single-coil rating and a connector over the B side. If your amplifier drives a different current or the connector must be on the opposite side, state it in the RFQ. The 72K intrinsically safe series is a different model and certificates should not be assumed for the 072-1201-6.

Installation and commissioning of the 072-1201-6

Mount the 072-1201-6 in any position, using a manifold to ISO 10372-06-05-0-92 and clean o-rings. With a weight of 7.26 kg (16.0 lb), support the manifold properly and tighten the screws evenly. Flush the hydraulic system and fit a pressure filter without bypass before the valve sees oil.

Connect the coils in single, series or parallel mode according to the amplifier output, observing the polarity for the flow direction shown in the catalog. Use a current-feedback amplifier, set the null with the magnetic null adjustment or from the controller and check that the actuator does not creep with a zero command.

Maintenance and fluid cleanliness

For the 072-1201-6 the catalog recommends ISO 4406 cleanliness of 17/14/11 for functional safety and 15/13/10 for longer service life, with beta 10 at 75 or better filtration. Low-pressure return filtering at beta 5 helps reduce silting of the pilot stage.

The listed spare is maintenance kit B52555RK099K001 with base o-rings in FKM per AMS7259; additional o-rings, a filter tube and a field-replaceable filter are needed for filter access. Change the filter regularly and log the null.

Related products and ordering notes for 072-1201-6

The same 72 Series preferred models are 072-1201 (95 l/min), 072-1202 (150 l/min) and 072-1203 (225 l/min) with aluminium bodies, and 072-1201-6, 072-1202-6 and 072-1203-6 with steel bodies. A buffer amplifier such as IN123-825-001 and a valve checker are common companions.

With your request for the 072-1201-6, give the quantity, delivery location and the nameplate of the existing valve. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer; the Moog name and the part number are used only to identify the product being quoted.

Moog 072-1201-6 vs Other Moog Servo Valve l/min ISO 10372 Variants

Pick this variant when 072-1201-6 95 is what your sizing calculation or the installed nameplate calls for. Neighbouring variants in the same family share the mounting concept and most accessories, so the difference that matters on site is exactly that rating.

Variant Distinguishing detail
Moog 072-1201-6 Servo Valve, 95 l/min, ISO 10372 Size 06 (this page) 072-1201-6 95
Moog 072-1202-6 Servo Valve, 150 l/min, ISO 10372 Size 06 072-1202-6 150
Moog 072-1203-6 Servo Valve, 225 l/min, ISO 10372 Size 06 072-1203-6 225

Frequently asked questions in short

The 072-1201-6 is a 95 l/min ISO size 06 servo valve with a steel body, 350 bar (5,000 psi). It uses a plus or minus 40 mA coil, a connector over the B side, FKM seals and magnetic null adjustment. The questions below explain the number, the body difference and the spare kit.

Documents and quotation

The manufacturer’s 72 Series datasheet is attached so that the 072-1201-6 data can be verified. Send your RFQ with the part number 072-1201-6 and the quantity, and Seven Star LLC will reply with availability and lead time for Oman and the GCC.

Other Models in the 72 Range

Seven Star LLC supplies models from the 72 range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
Moog 072-1201 Servo Valve, 95 l/min, ISO 10372 Size 06Solenoid ValvesView details
Moog 072-1202 Servo Valve, 150 l/min, ISO 10372 Size 06Solenoid ValvesView details
Moog 072-1203 Servo Valve, 225 l/min, ISO 10372 Size 06Solenoid ValvesView details
Moog 072-1201-6 Servo Valve, 95 l/min, ISO 10372 Size 06Solenoid ValvesYou are viewing this model
Datasheets & Documents
  • PDF Datasheet Moog 072-1201-6 Servo Valve Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Moog is an American maker of precision motion control products, founded in July 1951 in East Aurora, New York, by Bill Moog, his brother Art Moog and Lou Geyer. Its first product was Bill Moog's electrohydraulic servo valve, which turns small electrical signals into fast, accurate hydraulic movement. Moog is still headquartered in East Aurora and is listed on the New York Stock Exchange.

Seven Star LLC lists Moog servo valves, proportional valves and an explosion-proof brushless servo motor, and sources them by model and type number for plants in Oman.

MOOG company profile

Founded July 1951, East Aurora, New York, as Moog Valve Company
Founders Bill Moog, Art Moog and Lou Geyer
Headquarters East Aurora, New York, USA
Ownership Public company, New York Stock Exchange
Product families Electrohydraulic servo and proportional valves, servo motors and drives, electromechanical actuators, test and simulation systems

Milestones

  • 1951: The Moog Valve Company starts in a corner of an airport hangar in East Aurora.
  • 1953: The US patent for Bill Moog's electrohydraulic servo valve is issued.
  • 1959: The company goes public as Moog Servocontrols Inc.

Moog servo valves and motors listed

The Moog products on this page are:

  • G761 series: two-stage flow control servo valve with mechanical feedback
  • 79 series, including D791 and D792: pilot-operated servo valves for high flow rates
  • Servo valves and servo-proportional valves for hydraulic control in general
  • G-3LM6-048-00-00-01: an explosion-proof brushless servo motor, listed here under the G400K series

Within one series, valves differ in rated flow, spool lap, coil rating, seal material and pilot arrangement. Two G761 valves with different type numbers are therefore not interchangeable without checking.

Where Moog servo valves are used

Moog servo valves control steam and gas turbine fuel and steam actuators, compressor anti-surge and guide vane actuators, steel mill gauge control, injection molding and presses, and materials test machines. In GCC power stations and gas plants the usual request is a like-for-like valve for a turbine control actuator specified by the turbine builder.

MOOG products we list

Family Examples
Hydraulic Valves & Components 72 Series Two-Stage Flow Control Servo V…, 79 Series Flow Control Servo Valve, D634 Direct Drive Servo Valve, D638 Digital p/Q Control Servo Valve, D661 Pilot-Operated Servo Valve, D671 to D675 Pilot-Operated Servo-Propor…, D791 Pilot-Operated Servo Valve, D792 High-Flow Servo Valve and 5 more
Electric Motors G-3LM6-048-00-00-01 Brushless Servo Motor

Ordering Moog parts: what we need

The nameplate on a Moog servo valve shows the model, a type designation and a serial number. Please send all three, or a clear photo. The type designation fixes rated flow, maximum operating pressure, signal and coil data, seals and connector, and is the only safe basis for quoting. If the valve was supplied through a machine builder, also give the builder's own part number. State the hydraulic fluid, especially if it is a fire-resistant phosphate ester, since that decides the seal material. For Moog servo motors, send the full model string, as in the G400K example above, and the drive it runs with.

Frequently requested MOOG models: Moog Servo Valves and Proportional Valves.

Facts checked against published Moog company histories, October 2026.

FAQ

Questions about the Moog 072-1201-6 Servo Valve, 95 l/min, ISO 10372

Answers from our engineering team on installation, compatibility and integration.

01Why does the catalog show 072-1201-6 with a leading dash?
In the catalog table the model number is printed as -072-1201-6. The leading dash is the series specification position, left blank for the standard series, so the model is quoted here as 072-1201-6.
02What is the rated flow of the 072-1201-6?
The catalog gives 95 l/min (25 gpm) at 35 bar per spool land. Step response is 11 ms and typical leakage is 3.50 l/min (0.92 gpm).
03What is the difference between 072-1201-6 and the other 72 Series bodies?
The 072-1201-6 has a steel body, 350 bar (5,000 psi). The catalog lists 072-1201, 1202 and 1203 as aluminium versions and the versions ending in -6 as steel versions, with type letter F or K in the third position.
04Which maintenance kit is listed for the 072-1201-6?
The catalog lists B52555RK099K001 with base o-rings in FKM per AMS7259. The kit does not include every o-ring needed for filter access.
05How do I request a quotation for the 072-1201-6?
Send an RFQ with 072-1201-6, the quantity and the delivery location. Seven Star LLC replies with availability and lead time.