Brand:

ifm IFS244 Inductive Sensor M12, 4 mm, IP69K, -40 to 85 C

Description

ifm IFS244 Inductive Sensor M12, 4 mm, IP69K, -40 to 85 C

The ifm IFS244 is an M12 x 1 inductive sensor, 45 mm long, with a flush 4 mm sensing range and a PNP normally open output. Its ambient range runs from -40 to 85 degrees Celsius and it is listed for IP65, IP66, IP67, IP68 and IP69K, which makes it a general-purpose choice when the same sensor must cover cold stores, hot enclosures and washdown. The own consumption is below 10 mA and the output carries 100 mA at 700 Hz.

The housing is brass with a white bronze coating, the sensing face is orange PBT and the LED window is PEI. Seven Star LLC supplies the IFS244 in Oman and the GCC as an independent supplier in Muscat.

IFS244 technical specifications

The table lists the values published by the manufacturer for the IFS244. Where a parameter has several operating modes, the headline value is shown; the full parameter list is in the manufacturer documentation.

Parameter Specification
Manufacturer / part number ifm electronic / IFS244
Sensing range [mm] 4
Thread designation M12 x 1
Dimensions [mm] M12 x 1 / L = 45
Mounting flush mountable
Real sensing range Sr [mm] 4 ± 10 %
Operating distance [mm] 0 to 3.24
Hysteresis [% of Sr] 3 to 15
Operating voltage [V] 10 to 30 DC
Current consumption [mA] < 10
Electrical design PNP
Output function normally open
Permanent current rating of switching output DC [mA] 100
Switching frequency DC [Hz] 700
Ambient temperature [°C] -40 to 85
Protection IP 65; IP 66; IP 67; IP 68; IP 69K
Weight [g] 24.8
Materials housing: brass white bronze coated; sensing face: PBT orange; LED window: PEI; lock nuts: brass white bronze coated
Connector 1 x M12; coding: A; Contacts: 3, gold-plated
MTTF [years] 1134

How the IFS244 works

An inductive proximity sensor such as the IFS244 generates a high-frequency magnetic field at its sensing face. When a metal target enters the field, eddy currents damp the oscillation, and the electronics switch the output. The real sensing range is stated for a standard steel target; other metals are detected at a shorter distance according to the correction factors in the table. No contact is made with the target, so there is no wear and the sensor is unaffected by dirt, oil or moisture on the target.

Where the IFS244 fits and related parts

Compared with the IFS204, which stops at 70 degrees Celsius and IP67, the IFS244 extends both the temperature window and the protection. The IFS240 offers the same range in a 60 mm body. For longer range the IGS233 and IGS204 use M18 housings.

Selection and ordering checklist for the IFS244

Work through the points below before you confirm the order, so that the IFS244 you receive is the one your machine or plant needs.

  • Check the ambient range of -40 to 85 degrees Celsius against the site
  • Check the PNP output and normally open function in your input card
  • Check the M12 x 1 thread, 45 mm length and flush 4 mm range
  • Check the three-contact M12 connector and the cordset rating
  • Decide whether a stocking choice of one sensor for many machines is desirable

The manufacturer lists this article under the type designation Inductive sensor, IFB3004BBPKG/US-104. The article number IFS244 is the reference to quote when ordering, and the type designation is useful for technicians who compare the label on an installed unit.

Installation, commissioning and maintenance

Screw the sensor into a bracket or tapped hole, locking it with the two supplied nuts within the stated torque. Flush or non-flush mounting decides how much free metal-free space is needed around the sensing face, so follow the mounting entry in the table. Align the target path with the sensing axis and set the working distance with margin below the stated operating distance, to allow for temperature drift. In commissioning, check the LED while moving the target through the range. Inspect the sensing face for impact and the cable or connector for damage.

Mount with the two brass lock nuts and keep the face clear of loose metal. Because the temperature range is wide, check the cable and cordset are also rated for the extremes. After commissioning, test the switching point with the actual target at its normal gap, allowing for the stated sensor tolerances.

Typical applications in Oman and the GCC

Cooling and lubrication circuits, mobile equipment, packaged compressor skids and valve actuators. In Oman and the GCC the 85 degrees Celsius upper limit and IP69K rating cover summer enclosure heat and washdown of outdoor skids.

Inductive sensors are among the most robust parts on a machine, but heat, vibration and repeated impacts still end their life. Choose the housing material and range to suit the environment, and keep spares of the common thread sizes.

IFS244 compared with related ifm types

The table places the IFS244 next to neighbouring types in the same application group, so you can see whether a sibling would suit the job better.

Part number Key characteristics Note
IFS200 M12 flush, 4 mm, brass, PNP/NPN, 4-pin M12 Related type
IFS240 M12 flush, 4 mm, L 60, IP65-IP69K Related type
IFS244 M12 flush, 4 mm, L 45, -40 to 85 C, IP69K This page
IGS204 M18 flush, 8 mm, L 45, PNP, plug Related type
IGS208 M18 flush, 8 mm, L 70, PNP/NPN, 2 LED Related type
IGS233 M18 non-flush, 12 mm, L 60, IP65-IP69K Related type
IIS207 M30 non-flush, 22 mm, L 70, PNP/NPN, 2 LED Related type
IIS208 M30 flush, 15 mm, L 50, PNP, plug Related type
IE5351 M8 flush, 3 mm, L 36, 0.3 m cable + M12 Related type

Information to send with an RFQ for the IFS244

To prepare an accurate offer for the IFS244, please include the following with your enquiry:

  • Thread size and body length required
  • Sensing range and the target material
  • Flush or non-flush mounting
  • Output wiring and connector or cable length
  • Quantity and delivery location

Documents and quotation

The official ifm data sheet for the IFS244 (document IFS244-01, English, issued 8 December 2023) is attached on this page as a PDF. It sets out the sensing range, the electrical data, the output function, the operating conditions, the approvals and the dimension drawing for this article. Check these values and the wiring diagram against your application before ordering, then send us the quantity and the delivery location for a quotation.

Seven Star LLC is an independent supplier in Muscat serving Oman and the GCC and is not affiliated with the manufacturer; the name ifm is used only to identify the product. Prices are not shown on the page, so send the part number, the quantity and the delivery location to receive a quotation.

Other Models in the Ifm61 Ind Range

Seven Star LLC supplies models from the Ifm61 Ind range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
ifm IFS200 Inductive Sensor M12, 4 mm, Two-Wire, BrassAutomation AccessoriesView details
ifm IFS240 Inductive Sensor M12, 4 mm, 60 mm Body, IP69KAutomation AccessoriesView details
ifm IFS244 Inductive Sensor M12, 4 mm, IP69K, -40 to 85 CAutomation AccessoriesYou are viewing this model
ifm IGS204 Inductive Sensor M18, 8 mm, Brass, PNPAutomation AccessoriesView details
ifm IGS208 Inductive Sensor M18, 8 mm, 70 mm Body, 2 LEDAutomation AccessoriesView details
ifm IGS233 Inductive Sensor M18, 12 mm Non-Flush, IP69KAutomation AccessoriesView details
ifm IIS207 Inductive Sensor M30, 22 mm Non-Flush, 2 LEDAutomation AccessoriesView details
ifm IIS208 Inductive Sensor M30, 15 mm Flush, Brass, PNPAutomation AccessoriesView details
ifm IE5351 Inductive Sensor M8, 3 mm, 0.3 m Cable with M12Automation AccessoriesView details
Datasheets & Documents
  • PDF Datasheet ifm IFS244 Data Sheet (PDF) Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

ifm is a German family-owned maker of sensors and automation products, founded in Essen in October 1969 by Robert Buck and Gerd Marhofer. Its first products were inductive proximity sensors sold under the efector name. ifm is still headquartered in Essen, and the founders' sons, Martin Buck and Michael Marhofer, have led it since 2001.

Seven Star LLC lists ifm position, distance and pressure sensors and supplies them by exact article number to plants and machine builders in Oman and the wider Gulf region.

ifm company profile

Founded 1969, Essen, Germany
Founders Robert Buck and Gerd Marhofer
Headquarters Essen, Germany
Ownership Family-owned
Product families Inductive and capacitive proximity sensors, PN pressure sensors, O1D laser distance sensors, flow and level sensors, IO-Link masters

Milestones

  • 1969: ifm is founded in Essen.
  • 2001: The founders' sons take over management.

ifm sensors listed on this page

ifm identifies every device with a short article number, and that number is what we order against. Three are listed here:

  • O1D100: laser distance sensor for position and distance measurement
  • PN7093: pressure sensor with local display
  • NG5021: inductive proximity sensor with NAMUR output

Other ifm inductive sensors, pressure sensors and connection cables can be quoted on request when you send the article number.

ifm products we list

Family Examples
Inductive Proximity Sensors NG5021 Inductive NAMUR Proximity Sensor
Laser Distance, LiDAR & Radar Sensors O1D100 Laser Distance Sensor
Pressure Instrumentation PN7093 Pressure Sensor with Display

Ordering ifm sensors: what we need

Send the six-character article number printed on the housing (two letters and four digits, or similar). If the label is worn, a photo plus the thread size, sensing range, output type and connector style is enough for us to check the part against ifm documentation. For NAMUR sensors, tell us which isolating amplifier is in the loop. Buyers in the GCC who need a successor for a discontinued article can send the old number and we will check the replacement the manufacturer names.

Facts checked against ifm's own 50-year chronicle (ifm.com), October 2026.

FAQ

Questions about the ifm IFS244 Inductive Sensor M12, 4 mm, IP69K, -40

Answers from our engineering team on installation, compatibility and integration.

01What temperature range does the ifm IFS244 cover?
-40 to 85 degrees Celsius ambient. This is the value published by the manufacturer for the IFS244; confirm details before ordering.
02What is the output of the IFS244?
A PNP output with normally open function, rated 100 mA continuous.
03What protection ratings are listed for the IFS244?
IP65, IP66, IP67, IP68 and IP69K. This is the value published by the manufacturer for the IFS244; confirm details before ordering.
04What is the current consumption of the IFS244?
Less than 10 mA without load. This is the value published by the manufacturer for the IFS244; confirm details before ordering.
05Which materials make up the IFS244 housing?
Brass with a white bronze coating, an orange PBT sensing face and a PEI LED window.