- Automation & ControlView all 2,895 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- Pneumatic Cylinders
- HMI Displays
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: SMC
SMC IP8101-030 IP8101 Smart Positioner
Description
SMC IP8101-030 IP8101 smart rotary type positioner
The SMC IP8101-030 is a smart positioner of the IP8101 series. It is an electronically controlled positioner that is driven by a 4 to 20 mA DC signal and has an auto calibration function, which sets the zero and span of the stroke automatically instead of by repeated manual adjustment. The unit is a smart rotary type version, so it is designed for a rotary shaft with a stroke angle of 60 to 100 degrees, and this part number is the basic type.
The positioner is housed in an aluminum die-cast body with an epoxy baking finish, and it conforms to IP65 under JIS F 8007 (IEC 60529) according to the catalog. The air connection is Rc 1/4 in the standard thread configuration. The basic SMC IP8101-030 keeps the wiring simple: a two-wire current loop and the pneumatic supply and output connections.
Positioners of this class sit between the control system and the actuator of a control valve or damper: the controller sends a 4 to 20 mA signal and the IP8101-030 adjusts the air pressure to the actuator until the measured position matches the command. When a valve hunts, sticks or does not reach its end positions, the positioner is often the first component to check, and buyers who maintain installed valves frequently search for the exact code IP8101-030 from the nameplate.
Key features of the IP8101-030
- Input signal: 4 to 20 mA DC, with an output flow of 80 L/min (ANR) or more at a supply pressure of 0.14 MPa and 200 L/min (ANR) or more at 0.4 MPa according to the catalog table.
- Supply air pressure: 0.3 to 0.7 MPa.
- Auto calibration, a body with LCD window option, HART transmission function option and a monitoring function with alarm points are available in the IP8001 and IP8101 series.
- Accuracy: sensitivity within 0.2 percent F.S., linearity within plus or minus 1 percent F.S., hysteresis within 0.5 percent F.S. for the IP8101-030 class.
- Repeatability within plus or minus 0.5 percent F.S.
- Temperature coefficient within 0.05 percent F.S. per degree Celsius.
- Enclosure IP65 according to JIS F 8007, with a centralized exhaust that combines a check valve and a labyrinth effect to keep dust and water out.
- Air connection Rc 1/4, with NPT and G thread versions available through the connection code of the series.
- Weight of 2.6 kg for the IP8101-030 body.
IP8101-030 technical specifications
The table below lists the values the manufacturer publishes for the IP8101-030 and its series. Always confirm the final configuration against the datasheet before ordering.
| Parameter | Value |
|---|---|
| Series | IP8101 smart rotary type |
| Part number | IP8101-030 |
| Input current | 4 to 20 mA DC (standard) |
| Minimum operating current | 3.85 mA DC or more |
| Terminal voltage | 12 V DC equivalent to 600 ohm input resistance at 20 mA DC |
| Supply air pressure | 0.3 to 0.7 MPa |
| Standard stroke | 60 to 100 degrees |
| Sensitivity | Within 0.2 percent F.S. |
| Linearity | Within plus or minus 1 percent F.S. |
| Hysteresis | Within 0.5 percent F.S. |
| Repeatability | Within plus or minus 0.5 percent F.S. |
| Temperature coefficient | Within 0.05 percent F.S. per degree C |
| Output flow | 80 L/min (ANR) or more at SUP 0.14 MPa; 200 L/min (ANR) or more at SUP 0.4 MPa |
| Ambient and fluid temperature (general structure) | Minus 20 to 80 C |
| Enclosure | IP65 (JIS F 8007, IEC 60529) |
| Air connection | Rc 1/4 female thread (standard) |
| Pressure gauge fitted | 1.0 MPa |
| Material | Aluminum die-cast body, baking finish with denatured epoxy resin |
| Weight | 2.6 kg |
Typical applications in Oman and the GCC
In oil and gas, refining and petrochemical plants in Oman and the GCC, positioners such as the IP8101-030 are fitted to pneumatic actuators on control valves, dampers and louvers that regulate flow, level and pressure loops. The IP65 enclosure and the temperature range of minus 20 to 80 degrees Celsius for the general structure make it suitable for open plant areas and sun-exposed skids when the installation is shaded and the supply air is dry.
In power and desalination plants, water treatment and district cooling, the IP8101-030 is used on pneumatic actuators of throttling valves and dampers where accurate position holding is needed. For manufacturing sites the same positioner suits process lines with pneumatic cylinders and rotary actuators. For hazardous areas, the series also has intrinsically safe and TIIS explosion-proof constructions under different codes; this unit itself is the non-explosion-proof general construction, so confirm area classification before ordering.
A positioner closes a small control loop around the actuator. The control system sends a command, usually 4 to 20 mA, the positioner compares it with the measured actuator position and adjusts the air pressure to the actuator until the two agree. Compared with sending the command straight to a valve actuator, this loop overcomes friction in the packing, changes in the supply pressure and the force of the process fluid on the plug, so the valve reaches the commanded opening more repeatably.
For plant owners, a positioner is also a maintenance asset. Sticking, backlash in the feedback link, worn gaskets and contaminated air are all visible as hunting or slow response, and many of these faults are cured by replacing the positioner or cleaning the air supply rather than the valve itself. Keeping a spare of the same code on the shelf can shorten an outage considerably, especially on loops that cannot run in manual for long.
Lever type positioners are used on linear actuators such as diaphragm and piston actuators with a stem stroke, while rotary types are used on quarter-turn actuators fitted to ball, butterfly and plug valves. Choosing the wrong type, or the wrong mounting bracket, is the most frequent reason for a delayed commissioning, so please state the actuator make, model and stroke or angle with your RFQ whenever you can.
Buyers in Oman often request the exact SMC code for a unit already installed on a skid or a damper actuator. In that case, send the nameplate photo, the supply pressure and the signal type, and we will check the code digits for gauge range, construction and accessories with you before quoting.
Selection and compatibility notes for the IP8101-030
Choose lever or rotary construction according to the actuator motion. The IP8101-030 is the rotary type, so it needs a rotary feedback of 60 to 100 degrees with a cam. Check the stroke of your actuator against these values and ask for the mounting kit or bracket that matches your actuator.
Confirm the signal and supply. The IP8101-030 works from a 4 to 20 mA DC command and needs a clean, dry supply of 0.3 to 0.7 MPa. If the actuator is single acting or double acting, check that the air connection and the output piping of the IP8101-030 match; the catalog covers both action types in the same series.
Check the pressure gauge range in the part number: the digit 3 in IP8101-030 means gauges of 1.0 MPa. If your actuator spring range or supply pressure is much lower or higher, a different gauge digit may suit the installation better.
Reading the part number
- IP8101: Smart Positioner series, smart rotary type.
- 0 at the start of the code block: standard variant code of the series.
- 3: pressure gauge range 1.0 MPa.
- 0: basic type.
- No suffix: no accessories, standard Rc 1/4 air connection and G 1/2 electrical connection as supplied in the standard configuration.
Installation and commissioning of the IP8101-030
Mount the IP8101-030 on the actuator using a bracket that fixes the positioner body at the correct distance from the feedback shaft or lever, and align the feedback so that the full actuator stroke corresponds to the usable range of the positioner. Connect supply air through a filter regulator, the output port to the actuator, and the 4 to 20 mA loop to the controller using the electrical port provided on the body.
During commissioning, run the auto calibration routine so the zero and span are set to the valve stroke, then check linearity at several points. Confirm that the exhaust path is free so the IP8101-030 can keep its dust and water protection, and tighten cable glands to keep the IP65 rating.
Maintenance and service life
Keep supply air filtered and dry, since moisture and oil mist are the usual cause of positioner drift. Check the exhaust, the feedback linkage and the mounting bracket of the IP8101-030 during planned shutdowns. If the valve hunts, check the supply pressure, the linkage play and the loop current before replacing the positioner.
When replacing a IP8101-030 in service, record the actuator type, the stroke and the supply pressure so that the new unit can be set up in the same way, and keep the old nameplate with the maintenance file.
Related products and ordering notes
Other variants of the series differ in the gauge range, the construction and the connection or accessory suffixes. If the nameplate of your positioner shows extra letters after the IP8101-030 base code, include them in your RFQ because they describe the accessories, thread type or approval version. The same catalog also covers the IP8100 and IP8101 rotary types and the explosion-proof versions for hazardous areas.
Frequently asked questions about the IP8101-030
- What does the IP8101-030 do? The IP8101-030 is a smart rotary type positioner that adjusts the air pressure to a pneumatic actuator according to a 4 to 20 mA DC command, so the valve reaches the commanded position.
- What air supply pressure does the IP8101-030 need? The IP8101-030 needs 0.3 to 0.7 MPa of clean, dry air according to the catalog.
- Is the IP8101-030 explosion proof? The IP8101-030 is the general construction without an approval; the series has intrinsically safe and TIIS explosion-proof versions under separate part numbers, so check the area classification first.
- What protection rating does the IP8101-030 have? The catalog states IP65 under JIS F 8007 (IEC 60529), with a centralized exhaust combining a check valve and a labyrinth.
- How do I request a quotation for the IP8101-030? Send an RFQ to Seven Star LLC with the part number IP8101-030, the quantity and your delivery location, and our team will confirm availability and lead time.
Documents and quotation
The manufacturer catalog covering the IP8101-030 is available as a datasheet download on this page, and it is the document to check for dimensions, wiring and option codes. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer. To receive a quotation, send the RFQ with the part number IP8101-030, the quantity, the required voltage or signal, the connection standard and your delivery location in Oman or the GCC. Our team will confirm availability and lead time for the IP8101-030 and reply with a formal offer.
Datasheets & Documents
- Datasheet SMC IP8101-030 Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
SMC is the Japanese specialist in pneumatic automation: air preparation units, solenoid valves, cylinders, fittings, process valves and sensors. Yoshiyuki Takada founded the company in Tokyo on 27 April 1959 as Shoketsu Kinzoku Kogyo, which means Sintered Metal Corporation, and its first products were sintered metal filters. SMC Corporation is headquartered in Tokyo and listed on the Tokyo Stock Exchange, and its products are used on machines and instrument air lines across the world.
Seven Star LLC, an independent supplier in Oman, lists SMC AW series filter regulators (AW20 and AW40) and the VX2 series direct-operated 2-port solenoid valve, and sources other SMC parts by full part number.
SMC company profile
| Founded | 27 April 1959, Tokyo, Japan, as Shoketsu Kinzoku Kogyo (Sintered Metal Corporation) |
|---|---|
| Founder | Yoshiyuki Takada (1928–2024) |
| First products | Sintered metal filters; pneumatic air line equipment from 1961 |
| Headquarters | Tokyo, Japan |
| Ownership | SMC Corporation, a public company listed on the Tokyo Stock Exchange |
| Product families | AF/AR/AW modular air preparation, VT/VQ/SY solenoid valves, VX/VXZ 2-port valves, air cylinders and rotary actuators, fittings and tubing, pressure and flow switches, vacuum equipment |
Milestones
- 1959: Shoketsu Kinzoku Kogyo is founded in Tokyo on 27 April and starts making sintered metal filters.
- 1961: Pneumatic air line equipment is added.
- 1964: Automatic control equipment becomes part of the business.
- 1967: The first overseas operation starts, with a stake in an Australian company.
- 1970: SMC begins making air cylinders.
SMC series listed on this page
The AW is a combined filter and pressure regulator in SMC's modular air preparation line. The body size is in the name: AW20 is the smaller unit and AW40 the larger, and the digits after the dash give the port size. A part number such as AW40-04-A therefore describes body size, port and options in one string. The VX2 is a direct-operated two-port solenoid valve for shutting off air, water, oil or steam, depending on the body and seal materials chosen.
SMC products we list
Ordering SMC parts: what we need
Give the complete SMC part number from the label, including thread prefix, options and the final suffix letter. For AW units state gauge, drain type and bracket if you need them. For VX2 valves send coil voltage, port size, orifice, body and seal material, and the fluid. Buyers in the GCC often have NPT or G threads on site, so say which thread standard the piping uses.
Facts checked against SMC's published corporate history, October 2026.
Browse SMC products by category: Regulators, Solenoid Valve.
FAQ
Questions about the SMC IP8101-030 IP8101 Smart Positioner
Answers from our engineering team on installation, compatibility and integration.
01What does the IP8101-030 do?
The IP8101-030 is a smart rotary type positioner that adjusts the air pressure to a pneumatic actuator according to a 4 to 20 mA DC command, so the valve reaches the commanded position.
02What air supply pressure does the IP8101-030 need?
The IP8101-030 needs 0.3 to 0.7 MPa of clean, dry air according to the catalog.
03Is the IP8101-030 explosion proof?
The IP8101-030 is the general construction without an approval; the series has intrinsically safe and TIIS explosion-proof versions under separate part numbers, so check the area classification first.
04What protection rating does the IP8101-030 have?
The catalog states IP65 under JIS F 8007 (IEC 60529), with a centralized exhaust combining a check valve and a labyrinth.
05How do I request a quotation for the IP8101-030?
Send an RFQ to Seven Star LLC with the part number IP8101-030, the quantity and your delivery location, and our team will confirm availability and lead time.


















Reviews
There are no reviews yet.