Brand:

ifm UGT510 Ultrasonic Sensor M18, 150-1600 mm, IO-Link, 4-20 mA

Description

ifm UGT510 Ultrasonic Sensor M18, 150-1600 mm, IO-Link, 4-20 mA

The ifm UGT510 is an ultrasonic sensor with an M18 x 1 thread and a 97.5 mm body. It senses objects between 150 and 1600 mm (target 200 x 200 mm) independent of colour, transparency or surface, and offers both a switching output and a scaled 4 to 20 mA analogue output, with IO-Link available. The beam angle is a cylindrical 15 degrees with a blind zone of 150 mm.

The switching output is PNP at 100 mA, the repeatability is 1 percent and the supply is 10 to 30 V DC at 55 mA. Protection is IP67 for -20 to 70 degrees Celsius. Seven Star LLC supplies the UGT510 in Oman and the GCC as an independent supplier in Muscat.

UGT510 technical specifications

The table lists the values published by the manufacturer for the UGT510. Where a parameter has several operating modes, the headline value is shown; the full parameter list is in the manufacturer documentation.

Parameter Specification
Manufacturer / part number ifm electronic / UGT510
Sensing range [mm] 150 to 1600 (Target: 200 x 200 mm)
Thread designation M18 x 1
Dimensions [mm] M18 x 1 / L = 97.5
Blind zone [mm] 150
Angle of aperture cylindrical [°] 15 (±2)
Operating voltage [V] 10 to 30 DC ("supply class 2" to cULus)
Current consumption [mA] 55
Output signal switching signal; analogue signal; IO-Link
Electrical design PNP
Output function normally open / normally closed (parameterisable)
Permanent current rating of switching output DC [mA] 100
Switching frequency DC [Hz] 3
Analogue current output [mA] 4 to 20
Max. load [Ω] 500
Repeatability 1 %
Response time [ms] < 300 (analogue output)
Communication interface IO-Link
Ambient temperature [°C] -20 to 70
Protection IP 67
Weight [g] 102
Materials stainless steel (316L/1.4404); PA; epoxy glass ceramics
Connector 1 x M12; coding: A; Contacts: 4
MTTF [years] 125

How the UGT510 works

The UGT510 measures distance by sending out short bursts of ultrasound and timing the echo that returns from the target. The sensor ignores colour, transparency and surface finish, and only the shape and size of the target and its angle matter. A built-in temperature compensation corrects for the change in sound speed with air temperature, and the output function is adjusted through a programming wire.

Where the UGT510 fits and related parts

The UGT510 is the long-range version of the family in our range; the UGT500 covers shorter ranges. For high-precision distance on diffuse targets, the O6H700 optical type is an alternative.

Selection and ordering checklist for the UGT510

Work through the points below before you confirm the order, so that the UGT510 you receive is the one your machine or plant needs.

  • Confirm that the 150 mm blind zone is acceptable
  • Confirm the distance up to 1600 mm and the target size
  • Choose switching or 4 to 20 mA output, with a load below 500 ohm
  • Decide on pushbutton or IO-Link set-up
  • Check ambient range -20 to 70 degrees Celsius

The manufacturer lists this article under the type designation Ultrasonic sensor, UGA01600E1KG/IO-LINK/US. The article number UGT510 is the reference to quote when ordering, and the type designation is useful for technicians who compare the label on an installed unit.

Installation, commissioning and maintenance

Mount the sensor perpendicular to the target surface, within the stated angle tolerance, and keep the sound cone clear of fixtures and pipe walls. Respect the blind zone: targets inside it are not detected reliably. Tighten the lock nuts to the stated torque and let the sensor warm up before judging the accuracy. During commissioning adjust the sensor function via the programming wire on the real product, check it with the target at both extremes of its movement, and look out for sound reflection from nearby walls or other ultrasonic sensors, which can disturb the measurement.

Typical applications in Oman and the GCC

Level of bulk material in bins, roll diameter, stack height and presence of transparent objects. In Oman and the GCC it measures dusty or glossy targets where optical sensors struggle.

In dusty plants and open yards the stainless housing and a sealed connector help, but strong air movement and steam can disturb sound-based measurement, so keep the sound path short and sheltered.

UGT510 compared with related ifm types

The table places the UGT510 next to neighbouring types in the same application group, so you can see whether a sibling would suit the job better.

Part number Key characteristics Note
UGT510 M18, 150-1600 mm, IO-Link, switching + 4-20 mA This page
UGT500 Ultrasonic sensor, shorter range Related type

Information to send with an RFQ for the UGT510

To prepare an accurate offer for the UGT510, please include the following with your enquiry:

  • Required sensing distance and target size
  • Mounting thread and available space
  • Output type and the programming method
  • Environmental conditions: wind, steam, dust, washdown
  • Quantity and delivery location

Storage, handling and spares for the ifm UGT510

Keep ifm UGT510 units in their original packaging until they are mounted. Store them indoors in a dry, dust-free room, away from direct sun and condensation. Panel shops in Oman and the GCC often hold stock in warehouses that get very hot in summer, so check that storage temperature stays within the limits given in the manufacturer datasheet.

  • Check the label and order code on every unit against the drawing before it goes into the panel.
  • Use the correct tool and tightening torque for the terminals, as given in the instructions supplied with the product.
  • Keep a small number of spare units for each rating used on site, so that a failed or damaged part can be replaced without waiting for a new shipment.
  • Record the order code in the panel documentation and the as-built drawings, so that maintenance teams can reorder the same part later.

When you plan spares for a project, group the ifm UGT510 with the other parts of the same panel in one RFQ. This keeps delivery dates aligned and makes it easier to confirm stock for the whole bill of materials at once.

Documents and quotation

The official ifm data sheet for the UGT510 (document UGT510-01, English, issued 13 April 2023) is attached on this page as a PDF. It sets out the electrical data, the output function, the operating conditions, the approvals and the dimension drawing for this article. Check these values and the wiring diagram against your application before ordering, then send us the quantity and the delivery location for a quotation.

Seven Star LLC is an independent supplier in Muscat serving Oman and the GCC and is not affiliated with the manufacturer; the name ifm is used only to identify the product. Prices are not shown on the page, so send the part number, the quantity and the delivery location to receive a quotation.

Datasheets & Documents
  • PDF Datasheet ifm UGT510 Data Sheet (PDF) Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

ifm is a German family-owned maker of sensors and automation products, founded in Essen in October 1969 by Robert Buck and Gerd Marhofer. Its first products were inductive proximity sensors sold under the efector name. ifm is still headquartered in Essen, and the founders' sons, Martin Buck and Michael Marhofer, have led it since 2001.

Seven Star LLC lists ifm position, distance and pressure sensors and supplies them by exact article number to plants and machine builders in Oman and the wider Gulf region.

ifm company profile

Founded 1969, Essen, Germany
Founders Robert Buck and Gerd Marhofer
Headquarters Essen, Germany
Ownership Family-owned
Product families Inductive and capacitive proximity sensors, PN pressure sensors, O1D laser distance sensors, flow and level sensors, IO-Link masters

Milestones

  • 1969: ifm is founded in Essen.
  • 2001: The founders' sons take over management.

ifm sensors listed on this page

ifm identifies every device with a short article number, and that number is what we order against. Three are listed here:

  • O1D100: laser distance sensor for position and distance measurement
  • PN7093: pressure sensor with local display
  • NG5021: inductive proximity sensor with NAMUR output

Other ifm inductive sensors, pressure sensors and connection cables can be quoted on request when you send the article number.

ifm products we list

Family Examples
Inductive Proximity Sensors NG5021 Inductive NAMUR Proximity Sensor
Laser Distance, LiDAR & Radar Sensors O1D100 Laser Distance Sensor
Pressure Instrumentation PN7093 Pressure Sensor with Display

Ordering ifm sensors: what we need

Send the six-character article number printed on the housing (two letters and four digits, or similar). If the label is worn, a photo plus the thread size, sensing range, output type and connector style is enough for us to check the part against ifm documentation. For NAMUR sensors, tell us which isolating amplifier is in the loop. Buyers in the GCC who need a successor for a discontinued article can send the old number and we will check the replacement the manufacturer names.

Facts checked against ifm's own 50-year chronicle (ifm.com), October 2026.

FAQ

Questions about the ifm UGT510 Ultrasonic Sensor M18, 150-1600 mm,

Answers from our engineering team on installation, compatibility and integration.

01What range does the ifm UGT510 have?
150 to 1600 mm for a 200 x 200 mm target. This is the value published by the manufacturer for the UGT510; confirm details before ordering.
02What outputs does the UGT510 have?
A switching output, a scalable 4 to 20 mA analogue output and IO-Link.
03What is the beam angle of the UGT510?
15 degrees plus or minus 2, cylindrical. This is the value published by the manufacturer for the UGT510; confirm details before ordering.
04What is the blind zone of the UGT510?
150 mm. This is the value published by the manufacturer for the UGT510; confirm details before ordering.
05What is the repeatability of the UGT510?
1 percent. This is the value published by the manufacturer for the UGT510; confirm details before ordering.