Brand:

Cortem LHL-10P Ex 9 W LED Hand Lamp, 24 V DC

Description

Cortem LHL-10P overview

The Cortem LHL-10P is a 9 W LED hand lamp from the Cortem LHL-…P series, intended for inspection and maintenance in areas with explosive gas or dust. A 72-LED module is sealed in transparent resin inside a V0-rated polycarbonate tube, and the lamp is carried by a non-slip PVC handle or hung by its stainless steel hook. It runs from 24 V DC and is delivered with a 5 m H07RN-F cable.

Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer. Technical statements on this page are summarised from the manufacturer catalogue sheet for the series, and the part number to quote is Cortem LHL-10P.

Key features of LHL-10P

  • 72-LED module sealed in transparent resin
  • Colour temperature of about 5500 K with Ra 80
  • Polycarbonate tube V0 (UL94), resistant to shock and UV
  • Non-slip PVC handle and stainless steel hook
  • Lifetime of more than 50,000 hours and IP66 protection

LHL-10P technical specifications

Parameter Value
Series LHL-…P LED hand lamp
Protection concept Ex e mb IIC T5/T4 Gb; Ex mb IIIC (II 2G / II 2D)
Zones 1, 2, 21, 22
ATEX certificate CEC 13 ATEX 043
Ambient temperature -20 to +50 degrees C (special: up to +60 degrees C)
Ingress protection IP66
Supply voltage 24 V DC
LED source Module with 72 LEDs
Colour rendering index Ra 80
Colour temperature About 5500 K
Lifetime More than 50,000 hours
Cable H07RN-F 2 x 1 mm2, length 5 m
Cable gland UNI01 polyamide
Body Transparent polycarbonate tube, V0 (UL94)
Handle Non-slip PVC grip with stainless steel hook
Power 9 W
Luminous flux 790 lm
Efficacy 87.78 lm/W
Temperature class T5 at +40 and +50 degrees C; T4 at +60 degrees C
Length 475 mm
Weight 1.4 kg
Part number LHL-10P

Values above are taken from the series catalogue. Confirm the marking and temperature class on the certificate for the exact version you order before commissioning LHL-10P.

Typical applications in Oman and the GCC

Typical uses for LHL-10P include vessel and tank inspection, loading and unloading jetties, fuel depots, offshore and onshore plant maintenance and perimeter checks. In oil and gas facilities across Oman and the Gulf, explosion-protected lighting and power connection equipment is needed wherever flammable vapours, gases or combustible dust can collect. The same requirements appear in utilities and power stations with fuel handling, in water and wastewater plants where biogas or chemicals are present, and in manufacturing sites that process solvents, grain or powders.

High ambient temperatures, salt-laden coastal air and sand are common in the region, so check the rated ambient range and ingress protection of LHL-10P against the site conditions and the area classification drawings.

Hazardous area planning considerations

Explosion-protected equipment is chosen after the plant owner has completed an area classification that defines the zone, the gas or dust group and the maximum permitted surface temperature. The equipment must then carry a certificate and marking that cover each of these three points, and the temperature class must stay below the ignition temperature of the substances present. Documentation should be kept with the plant records so inspectors can match every installed item to its certificate.

Environmental factors also matter in Gulf installations. Strong sunlight, high humidity near the coast, windblown sand and washdown with fresh water all affect gaskets, coatings and entries over time. Specifying suitable cable glands, blanking elements and sealing fittings, and tightening them to the instructions, protects the ingress rating and the integrity of the protection concept throughout the service life of the installation.

Spare-parts planning is another practical point. Maintenance teams often keep a small stock of the most exposed parts, such as gaskets, lamps, plugs or companion items, so that a failure can be corrected without waiting for a new order. Quoting the exact code from the manufacturer catalogue avoids mistakes when similar variants differ only by power, voltage, length or current rating.

Selection and compatibility notes for LHL-10P

Pick LHL-10P when you need the 9 W output. The LHL-10P and LHL-20P differ in length, luminous flux and weight, while temperature class and certificate are shared. Check the ambient temperature: the lamp is rated T5 up to +50 degrees C and T4 at +60 degrees C. Request a different cable length when the standard 5 m is not suitable.

Always compare the zone, gas group and temperature class of LHL-10P with the hazardous area classification of the installation, and verify cable entries, glands and accessories separately because they are listed as distinct items by the manufacturer.

Installation and commissioning

Feed the lamp from a 24 V DC supply installed in accordance with the local hazardous area code, through the UNI01 polyamide gland already fitted. Make sure the supply cable cannot be pulled out and that the hook is secure when hanging.

Installation of LHL-10P should follow the local hazardous area installation standard such as EN/IEC 60079-14 and the manufacturer instructions, and should be carried out by qualified personnel. Before energising, check enclosure integrity, earthing and the tightness of all entries.

Maintenance and inspection

Wipe the tube and check for scratches, cracks or loose handle parts at regular intervals. Do not open the sealed LED assembly. Replace the whole lamp if the tube or resin seal is damaged.

Keep a record of inspections for LHL-10P as part of the plant electrical inspection programme, and never modify a certified enclosure.

Related products and ordering notes

Other codes in the same series are available with different ratings, and related Ex junction boxes, cable glands, plugs and luminaires from the same manufacturer can be quoted together with LHL-10P. When you order, state the exact code, quantity, supply voltage and the area classification so the offer matches the application.

LHL-10P FAQ summary

Buyers most often ask what LHL-10P is, which hazardous areas it suits, whether a datasheet is available, and how to request a quotation. The answers are listed in the FAQ on this page, and the independent supplier status of Seven Star LLC is stated above.

Documents and quotation

The manufacturer catalogue sheet for the series is attached to this page as the datasheet for LHL-10P. To request a quotation, send the RFQ with the part number LHL-10P and the quantity required, together with the delivery location, and we will reply with availability and lead time.

Cortem LHL-10P vs Other Cortem Ex W LED Hand Lamp Variants

Pick this variant when LHL-10P 9 is what your sizing calculation or the installed nameplate calls for. Neighbouring variants in the same family share the mounting concept and most accessories, so the difference that matters on site is exactly that rating.

Variant Distinguishing detail
Cortem LHL-10P Ex 9 W LED Hand Lamp, 24 V DC (this page) LHL-10P 9
Cortem LHL-20P Ex 17 W LED Hand Lamp, 24 V DC LHL-20P 17
Datasheets & Documents
  • PDF Datasheet Cortem LHL-10P Ex 9 W LED Hand Lamp, 24 V DC Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Cortem is the Italian maker of explosion-proof and increased-safety electrical equipment: Ex d and Ex e lighting, enclosures, control stations, plugs and sockets, cable glands and signalling devices. Marco Rossi and Renato Gratton founded the company on 24 February 1968 in Villesse, in the Friuli Venezia Giulia region of north-east Italy. Cortem S.p.A. heads the Cortem Group, which also includes Elfit and the Fondisonzo foundry, and supplies onshore and offshore oil and gas, chemical and industrial plants.

Seven Star LLC is an independent supplier in Muscat. We list Cortem junction boxes, lighting, plugs and sockets and control stations for oil and gas and process projects in Oman and the GCC.

Cortem company profile

Founded 24 February 1968, Villesse (Gorizia), Italy
Founders Marco Rossi and Renato Gratton
Name From the Italian for electromechanical construction and technical representation
Group companies Cortem S.p.A., Elfit and Fondisonzo
Approvals ATEX and IECEx certified explosion-protected equipment
Product families Ex d and Ex e luminaires and LED fittings, emergency and exit lights, obstruction lights, junction and control boxes, control stations, plugs and sockets, cable glands, alarm and signalling devices

Milestones

  • 1968: Marco Rossi and Renato Gratton found Cortem in Villesse on 24 February.
  • 2011: Research and development on LED lighting for hazardous areas begins.
  • 2012: The first Cortem LED fixture series is launched.
  • 2022: The third generation of Cortem LED fixtures is released.

Cortem product series

Enclosures include the EJBX stainless steel Ex d junction boxes, EJBC aluminium Ex d boxes for gas group IIC, the SA and SAG Ex eb aluminium boxes in 18 sizes and the EJBE and EJBXE Ex de control and distribution boards. Control and power connection products include the CMD Ex e fibreglass control stations and the PYN, SPYN and CMBSP07 Ex plugs and sockets from 16 to 125 A.

Lighting covers the SLED-ME and EVL-40 Ex LED floodlights, the Ex nR SLED-MN and EVNL-40 floodlights for zone 2, the LIFEX-M linear fixture, the FLOWEX high bay, the EVML low bay, STREETEX street lighting and the XLFE-LIB and XLFE-MIA obstruction lights for stacks and towers. The GRDE-4200 is an electronic earthing system for road tanker loading bays.

Where Cortem equipment is used

Refineries, gas plants, tank farms and loading terminals, offshore platforms and ships, chemical and pharmaceutical plants and mining. Products are certified to ATEX and IECEx, with other schemes according to model.

Cortem products we list

Family Examples
Automation Accessories CMBSP07 Ex GRP Plugs and Sockets 16 A to 125 A, CMD Ex e Fibreglass Control and Signalling, EJBC Aluminium Ex d Junction Boxes for Gas, EJBE-EJBXE Ex de Control and Distribution, EJBX Stainless Steel Ex d Junction Box IIB+H2, EV Ex d Luminaires for Traditional and LED, EVL-40 Ex LED Floodlight with 40 Degree Beam, EVML Ex LED Low Bay Luminaire and 14 more

Ordering Cortem products: what we need

Send the model code, the zone and gas or dust group, temperature class, ingress protection, the certification scheme required, and for enclosures the size, entries and internal components. For lighting give the wattage, voltage and mounting; for plugs and sockets the current, poles and voltage.

Facts checked against Cortem Group's published company history, October 2026.

FAQ

Questions about the Cortem LHL-10P Ex 9 W LED Hand Lamp, 24 V DC

Answers from our engineering team on installation, compatibility and integration.

01What is Cortem LHL-10P?
LHL-10P is a Cortem 9 W 24 V DC Ex LED hand lamp from the manufacturer catalogue series, designed for use in hazardous areas as stated on its certificate.
02Which hazardous areas is LHL-10P suitable for?
The zones, gas or dust groups and temperature class for LHL-10P are listed in the specification table on this page and on the series certificate, which must be checked before installation.
03Is a datasheet available for LHL-10P?
Yes. The manufacturer catalogue sheet for the series is attached to this page and contains the dimensions, certification data and code table relevant to LHL-10P.
04Does Seven Star LLC manufacture Cortem LHL-10P?
No. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer.
05How do I request a quote for LHL-10P?
Send the RFQ with the part number LHL-10P, the quantity, the area classification and the delivery location, and we will reply with availability and lead time.