Schneider Electric TeSys Q Motor Disconnect Switch
Overview
Schneider Electric TeSys Q is a motor disconnect switch built for industrial and commercial electrical installations in Oman and across the GCC. It combines rugged construction with proven load switching and isolation performance, making it a dependable choice for panel builders and facility engineers on new installations and retrofits alike. The design accounts for the high ambient temperatures and dust loading typical of Gulf industrial sites, and technical support is available through Schneider Electric’s regional engineering network.
With engineering support in Muscat, Seven Star LLC supplies the Schneider Electric TeSys Q with manufacturer documentation and local technical support throughout Oman, Muscat, and the broader GCC. Buyers can source the Schneider Electric TeSys Q through Seven Star LLC with a formal quotation, the manufacturer datasheet and technical support with selection.
Operating Principle
The Schneider Electric TeSys Q provides positive, visible load-break isolation through a rotary or lever-operated mechanism that snaps its contacts open and closed independently of operator speed, ensuring a clean, arc-controlled break even under full rated load. Internal quick-make quick-break contact design keeps arcing time to a minimum, protecting the contact surfaces and the surrounding installation while giving maintenance personnel a certifiable point of isolation.
In practice, this operating principle gives the TeSys Q consistent, repeatable performance over a long service life with minimal maintenance. Behaviour stays predictable under varying load and environmental conditions, and the unit integrates easily into new or existing Schneider Electric systems, including EcoStruxure-enabled monitoring architectures where applicable. That makes it a sound long-term choice for load switching and isolation duties in facilities where unplanned downtime is costly.
Engineering Design of the Schneider Electric TeSys Q
Manufactured in a compact, panel-mountable enclosure, the Schneider Electric TeSys Q integrates a padlockable operating handle for lockout-tagout compliance and clear ON/OFF position indication visible even with the enclosure door closed. Terminal design accommodates both copper and aluminium conductors across a wide current range, and the mechanism is rated for tens of thousands of operating cycles without degradation of switching performance.
Each unit goes through Schneider Electric’s standard quality and type-test regime, covering dimensional consistency, insulation performance and mechanical durability over the rated operating life. Installers in Sohar, Salalah and the Muscat governorate report straightforward commissioning and reliable long-term operation when the TeSys Q is installed to Schneider Electric guidelines. Seven Star LLC’s technical team can advise on sizing and installation practice before you order.
Key Features
The Schneider Electric TeSys Q delivers a combination of engineering benefits that make it a preferred choice for Schneider Electric load switching and isolation specifiers across the region:
- Positive quick-make quick-break switching independent of operator handle speed.
- Padlockable handle supporting full lockout-tagout safety procedures.
- Compact enclosure suitable for space-constrained motor control centers and panels.
- Wide current rating range covering light industrial through heavy motor-load applications.
- Clear mechanical ON/OFF indication visible from outside the enclosure.
- High mechanical and electrical endurance validated to IEC 60947-3.
- Terminal design compatible with both copper and aluminium cabling.
- Optional auxiliary contacts for remote status signaling and interlocking.
Industrial Applications
Facility engineers across Oman’s manufacturing, water desalination, and district cooling plants specify the Schneider Electric TeSys Q as the primary local isolation point ahead of motors, pumps, and distribution feeders. Its robust construction and certified lockout capability make it a standard choice for maintenance-critical installations throughout the Sohar and Salalah industrial zones.
Seven Star LLC supplies the TeSys Q to EPC contractors, panel builders and end users in Oman’s oil and gas, petrochemical, water desalination, district cooling and commercial real estate sectors. From commercial towers in Muscat to the Sohar and Salalah free zones, it is specified for greenfield projects and brownfield upgrades alike, backed by regional supply and support.
Technical Specifications
The table below summarizes the principal technical characteristics of the Schneider Electric TeSys Q as published by Schneider Electric; compatible accessories, mounting variants, and rating options for the Schneider Electric TeSys Q are available through Seven Star LLC on request.
| Parameter | Specification |
|---|---|
| Model | Schneider Electric TeSys Q |
| Rated Current | 20–800A (variant dependent) |
| Rated Voltage | 690V AC max |
| Poles | 3P / 4P configurations |
| Mechanical Life | >10,000 operating cycles |
| Lockout | Padlockable handle, up to 3 padlocks |
| Standard | IEC 60947-3 |
| Mounting | Panel or DIN-rail depending on frame size |
| Operating Temperature | -25°C to +70°C |
Request a Quote for Schneider Electric TeSys Q Motor Disconnect Switch
To request a formal RFQ for the Schneider Electric TeSys Q, contact Seven Star LLC. We supply Schneider Electric equipment across Oman and the GCC with lead time confirmed at quotation, provide full technical datasheets on request, and offer application engineering support and technical support through our instrumentation and electrical distribution division. Units are supplied with manufacturer documentation, and multi-unit orders for larger projects are welcome.
Other Models in the Schneider Electric TeSys Motor Control Range
Seven Star LLC supplies models from the Schneider Electric TeSys Motor Control range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.
| Model | Category | |
|---|---|---|
| Schneider Electric TeSys Deca LC1D Contactor | Electrical & Power | View details |
| Schneider Electric TeSys D LC1D Contactor | Electrical & Power | View details |
| Schneider Electric TeSys F LC1F400 Contactor | Electrical & Power | View details |
| Schneider Electric TeSys Giga LC1G High-Power Contactor | Electrical & Power | View details |
| Schneider Electric TeSys LRD Thermal Overload Relay | Electrical & Power | View details |
| Schneider Electric TeSys Ultra Overload Relay | Electrical & Power | View details |
| Schneider Electric TeSys Vario Disconnect Switch | Circuit Breakers | View details |
| Schneider Electric TeSys Q Motor Disconnect Switch | Circuit Breakers | You are viewing this model |
| Schneider Electric TeSys Track Condition Monitoring System | Motor Soft Starters | View details |
Related Products
- Schneider Electric TeSys LR9F Electronic Overload Relay
- ABB AF16Z-30-10-30 3-Pole Contactor 24VDC (1SBL176001R3010)
- Schneider Electric Altistart 480 ATS480D62Y – Soft Starter (62 A, 208–690 V AC)
- Schneider Electric TeSys Track Condition Monitoring System
- Schneider Electric TeSys D LC1D Contactor
- Schneider Electric Altistart 48 Soft Starter
Schneider Electric product families on this page
Low voltage protection covers Acti9 miniature breakers and their communicating system, ComPacT NSX and PowerPacT H-frame molded case breakers and MasterPact NW air circuit breakers. Altivar 320 variable speed drives appear in several ratings, for example the ATV320U22N4C at 2.2 kW and the ATV320U75N4B at 7.5 kW. Automation is represented by Modicon TM3 expansion modules such as the TM3TM thermocouple input module. Metering includes the EasyLogic PM2000 power meter and iEM2000 modular energy meters. Trihal cast resin transformers and Spacial enclosure accessories complete the electrical distribution side.Where Schneider Electric equipment is used
Main and distribution switchboards in buildings, utilities and industrial plants carry the breakers and meters. Altivar drives run pumps, fans, conveyors and packaging machines. Modicon controllers with TM3 I/O are common in machine builders' panels, and Trihal transformers serve indoor substations where a dry-type unit is specified.Ordering Schneider Electric parts: what we need
The commercial reference printed on the product or its carton is the fastest route. For breakers without a reference send rated current, breaking capacity, number of poles, trip unit type, fixed or drawout construction and the accessories fitted, such as shunt trip, auxiliary contacts or motor mechanism. For drives give motor power, supply voltage and the communication option. For transformers send rated power, primary and secondary voltage, vector group and enclosure rating.Browse Schneider Electric products by category: Circuit Breaker, Electrical & Power Modules, AC Drives, PLC & I/O Cards, Metering Systems.
Reviews
There are no reviews yet.