Brand:

IMI STI ER-08-S1-00-S-4E-A Exhaust Regulator 1/2 inch

Description

IMI STI ER-08-S1-00-S-4E-A overview

The IMI STI ER-08-S1-00-S-4E-A is a model code of the IMI STI ER exhaust regulator. The ER is an adjustable restrictor that limits the exhaust air flow of a pneumatic component. A setting screw adjusts the valve flow rate, so the stroking time of an actuator can be lengthened or shortened without changing the actuator or the positioner.

Decoding the code from the manufacturer’s model selection: size 08 is 1/2 inch, material S1 is stainless steel 316, copper free execution, painting 00 is not painted, temperature letter S is -20 to +70 degC, connection code 4E covers the supply and exhaust connections, and the option letter A means free exhaust. The instruction manual lists this exact model among the existing products with the part number 113370.

The IMI STI ER-08-S1-00-S-4E-A model code is taken from the existing-products table of the manufacturer’s instruction manual, which lists each model with an IMI STI part number (113370). Quoting the full code matters because the same family is built in several sizes, materials, temperature ranges and options, and only the complete code identifies the exact unit.

Key features of the ER-08-S1-00-S-4E-A

  • Adjustable restrictor on the exhaust line with a setting screw to tune actuator stroking time
  • 1/2 inch body in stainless steel 316, copper free execution
  • Free exhaust (option A) or collected exhaust (option C) per the model selection; the regulator can exhaust to atmosphere or to the actuator breather chamber in a closed breather loop
  • Gasket materials NBR, Viton or fluorosilicone listed for the family
  • Working pressure 3 to 12 bar with a design pressure of 12 bar
  • Working temperature range -20 to +85 degC across the family, extended range -60 to +100 degC
  • Expected lifetime stated as 30 years
  • Anodized external surface treatment listed for the family

ER-08-S1-00-S-4E-A technical specifications

The table below lists the data for the ER-08-S1-00-S-4E-A taken from the manufacturer’s published documents. Values that are not stated by the manufacturer are left out on purpose.

Model code ER-08-S1-00-S-4E-A
IMI STI part number (manual) 113370
Size 1/2 inch
Body material Stainless steel 316, copper free execution
Painting Not painted (code 00)
Temperature code S: -20 to +70 degC
Connection code 4E: supply and exhaust; exhaust connection sized 21-25 mm
Exhaust option A: Free exhaust
Working pressure 3 bar minimum, 12 bar maximum
Design pressure 12 bar
Working temperature (family) -20 to +85 degC; extended -60 to +100 degC
Storage temperature (family) -40 to +95 degC
Gasket material (family) NBR, Viton or fluorosilicone
Fluid Air
Lifetime 30 years

The ER family also offers aluminum bodies, painted finishes (standard painting cycle CVA.01 or customised) and other temperature and connection codes in the manufacturer’s model selection; not every combination is available, so confirm the code before ordering.

Typical applications in oil and gas, utilities, water and manufacturing

Refineries, petrochemical units and general manufacturing plants apply the ER-08-S1-00-S-4E-A to limit exhaust speed to tune the closing or opening time of a pneumatic actuator. Because the exact configuration affects performance, engineers normally confirm the supply pressure, temperature range and connection arrangement against the nameplate of the existing equipment before ordering.

In oil and gas facilities in Oman and across the GCC, the ER-08-S1-00-S-4E-A is typically found on actuator exhaust lines on valve packages that need a repeatable stroking time. Pneumatic accessories decide how fast and how stably an actuator strokes, so they are specified together with the actuator and positioner. Production, gathering and processing sites in the desert and offshore installations value equipment whose behaviour is well documented and whose spare parts can be identified by a clear part number.

Power and desalination plants use the ER-08-S1-00-S-4E-A where reliable control or safety stroking is needed on steam, feedwater, bypass and cooling circuits. Utilities and water treatment operators also use this type of equipment for dampers, control valves and isolation valves driven by instrument air, and the ER-08-S1-00-S-4E-A helps maintenance teams keep like-for-like replacements on the shelf.

Selection and compatibility notes for the ER-08-S1-00-S-4E-A

Choose the 1/2 inch size ER-08-S1-00-S-4E-A so that the exhaust connection matches the exhaust port of the actuator or quick exhaust valve. The manual gives the exhaust connection size for each size: 12-17 mm, 21-25 mm, 33-34 mm and 40-45 mm for the 1/4 inch, 1/2 inch, 1 inch and 1 1/2 inch bodies respectively.

Option A on the ER-08-S1-00-S-4E-A is free exhaust. Free exhaust vents the air without a collection arrangement, so confirm that local venting is acceptable. The manual recommends tubing of 8 mm or 3/8 inch for pilot lines and tubing larger than the product thread size for supply and exhaust lines.

Check the supply medium and pressure, the ambient temperature range and any hazardous-area requirement before ordering the ER-08-S1-00-S-4E-A. If a certificate or approval is needed for the installation in Oman or elsewhere in the GCC, state it in the request so that it can be checked against the manufacturer’s documents rather than assumed.

Installation and commissioning of the ER-08-S1-00-S-4E-A

Install the ER-08-S1-00-S-4E-A in the pneumatic circuit using the connection layout of its model code. Use clean instrument air, support the tubing so that no load acts on the body, and check all joints for leakage. Adjust any setting screw gradually, measure the actuator stroking time, and lock the screw once the required time is reached.

The manual recommends tubing of 8 mm or 3/8 inch for pilot lines and tubing larger than the product thread size for supply and exhaust lines. Keep exhaust lines free of restrictions that the design does not intend, because a blocked exhaust changes the stroking time.

Record the model code, the part number and the final settings of the ER-08-S1-00-S-4E-A on the commissioning sheet so that future maintenance and any reorder can refer to the same data.

Maintenance and service for the ER-08-S1-00-S-4E-A

Plan periodic inspection of the ER-08-S1-00-S-4E-A according to the instruction manual of the manufacturer. Typical checks are leakage at joints, condition of the air supply, mechanical wear or contamination, and confirmation that the setting still gives the required response.

Poor air quality is the most common cause of pneumatic accessory problems, so keep filter regulators and dryers serviced upstream of the ER-08-S1-00-S-4E-A. Replace elastomer parts only with the materials specified for the application, and do not modify the unit in the field.

When a unit fails, identify the exact model code and part number from the nameplate before ordering a replacement. For the ER-08-S1-00-S-4E-A this removes the risk of receiving a body with a different size, material or temperature range.

Related products and ordering notes for the ER-08-S1-00-S-4E-A

Items that are commonly specified together with the ER-08-S1-00-S-4E-A include: FCV flow control valve, SR and SRQ quick exhaust valves, BV big volume booster, SC/V pneumatic actuator. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer; product names and part numbers are used only to identify the items offered.

Lead times, availability and alternatives depend on the stock position at the time of the request. If the ER-08-S1-00-S-4E-A is not the exact configuration needed, send the nameplate data and we will suggest the closest match from the manufacturer’s published model selection.

ER-08-S1-00-S-4E-A frequently asked questions

What does the ER-08-S1-00-S-4E-A do? It is an adjustable restrictor on the exhaust line of a pneumatic component. A setting screw changes the flow rate and so the actuator stroking time.

What does the temperature letter S mean in ER-08-S1-00-S-4E-A? According to the model selection, letter S stands for -20 to +70 degC. Other letters cover -20 to +85, -40 to +70, -55 to +70 and -60 to +100 degC.

What is the manufacturer part number for the ER-08-S1-00-S-4E-A? The instruction manual lists the model ER-08-S1-00-S-4E-A with the part number 113370 among the existing products.

What operating pressure applies to the ER family? The technical data list a working pressure of 3 bar minimum to 12 bar maximum, with a design pressure of 12 bar.

How do I order the ER-08-S1-00-S-4E-A? Send the part number ER-08-S1-00-S-4E-A with the quantity and any special requirement to Seven Star LLC and we will reply to your RFQ.

Documents and quotation

The manufacturer’s manual for the ER-08-S1-00-S-4E-A is available from Seven Star LLC on request and is listed on this page for download. It should be read together with the nameplate data of the installed equipment.

To request a quotation, send an RFQ with the part number ER-08-S1-00-S-4E-A, the quantity, the required delivery location in Oman or the GCC, and any special requirement such as certification or documentation. We will reply with availability and commercial terms.

Other Models in the ER Range

Seven Star LLC supplies models from the ER range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
IMI STI ER-04-S1-00-S-2C-A Exhaust Regulator 1/4 inchAutomation AccessoriesView details
IMI STI ER-04-S1-00-S-2C-C Exhaust Regulator 1/4 inchAutomation AccessoriesView details
IMI STI ER-08-S1-00-S-4E-A Exhaust Regulator 1/2 inchAutomation AccessoriesYou are viewing this model
Datasheets & Documents
  • PDF Manual IMI STI ER-08-S1-00-S-4E-A Exhaust Regulator 1/2 inch Manual Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

IMI STI is an Italian manufacturer of pneumatic, hydraulic and direct-gas valve actuators, valve positioners and actuator accessories. It is based in Levate, near Bergamo, and is part of the IMI plc group (IMI Process Automation).

Seven Star LLC is an independent supplier in Muscat. We list IMI STI positioners, actuators and switches for valve automation in Oman and the GCC and source them by full model code.

IMI STI company profile

Established 1960, in Gorle (Bergamo), Italy
Manufacturing site Levate (Bergamo), Italy, since 2014. The plant is about 15 km from the original Gorle site.
Group IMI plc, Process Automation division. STI S.r.l. is the legal entity and IMI STI is the brand name.
Product families Quarter-turn Scotch yoke actuators, linear actuators, lift-and-turn actuators, stepper actuators, valve positioners, limit switches, pressure switches and pneumatic accessories
Typical duty Emergency shutdown and isolation valves, anti-surge valves, turbine bypass and steam valves, dampers and process control valves
Industries Oil and gas, power, petrochemicals, process industries, water and metals

Milestones

  • 1960: STI is founded in Gorle, Bergamo.
  • 2002: IMI plc acquires STI, according to the company's own literature.
  • 2014: Manufacturing moves to the new plant in Levate, about 15 km from Gorle.

IMI STI product series

Series Type Key published data
RTC Pneumatic Scotch yoke quarter-turn actuator Up to 12 bar supply, -30 to +100 °C ambient, 90° rotation; single-acting, double-acting or spring-return; air, nitrogen, sweet or sour gas; ISO 5211 mounting; SIL 3, ATEX, PED, IP66/67M
RTQ High-torque pneumatic Scotch yoke actuator For large ball, plug and butterfly valves in harsh environments; canted or symmetrical yoke
RTQD / RTQH Direct-gas and hydraulic Scotch yoke actuators RTQD: gas-over-oil, operating pressure up to 114 bar, -20 to +100 °C; RTQH: hydraulic version for sites with a hydraulic power supply
SC/V, SC Pneumatic linear actuators For globe and gate valves (SC/V) and for dampers (SC); SC/VLT is the lift-and-turn version
SHP Smart high-performance positioner HART 7, self-tuning, Cv up to 2.3, 2.5 to 10.5 bar supply, ATEX and IECEx, IP66 aluminium or stainless steel housing
SHP-SIS Safety positioner IEC 61508:2010 up to SIL 3, built-in partial stroke testing, -55 to +85 °C ambient
FasTrak FT, QuickTrak Smart digital positioners and valve control systems Digital positioning with valve diagnostics
SA/CL Analog positioner Analog positioner for control valve actuators
2130 Limit switch box Position feedback for rotary valve actuators

Scotch yoke actuators give their highest torque at the start and end of the stroke. That is where a ball, plug or butterfly valve needs the most break-out and seating torque, so a Scotch yoke can be smaller than a rack-and-pinion actuator for the same valve. A canted yoke moves the torque peak toward one end of the stroke, for valves whose highest demand is when they close. A symmetrical yoke gives the same curve in both directions.

Where IMI STI products are used

In the GCC, IMI STI actuators and positioners appear mostly on emergency shutdown (ESD) and blowdown valves, compressor anti-surge valves, steam turbine bypass valves and large dampers in oil and gas, refining, petrochemical and power plants. On shutdown valves the SHP-SIS positioner adds partial stroke testing, so the valve can be proven to move without taking the plant down.

Ordering and replacement: what we need

For an actuator, send the full model code from the nameplate, the valve type and size, required torque or thrust with safety factor, supply medium and pressure, fail position (fail-close, fail-open or fail-last), stroke time, mounting flange (ISO 5211) and stem adaptor, ambient temperature range and the hazardous-area certification required. For a positioner, send the model, actuator type, signal (4-20 mA, HART), whether partial stroke testing or a SIL rating is needed, and the cable entry thread. When a series has been superseded, we quote the successor that IMI names in its documentation and point out any differences in mounting or signal.

Facts checked against IMI Process Automation product pages and published company history, October 2026.

FAQ

Questions about the IMI STI ER-08-S1-00-S-4E-A Exhaust Regulator 1/2

Answers from our engineering team on installation, compatibility and integration.

01What does the ER-08-S1-00-S-4E-A do?
It is an adjustable restrictor on the exhaust line of a pneumatic component. A setting screw changes the flow rate and so the actuator stroking time.
02What does the temperature letter S mean in ER-08-S1-00-S-4E-A?
According to the model selection, letter S stands for -20 to +70 degC. Other letters cover -20 to +85, -40 to +70, -55 to +70 and -60 to +100 degC.
03What is the manufacturer part number for the ER-08-S1-00-S-4E-A?
The instruction manual lists the model ER-08-S1-00-S-4E-A with the part number 113370 among the existing products.
04What operating pressure applies to the ER family?
The technical data list a working pressure of 3 bar minimum to 12 bar maximum, with a design pressure of 12 bar.
05How do I order the ER-08-S1-00-S-4E-A?
Send the part number ER-08-S1-00-S-4E-A with the quantity and any special requirement to Seven Star LLC and we will reply to your RFQ.