Siemens 6GK5795-6MP10-0AA0 ANT795-6MP IWLAN Omnidirectional Antenna

Overview

The Siemens 6GK5795-6MP10-0AA0, marketed as the ANT795-6MP, is an omnidirectional antenna engineered for Siemens SCALANCE Industrial Wireless LAN (IWLAN) access points and client modules operating across the 2.4 GHz, 5 GHz, and 6 GHz frequency bands. Its wide frequency coverage means a single antenna model can support Wi-Fi 6 and Wi-Fi 7 SCALANCE hardware, simplifying spare parts stocking for facilities running mixed-generation wireless infrastructure.

Seven Star LLC, a trusted supplier of Siemens products in Oman and the GCC, supplies genuine Siemens 6GK5795-6MP10-0AA0 antennas to plants extending SCALANCE wireless coverage across outdoor and semi-outdoor industrial areas. Every unit shipped is sourced through verified Siemens distribution channels, ensuring correct RF performance and long-term weather resistance for antenna installations exposed to Gulf-region sun, heat, and dust.

Measurement and Operating Principle

The ANT795-6MP radiates and receives radio frequency energy in an omnidirectional pattern with vertical polarization, providing consistent wireless coverage in all horizontal directions around the mounting point rather than favoring a single bearing. This makes it well suited to central mounting locations where wireless clients and mobile devices may approach from any direction, such as a mast at the center of a yard or a rooftop position overlooking a process area.

The antenna connects to its host SCALANCE access point through an N-Connect female connector and 50Ω impedance matched feedline, minimizing signal loss between the antenna and radio. Because the antenna covers 2.4, 5, and 6 GHz in a single unit, it supports simultaneous operation across multiple SCALANCE radio bands without requiring separate antennas per frequency, reducing the number of cable runs and mounting points needed at a given site.

Engineering Design

The Siemens 6GK5795-6MP10-0AA0 is built with a UV-resistant outer radome and IP67-rated housing, allowing continuous outdoor mounting on masts, walls, or structural steelwork without a protective enclosure. This level of environmental protection is particularly relevant for GCC deployments, where prolonged UV exposure and high ambient temperatures degrade lower-rated antenna housings over a shorter service life.

As part of the Siemens 6GK5795 antenna series, the ANT795-6MP shares its N-Connect interface and mechanical mounting approach with other SCALANCE antenna variants, letting site designers standardize mounting hardware across a facility even where different antenna gain or directivity patterns are needed in different zones. The antenna is typically paired with SCALANCE WAM and W700-series access points that expose N-Connect antenna ports for external antenna selection.

Key Features

• Omnidirectional coverage across 2.4 GHz, 5 GHz, and 6 GHz IWLAN frequency bands
• N-Connect female connector with 50Ω impedance for low-loss SCALANCE integration
• IP67-rated, UV-resistant housing for continuous outdoor exposure
• Vertical polarization for consistent all-direction wireless coverage
• Single antenna model supports multiple SCALANCE radio bands simultaneously
• Compatible with SCALANCE WAM and W700-series industrial access points
• Simplifies spare parts stocking across mixed-generation wireless installations
• RoHS-compliant genuine Siemens SIMATIC NET accessory

Industrial Applications

The Siemens 6GK5795-6MP10-0AA0 antenna is deployed on masts, rooftops, and structural mounting points across ports, refineries, mining sites, and large manufacturing yards where SCALANCE access points need broad, all-direction wireless coverage rather than a narrow directional beam. It is commonly paired with SCALANCE WAM766-1 EEC and similar extended-environment access points to complete an outdoor industrial wireless network.

Seven Star LLC supports outdoor SCALANCE wireless network builds across Oman’s port, oil and gas, and mining sectors, supplying the ANT795-6MP antenna to projects in Muscat, Sohar, and Salalah alongside compatible access point hardware. As a trusted supplier of Siemens products, Seven Star LLC provides antenna selection guidance to help GCC customers match coverage pattern and frequency support to their site layout when selecting the Siemens 6GK5795-6MP10-0AA0.

Siemens 6GK5795-6MP10-0AA0 Technical Specifications

Mounting and Installation Notes for the ANT795-6MP

Siemens specifies the ANT795-6MP for mounting on a mast or rail with a diameter of 42 to 60 mm, using the supplied L-bracket and U-bolts. Keep at least 300 mm between the antenna and nearby metal objects or surfaces, and do not mount it close to overhead or high-voltage power lines. The nut that secures the antenna to the bracket is tightened to a maximum of 12 Nm, and the union nut of the N-Connect cable to 1.35 to 1.5 Nm, while the antenna foot is held with a 30 mm open-ended wrench.

For outdoor installation, Siemens instructs that the antenna connection is sealed with weatherproof insulating tape, such as self-vulcanizing tape, or with a shrink-on sleeve. An antenna installed outdoors must be within the area covered by a lightning protection system, and all conductors entering from outside should be included in the lightning protection equipotential bonding in line with IEC 62305. These points are often missed on site and are worth planning before the mast is erected, because the IP67 rating of the antenna alone does not protect the connector joint or the connected access point.

Scope of Delivery and Items to Order Separately

The 6GK5795-6MP10-0AA0 package contains the antenna with N-Connect female connector, one toothed lock washer and one nut for fixing the antenna, and a mast mounting set with one bracket, two U-bolts with 5/16 inch UNC thread and the matching nuts, spring lock washers and washers. The flexible connecting cable between antenna and SCALANCE device is not included and has to be ordered separately in the required length. Gain figures quoted by Siemens are typical maximum values measured in free space with a 0.5 m cable, so longer cables reduce the usable gain.

Why Choose Seven Star LLC for Siemens IWLAN Antennas

An omnidirectional antenna’s gain, frequency range, and mounting position genuinely determine whether an industrial wireless access point delivers usable coverage across a plant floor or leaves dead zones near critical mobile equipment, so antenna selection deserves the same engineering attention as the access point itself. Seven Star LLC confirms the correct ANT795-6MP antenna specification against your access point model and coverage requirements before order confirmation, backed by our trusted Siemens suppliership across Oman and the wider GCC. We also support automation and OT teams across Sohar and Salalah with antenna placement guidance during wireless network commissioning, helping avoid the rework that comes from correcting coverage gaps after installation, and our team can advise on omnidirectional versus directional antenna selection depending on whether broad coverage across an open production floor or focused range down a long corridor or conveyor line is genuinely the actual priority for that specific coverage area.

Request a Quote

Contact Seven Star LLC for pricing, availability, and coverage planning support on the Siemens 6GK5795-6MP10-0AA0 ANT795-6MP antenna. Our team in Muscat serves customers across Oman and the GCC with genuine Siemens SIMATIC NET wireless accessories.

Related Products

• Blackview FORT 1 Rugged AI Smartphone
• Huawei MA5616 AC Chassis with CCUB Main Control Board and GP1A Uplink
• 16137-153 – Siemens ModuleBus Cable B-Side (4 M) for APACS+/QUADLOG
• Siemens 6XV1875-5AH50 N-Connect Antenna Connection Cable, 5m
• FEP IDS Card IDS CU-88A, order code: 160050560
• MGU Card 2X4E1/T1 Aastra/Ericsson