Schneider Electric HMIGTO3510 Harmony GTO 7 in. WVGA

HMIGTO3510 a Harmony GTO 7 in. panel with 96 MB flash

The HMIGTO3510 is a Schneider Electric product listed in the datasheet as: advanced touchscreen panel, Harmony GTO, 800 x 480pixels WVGA, 7.0inch TFT, 96MB. The HMIGTO3510 is a 7-inch Harmony GTO advanced touchscreen panel with an 800 x 480 WVGA display, 96 MB of flash and eight function keys. It is programmed with Vijeo Designer and supports many controller protocols. Seven Star LLC supplies the HMIGTO3510 in Oman and the GCC as an independent supplier based in Muscat.

Decoding the reference: GTO is the Harmony GTO series and 3510 identifies the 7-inch WVGA model with 96 MB. The datasheet names an ARM926EJ-S processor.

Technical specifications of the HMIGTO3510

Hardware and interfaces of the HMIGTO3510

Supply voltage: 24 V DC. Supply voltage limits: 19.2 to 28.8 V. Display: Backlit colour TFT LCD. Resolution: 800 x 480 pixels WVGA.

The panel has a resistive touch screen rated 1000000 cycles, 65536 colours, and a backlight lifetime of 50000 hours. Supply is 24 V DC (19.2 to 28.8 V), with up to 8 W consumption and 30 A inrush.

Memory includes 96 MB flash and 128 kB backed-up RAM, with SD or SDHC card storage up to 32 GB. COM1 is RS232C on a SUB-D 9 connector and COM2 is an RJ45 serial link; the panel mounts flush by four screw clamps.

GTO in a system

The eight F1 to F8 keys are defined in the project, giving shortcuts without touching the screen. This is convenient for operators who wear gloves or for operations like jog and acknowledge.

Compared with the HMIDT351, this panel uses a 24 V supply only and has an SD card slot. Projects can differ in size, so check memory when porting an application.

Selection checklist for the HMIGTO3510

• Screen: 7-inch WVGA, 800 x 480.
• Memory: 96 MB flash.
• Keys: eight function keys.
• Storage: SD or SDHC up to 32 GB.
• Software: Vijeo Designer.
• Protocols: Modbus, Uni-TE and others.

Fitting and project transfer on the HMIGTO3510

Fit with four screw clamps against the panel and gasket. Connect the serial or Ethernet link and download the project from Vijeo Designer.

Use the SD card for recipe or log data and keep a backup of the card contents. If the panel is replaced, load the same project and verify the keys and communications settings.

Typical applications of the HMIGTO3510 in Oman and the GCC

In Oman and the GCC, such panels run machine interfaces in packaging, water treatment and process skids. Keep the supply clean and protect the panel from direct sun to retain the screen.

Dimensions, environment and approvals of the HMIGTO3510

For the HMIGTO3510, plan the mounting space from the datasheet: 218 mm (W) x 173 mm (H) x 60 mm (D). The HMIGTO3510 weighs 1.2 kg. Mounting, derating and enclosure choices follow the environmental data below, which should be compared with the actual panel temperature and the dust and humidity of the site in Oman and the GCC.

Ambient temperature limits in the datasheet: 0 to 50 °C. Relative humidity: 10 to 90 % without condensation. Ingress protection: IP20 IEC 60529 rear panel; IP65 IEC 60529 front panel. Operating altitude: < 2000 m. Vibration resistance: 3.5 mm 5 to 9 Hz – X, Y, Z directions for 10 cycles (approx. 100 min) – IEC 61131-2. Shock resistance: 147 m/s² 3 chocks in each direction X, Y and Z IEC 61131-2. Standards listed: UL 508; IEC 61000-6-2; IEC 61131-2. Certifications listed for this reference: CE; C-tick; KCC cULus; UKCA; UKEX.

Information to send with an RFQ for the HMIGTO3510

• Full reference and quantity required
• Existing equipment, panel or rack it must fit
• Supply voltage, load or signal details of the application
• Required delivery location and timing
• Whether a spare, a replacement or a new installation

Site conditions in Oman for the HMIGTO3510

Control cabinets in Gulf plants often run hot, because many sit in outdoor kiosks or in rooms where air conditioning is not always reliable. Before you finalise the HMIGTO3510, check the permitted ambient range and any derating stated by the manufacturer against the real temperature inside your panel, and leave the recommended spacing around the device so that heat can escape. Long cable runs between the field and the marshalling cabinet are common on large sites, so confirm the signal types, wiring limits and earthing arrangement early in the design.

It also helps to standardise on a small number of part numbers across a project. Keeping a few spare HMIGTO3510 units on site in Oman shortens recovery time after a fault, and documenting configuration settings makes replacement faster for the maintenance team.

Documents and quotation

A datasheet for this product is attached on this page. It lists the electrical, mechanical and environmental data summarised above.

Send us the part number, quantity and application and we will confirm availability and a quotation. Seven Star LLC is an independent supplier in Muscat and does not represent itself as an official channel of the manufacturer.