Schneider Electric TeSys F LC1F400 Contactor
Overview
The Schneider Electric LC1F400 contactor, part of the TeSys F high-power range, is engineered for large three-phase motors, heavy resistive loads, and capacitor-bank switching where the TeSys D range runs out of headroom. Rated 400 A at AC-3 duty and up to 500 A at AC-1, the Schneider Electric LC1F400 is specified whenever a facility needs to start or switch motors in the 200 kW-plus class reliably at up to 440 V, with an interrupt rating around 3200 A and cycling rates up to 2400 operations per hour.
As the official authorized partner and exclusive regional representative for Schneider Electric, Seven Star LLC proudly supplies the Schneider Electric LC1F400 range from stock in Muscat, backed by genuine factory warranty and technical support for engineering, procurement, and maintenance teams across Oman and the wider GCC. Every unit is sourced through Schneider Electric’s authorized distribution channel, ensuring buyers receive authentic components with correct coil ratings and complete documentation rather than unverifiable grey-market stock.
Operating Principle of the Schneider Electric LC1F400
Like all IEC power contactors, the Schneider Electric LC1F400 uses an electromagnetic coil to pull a moving armature that closes three main power poles simultaneously, switching heavy three-phase current through robust copper and silver-alloy contact surfaces sized for the thermal and mechanical stress of repeated high-current cycling. The contactor body ships without a coil so the coil voltage – commonly 110 V, 120 V, 220–240 V AC, or a DC option – can be matched exactly to the control system at hand, avoiding the wasted stock of a fixed-coil design across mixed-voltage sites.
Because the LC1F400 is drawer-mounted, the power module can be withdrawn from its base for inspection, contact-tip replacement, or full unit swap without disturbing the fixed bus-bar and cable connections behind it – a design decision that materially cuts the downtime of a large-motor starter panel during maintenance. Bolt terminals rated for both bar and lugged-cable connection accept the heavier conductor sizes that 400 A switching demands, and the contact system is designed to resist welding under the inrush current typical of large induction motor starting.
Engineering Design of the Schneider Electric LC1F400
Specification engineers valuing the Schneider Electric LC1F400 for its serviceability will find the Schneider Electric LC1F400 housing uses the same self-extinguishing, arc-resistant thermoplastic construction found across the TeSys range, scaled to the larger frame required for 400 A power poles and their associated arc chutes. Bolt-type terminals on both line and load sides accept copper bar or crimped cable lugs, and mounting brackets at the top of the unit support drawer-style installation into a motor control center or fixed panel mounting where drawer-out service is not required.
Multi-standard certification – IEC, UL, CSA, CCC, EAC, and marine approval – makes the Schneider Electric LC1F400 suitable for both GCC infrastructure projects and export-oriented industrial builds that must satisfy more than one regulatory regime. The contactor accepts the same family of auxiliary contact blocks, mechanical and electrical interlocks, and coil suppressor modules used elsewhere in the TeSys F range, and pairs directly with LR9F electronic overload relays mounted on a dedicated support plate below the contactor body.
Key Features
The Schneider Electric LC1F400 is built for facilities running large motors that cannot be served by a standard-frame contactor, and its features reflect that duty:
- Rated 400 A at AC-3 and up to 500 A at AC-1, covering motor loads well beyond the TeSys D range.
- Interrupt rating around 3200 A supports demanding starting and switching duty on large induction motors.
- Supplied as a coil-less body, letting panel builders select the exact 110–240 V AC or DC coil required for each installation.
- Drawer-mount construction allows the power module to be withdrawn for service without disturbing fixed wiring.
- Bolt terminals accept both copper bar and lugged cable for heavy-gauge conductor termination.
- Rated for continuous operation up to 55°C ambient, suited to non-air-conditioned plant rooms in the Gulf.
- Supports cycling rates up to 2400 operations per hour for duty-cycle switching applications.
- Multi-standard certified across IEC, UL, CSA, CCC, EAC, and marine approvals for cross-market projects.
Industrial Applications
The Schneider Electric LC1F400 is the standard choice across Oman and the GCC for switching large motors in RO desalination intake and high-pressure pumps, district cooling plant chillers, and heavy compressor trains where currents routinely exceed 300 A. It also serves capacitor-bank switching duty in power factor correction panels for industrial facilities where reactive power charges are a material operating cost, and appears throughout large HVAC air-handling plant serving commercial towers in Muscat.
As the officially authorized partner for Schneider Electric, Seven Star LLC distributes the LC1F400 to EPC contractors and panel integrators building motor control centers for the petrochemical and metals industries in the Sohar and Salalah economic zones, where large-frame contactor reliability is a direct driver of plant uptime. The same platform is specified in utility-scale water treatment and power generation auxiliary systems across the Sultanate, wherever a heavy three-phase load needs dependable, serviceable switching.
Technical Specifications
Key electrical and mechanical parameters for the Schneider Electric LC1F400 are summarized below.
| Parameter | Specification |
|---|---|
| Model | LC1F400 (TeSys F range) |
| Rated Operational Current (AC-3) | 400 A |
| Rated Operational Current (AC-1) | Up to 500 A |
| Rated Operational Voltage | Up to 440 V AC |
| Interrupt Rating | Approx. 3200 A |
| Poles | 3P (3 NO) |
| Coil Voltage | 110–240 V AC or DC options (supplied separately) |
| Terminal Type | Bolt terminals, bar or lugged cable |
| Mounting | Drawer-out or fixed panel mounting |
| Max Switching Rate | Up to 2400 cycles/hour |
| Standards | IEC, UL, CSA, CCC, EAC, Marine |
| Operating Temperature | Up to +55°C ambient |
Request a Quote for Schneider Electric TeSys F LC1F400 Contactor
Panel builders and plant engineers in Oman and the GCC can request a formal RFQ for the Schneider Electric LC1F400 contactor from Seven Star LLC, with regional warehouse stock in Muscat and full technical datasheets available on request. As the authorized partner for Schneider Electric in Oman and the GCC, our instrumentation and automation division supports coil selection, sizing, and after-sales service for every LC1F400 order – contact Seven Star LLC today to confirm availability and lead time.
Related Products
- Schneider Electric TeSys Track Condition Monitoring System
- Schneider Electric Altistart 48 Soft Starter
- Schneider Electric TeSys D LC1D Contactor
- Schneider Electric TeSys Giga LC1G High-Power Contactor
- Schneider Electric TeSys Q Motor Disconnect Switch
- Schneider Electric ATS22D17Q Altistart 22 Soft Starter
Reviews
There are no reviews yet.