- Automation & ControlView all 2,691 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- HMI Displays
- Servo Drives
- Pneumatic Cylinders
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Moore Industries
Moore Industries IPT/4-20MA/3-15PSIG/20PSI/-FA1 -RTB [DIN] I/P
Description
Moore IPT/4-20MA/3-15PSIG/20PSI/-FA1 -RTB [DIN] overview
The Moore IPT/4-20MA/3-15PSIG/20PSI/-FA1 -RTB [DIN] is a DIN-rail current-to-pressure (I/P) transmitter from the Moore Industries IPT-DIN family. It accepts a 4-20 mA input and produces a 3-15 psig pneumatic output from a 20 psi supply, in a compact aluminum housing only 40 mm wide.
In the model string, 4-20MA is the input, 3-15PSIG the output, 20PSI the supply pressure, -FA1 an access designation that sets where the electrical, pneumatic and test connections are located, -RTB the removable terminal block and [DIN] the aluminum housing that snaps onto a mounting rail or a Moore Industries pneumatic header rack.
The IPT is described by the manufacturer as offering infinite resolution and low air consumption, with a front-panel LED that varies in intensity with the pneumatic signal. The IPT/4-20MA/3-15PSIG/20PSI/-FA1 -RTB [DIN] is therefore well suited to control-room and cabinet installations where many I/P converters are mounted side by side.
The part number written as IPT/4-20MA/3-15PSIG/20PSI/-FA1 -RTB [DIN] is the model string given in the manufacturer datasheet as a worked ordering example for the IPT-DIN family, so it describes one complete, orderable configuration rather than a loose product family. Every field of the string (unit, input, output, supply or power, option and housing) can be changed when a different configuration is needed, and the datasheet table lists the allowed choices. If your plant standard differs from this example, send the configuration you need with your RFQ and we will check it against the table.
Key features of the Moore Industries IPT/4-20MA/3-15PSIG/20PSI/-FA1 -RTB [DIN]
- Plug-in connections: mounting block and removable terminal block allow the unit to be taken out of service without tools.
- Vibration-resistant sensor; the unit may be installed in any position but should be calibrated in its final orientation.
- Self-sealing connection in the mounting block and supply headers gives quick release without air loss.
- Red LED that indicates the presence of the electrical input and varies with the pneumatic signal level.
- Optional pneumatic test jack on the front or rear panel to simplify calibration and maintenance.
- Complete RFI protection as a standard feature.
- Intrinsically safe versions available as an option; accessory air filters are offered.
Technical specifications for IPT/4-20MA/3-15PSIG/20PSI/-FA1 -RTB [DIN]
| Parameter | Value |
|---|---|
| Model string | Moore IPT/4-20MA/3-15PSIG/20PSI/-FA1 -RTB [DIN] |
| Input | 4-20 mA into 280 ohms (200 ohms for intrinsically safe versions) |
| Output | 3-15 psig |
| Supply pressure | Instrument air only, filtered and regulated; 20 psig nominal, 30 psig without damage |
| Accuracy | Less than 0.5% of span, including linearity, hysteresis and repeatability (3-27 psig or 10-50 mA: not to exceed 1% of span) |
| Step response | 0.3 seconds into 100 ml (6 cubic inches) at 90% of span |
| Supply pressure effect | Maximum 0.3% per 1.4 psig (0.3% per 0.1 bar) |
| Air capacity | 1.6 SCFM, minimum |
| Air consumption | 0.08 SCFM (0.2 kg/hr) dead-ended |
| Ambient temperature range | -40 to +85 degrees C (-40 to +185 degrees F) |
| Ambient temperature effect | Less than 0.1% per degree C |
| Shock and vibration effect | Less than 0.5% for acceleration up to 10 g and frequency up to 80 Hz |
| Input connections | Screw clamp type, front or rear mounted, 22-14 AWG |
| Output connection | 1/8 inch NPT female |
| Housing | DIN aluminum case, about 40 mm wide, for rail or pneumatic header rack |
| Certifications | CSA general location; optional ATEX intrinsically safe EEx ia IIC T6; SAA options as listed |
The values above come from the manufacturer datasheet for the IPT-DIN family. Specifications can depend on the option and housing chosen, so always read the matching page of the datasheet before you finalise a purchase specification, and keep the full model string on your purchase documents.
Typical applications in Oman and the GCC
Current-to-pressure converters sit between an electronic control system and a pneumatic device. Common uses in the region include:
- Oil and gas wellhead, pipeline and processing sites, where pneumatic control valves and actuators are driven from a DCS or PLC.
- Power and desalination plants, for dampers, steam and water control valves and other pneumatic final elements.
- Water and wastewater facilities, for pneumatic valves on dosing, aeration and distribution lines.
- Manufacturing plants that retrofit electronic control onto older pneumatic actuators and positioners.
Running a two-wire signal cable instead of long runs of instrument tubing reduces installation effort, and the converter can be placed next to the valve or actuator for a short, fast pneumatic connection.
Selection and compatibility notes
The access designation matters when the unit is used with a Moore Industries pneumatic header rack: the datasheet states that -FA7 or -FA8 should be specified for use with the SIR surface-mounted rack and -RA7, -RA8 or -RA9 for the RIR rack-mounted rack. The IPT/4-20MA/3-15PSIG/20PSI/-FA1 -RTB [DIN] uses -FA1, so confirm that this arrangement suits your cabinet layout.
For NEMA 4X water-tight protection and field mounting, the datasheet points to the IPF family instead of the DIN housing.
Check the pneumatic side first. The output range (for example 3-15 psig, 0.2-1 bar or 20-100 kPa) must suit the actuator or positioner, and the supply pressure given in the model string must match the output range, because the datasheet states that the output must match the supply pressure to its right in the ordering table. Reverse-acting ranges such as 15-3 psig are available when the valve logic requires them.
Then check the electrical side: the loop must be able to drive the stated input impedance, and any hazardous-area certification you need must be present in the option field. Mounting style, conduit entry thread (NPT or metric) and whether pipe-mounting hardware is required are set by the housing designator at the end of the model string.
Questions to settle before ordering IPT/4-20MA/3-15PSIG/20PSI/-FA1 -RTB [DIN]:
- What pneumatic output range and supply pressure does the actuator need?
- Is a direct or reverse output required?
- Is a filter/regulator or pressure gauge option required?
- Which conduit thread and mounting arrangement suit the site?
- Which hazardous-area approval is required, if any?
Installation and commissioning
Pneumatic mounting blocks are 35.31 mm wide. The datasheet suggests that a 4.32 mm wide gauge between blocks gives uniform spacing and the shortest rail length when units are installed side by side; mounting rail length should be specified when ordering rail.
Mount the transmitter close to the pneumatic device it serves, supply it with clean, dry, regulated instrument air only, and connect the pneumatic output port to the actuator. The datasheet notes that the unit can be mounted in any position but should be calibrated in its final orientation, so do the zero and span adjustments after the unit is fixed in place.
Wire the two-wire 4-20 mA loop with the correct polarity, seal the conduit entry as required by the area classification, then apply a 4 mA signal and adjust zero, followed by 20 mA and adjust span. Repeat until both points are within tolerance, then check mid-range.
Maintenance and service life
Most field problems with I/P converters are caused by contaminated or wet supply air. Keep the supply filter and regulator serviced, drain moisture regularly and confirm the supply pressure still matches the model string. The datasheet describes an optional coalescing filter and regulator for this purpose.
At scheduled shutdowns, run a five-point calibration check against a reference pressure gauge and mA source. Replace the unit or send it for repair if it cannot be brought within the published accuracy.
Related products and ordering notes
Related Moore Industries current-to-pressure products on this site include the IPT2 transmitter. Other housings in the same family (DIN-rail, polymer field-mount, aluminum field-mount and explosion-proof) cover different environments, so tell us where the unit will be installed if you are unsure which one to quote.
State the complete model string, including options and housing, when you ask for a price, and mention whether a datasheet or certificate is required with the delivery.
Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer. Product names and model designations belong to their owners and are used here only to identify the equipment you are asking about.
Frequently asked questions in brief
- What does the IPT/4-20MA/3-15PSIG/20PSI/-FA1 -RTB [DIN] do? It converts a 4-20 mA signal into a 3-15 psig pneumatic signal using a 20 psi instrument air supply.
- Is the IPT/4-20MA/3-15PSIG/20PSI/-FA1 -RTB [DIN] for field mounting? It is a DIN-rail unit for control-room or cabinet use; the IPF or IPX families cover field housings.
- What is the accuracy of the IPT/4-20MA/3-15PSIG/20PSI/-FA1 -RTB [DIN]? The datasheet states less than 0.5% of span including linearity, hysteresis and repeatability for this range.
- What air supply does the IPT/4-20MA/3-15PSIG/20PSI/-FA1 -RTB [DIN] need? Filtered, regulated instrument air at 20 psig nominal; 30 psig can be applied without damage.
- How can I get a price for the IPT/4-20MA/3-15PSIG/20PSI/-FA1 -RTB [DIN]? Send an RFQ with the part number, quantity and delivery location in Oman or the GCC.
Documents and quotation
The manufacturer datasheet for the IPT-DIN family is available for download from this page, and it contains the full ordering table, dimensional drawings and wiring diagrams referred to above. To request a quotation, send an RFQ that includes the part number IPT/4-20MA/3-15PSIG/20PSI/-FA1 -RTB [DIN], the quantity you need, the delivery location in Oman or the GCC and any special requirements such as certification or documentation. We will confirm availability and lead time and reply with a written offer. Please check the datasheet and your own hazardous-area and safety requirements before you place an order.
Datasheets & Documents
- Datasheet IPT-DIN Current-to-Pressure Transmitter Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
Moore Industries is an American manufacturer of signal interface instruments, founded in 1968 by engineer Leonard W. Moore in North Hills, California. Its first product was the SCT signal converter, built in a friend's workshop. The company has been at its North Hills headquarters since 1974 and still designs and builds its products there, known for rugged aluminium housings.
Seven Star LLC, an independent supplier in Oman, lists Moore Industries temperature transmitters, limit alarm trips, isolators and a PID backup controller, and sources units and replacements by full model number.
Moore Industries company profile
| Founded | 1968, North Hills, California, USA, by Leonard W. Moore |
|---|---|
| Headquarters | North Hills, California, since 1974 |
| Ownership | Privately owned (Moore Industries-International, Inc.) |
| First product | SCT signal converter |
| Product families | Signal isolators and converters (ECT, SCT), temperature transmitters (TRY, THZ), alarm trip units (SPA), miniMOORE multichannel signal conditioners, HART interfaces, SIL-rated safety logic solvers (STA) |
Milestones
- 1968: Leonard W. Moore founds the company and builds the first SCT signal converter.
- 1974: The company moves into its North Hills headquarters.
- 2009: miniMOORE wins a Control Engineering Engineers' Choice Award.
Moore Industries product families on this page
The manufacturer's catalog is arranged by function, and many of the items listed here map onto it directly:
- Temperature transmitters: the TRX, and the STZ functional safety dual input smart HART transmitter
- Alarm trips: the SPA2 programmable limit alarm trip, including an SPA2 with HLPRG input and four relay outputs
- Signal isolators, repeaters and converters: the SIX
- PID controllers and backup stations: the 535 in 1/4 DIN format
Other catalog groups include temperature assemblies and sensors, I/P and P/I converters, remote I/O, HART gateways and interfaces, indicators, and fieldbus device couplers.
Where Moore Industries instruments are used
These are control room and marshalling cabinet devices, plus field-mounted transmitters. Typical jobs are isolating a 4-20 mA loop between two systems, converting a thermocouple or RTD signal for a DCS input, adding an independent high or low trip next to the control system, and keeping a control loop running on a backup station when the main controller is out of service. Process plants in oil and gas, chemicals and power across the GCC use them for exactly these tasks.
Moore Industries products we list
Ordering Moore Industries instruments: what we need
Moore Industries model numbers are built from fields separated by slashes: unit, input, output, power and options, followed by the housing code in brackets. Every field matters. Send the complete string from the label, the serial number, and for programmable units the input type and range you want set. State any hazardous area or functional safety requirement, because approved versions are ordered with their own option codes.
Facts checked against trade press obituaries of Leonard W. Moore (Control Engineering, Control Global), October 2026.
Browse Moore Industries products by category: Temperature Instrumentation, Controllers & Data Acquisition, Isolator & Barrier.
FAQ
Questions about the Moore Industries IPT/4-20MA/3-15PSIG/20PSI/-FA1
Answers from our engineering team on installation, compatibility and integration.
01What does the {pn} do?
It converts a 4-20 mA signal into a 3-15 psig pneumatic signal using a 20 psi instrument air supply.
02Is the {pn} for field mounting?
It is a DIN-rail unit for control-room or cabinet use; the IPF or IPX families cover field housings.
03What is the accuracy of the {pn}?
The datasheet states less than 0.5% of span including linearity, hysteresis and repeatability for this range.
04What air supply does the {pn} need?
Filtered, regulated instrument air at 20 psig nominal; 30 psig can be applied without damage.
05How can I get a price for the {pn}?
Send an RFQ with the part number, quantity and delivery location in Oman or the GCC.

















![Moore Industries IPT/4-20MA/3-15PSIG/20PSI/-FA1 -RTB [DIN] I/P Moore Industries IPT/4-20MA/3-15PSIG/20PSI/-FA1 -RTB [DIN] I/P](https://omansevenstar.com/wp-content/uploads/2026/11/moore-industries-ipt-din-4-20ma-3-15psig-current-to-pressure.webp)
Reviews
There are no reviews yet.