Brand: Winsonic

Winsonic NE24001-104313 Industrial 5G Router 4 Ports Cellular Routers / Gateways

Name: Winsonic NE24001-104313 Industrial 5G Router, 4 Ports
Brand: Winsonic

Description

Overview

The Winsonic NE24001-104313 industrial 5G router is a high-performance unit supporting both 5G Sub-6 SA/NSA networks and RedCap, purpose-built for dual-operator backup and mission-critical connectivity in industrial networks across the Gulf region.

With 1 WAN plus 4 LAN Gigabit Ethernet ports, dual-band 2.4GHz/5.8GHz Wi-Fi, dual SIM drawers, and dual redundant power inputs, the NE24001-104313 delivers carrier-grade reliability with an MTBF of 100,000 hours in a full metal fanless enclosure.

Engineering & Design

The router is engineered around a 512MB memory and 4GB eMMC flash platform with an industrial-grade 5G module, wide DC 9–36V power input with reverse polarity, overvoltage and overcurrent protection, and 1.5KV electromagnetic isolation on the Ethernet interfaces.

The full metal enclosure supports desktop, DIN-rail, and wall mounting, with natural convection cooling for silent operation between -35°C and +75°C. Every radio, Ethernet, serial, and SIM interface is protected with built-in ESD protection rated at 15KV.

Key Features

5G Sub-6 SA/NSA and RedCap network support with LTE and WCDMA fallback
1 WAN + 4 LAN 10/100/1000Mbps adaptive ports for flexible network architecture
Dual SIM drawer slots (1.8V/3V) for dual-operator network backup
Dual redundant DC power input with reverse polarity and surge protection
Dual-band 2.4GHz/5.8GHz Wi-Fi with optional Wi-Fi 6 support up to 1774Mbps
Multiple DNN support and APN/VPDN/slice network access
Comprehensive VPN suite: IPsec, OpenVPN, L2TP, PPTP, GRE, GRETAP, VxLAN
RS232/RS485 console port with 15KV ESD protection
Industrial protocols: Modbus, MQTT, and environmental protection 212 protocol
SNMP and StarCloud centralised management platform support
Embedded RTC with NTP time synchronisation
MTBF of 100,000 hours with IP30 protection

Applications

Industrial IoT and smart factory connectivity
Remote terminal unit backhaul for oil and gas sites
Smart city and traffic management networks
Utilities, water, and wastewater monitoring networks

Specifications

Memory	512MB RAM, 4GB eMMC flash
Network Support	5G Sub-6 SA/NSA, RedCap, LTE, WCDMA
Ethernet	1× WAN + 4× LAN, 10/100/1000Mbps adaptive, 1.5KV isolation
Wi-Fi	2.4GHz/5.8GHz dual-band, up to 866.7Mbps (optional Wi-Fi 6 to 1774Mbps)
SIM Interface	2× drawer-type slots, 1.8V/3V SIM/UIM, 15KV ESD
USB	1× USB 2.0
Console Port	1× 5-pin RS232/RS485 with 15KV ESD protection
Power Input	DC 9–36V wide range, dual input terminals, external 12V 2A adapter
Power Consumption	Standby 300–500mA, operating 500–700mA @12V
VPN	PPTP, L2TP, IPsec, OpenVPN, GRE, GRETAP, VxLAN
Industrial Protocols	Modbus, MQTT, environmental protection 212
Management	SNMP, StarCloud platform, Web GUI, NTP with RTC
Enclosure	Full metal, 126×44×166mm, net 0.67kg, IP30
Operating Temperature	-35°C to +75°C, storage -40°C to +85°C, humidity 5–95%

Compatibility & Integration

The NE24001-104313 supports APN, VPDN, and slice network access with CHAP/PAP authentication and can be managed centrally through StarCloud alongside other Winsonic devices for large multi-site rollouts.

Deployment Assistance

Our engineers assist with antenna placement, dual SIM carrier selection for maximum availability, and integration with Modbus and MQTT-based IIoT platforms, ensuring the router performs as an integral part of your industrial network.

Post-installation support covers firmware updates, performance monitoring, and troubleshooting guidance through direct contact with our technical team in Oman.

Operational Benefits

The NE24001-104313 delivers carrier-grade reliability with its dual SIM configuration, redundant power inputs, and 100,000-hour MTBF, minimising unplanned downtime at remote and unmanned sites.

Its four LAN ports allow direct connection of field controllers, cameras, and local networks alongside WAN backhaul, simplifying cabinet design and reducing component count.

Support for Modbus, MQTT, and the environmental protection 212 protocol means data from legacy field devices can be transported directly over the cellular link without protocol converters.

For networks where this router must provide reliable 5G connectivity, our engineers configure each unit for your carrier and APN before dispatch.

The Winsonic NE24001-104313 industrial 5G router with the 4 LAN ports serves the local devices and is DIN rail mounted.

The Winsonic NE24001-104313 industrial 5G router is also DIN rail mounted.

The Winsonic NE24001-104313 industrial 5G router covers the 5G uplink.

Why Seven Star LLC

Seven Star LLC is the official authorized representative of Winsonic in Oman, which means every NE24001-104313 we deliver comes with manufacturer documentation and technical support. We supply on request from Muscat and provide configuration and technical support for projects across Oman and the GCC.

Our team verifies firmware, SIM compatibility, and antenna requirements and provides after-sales support to keep your industrial network online.

Installation and Commissioning Guide

Before the router goes into a panel, confirm which operators will serve the site and check 5G coverage at the exact antenna position, not just at the building entrance. Metal enclosures, steel structures and buried pump rooms can attenuate cellular signals heavily, so plan external antennas with short, low-loss cable runs where the cabinet is shielded.

Mount the unit on DIN-rail, wall or desktop and leave space around the metal housing for natural convection.
Wire both DC power inputs from separate supplies where possible, so a single supply fault does not take the link down.
Insert and activate both SIM cards, then configure primary and backup operator priorities and failover rules.
Connect the WAN port to any fixed-line uplink and the LAN ports to PLCs, RTUs, cameras or HMIs.
Change default credentials, set firewall rules and VPN tunnels, and record the final configuration for the maintenance file.

Network Integration Tips

In SCADA and telemetry networks the router usually sits between remote field equipment and a central control room. Plan a fixed IP addressing scheme, keep control traffic on a separate VLAN or tunnel from CCTV or office traffic, and test a deliberate failover by removing the primary SIM during commissioning. This confirms the backup path actually carries the application traffic before the site is handed over.

Maintenance and Troubleshooting

Most field issues with cellular gateways come from antennas, SIM provisioning or power rather than the router itself. If throughput drops or the link flaps, check signal quality readings, inspect antenna connectors for corrosion and loose fittings, and verify that the SIM data plan and APN settings are still valid. Keep firmware at a tested revision and back up the configuration after every change so a replacement unit can be restored quickly.

Applications in Oman and the GCC

The Winsonic NE24001-104313 industrial 5G router suits remote wellhead and pipeline telemetry, water network pumping stations, solar and substation monitoring, and temporary construction or port sites where fixed fibre is not available. Dual operator support is especially useful in desert and mountain areas of Oman where coverage from a single carrier can be uneven.

Sourcing from Seven Star LLC

Seven Star LLC supplies the Winsonic NE24001-104313 industrial 5G router to system integrators and end users across Oman and the GCC, and can help you review antenna, power and network requirements before ordering so the unit arrives ready for your application.

Request a Quote for Winsonic NE24001-104313 Industrial 5G Router 4 Ports Cellular Routers / Gateways

For the Winsonic NE24001-104313, industrial 5G router or any related control and instrumentation requirement, contact the Seven Star LLC team. Submit a formal inquiry through our RFQ page with your network, interface and power requirements, and our specialists will respond with a detailed commercial proposal and the official Winsonic documentation.

Related Products

Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

About brand

Rail-grade Ethernet switches with M12 connectors, industrial cellular routers and panel PCs are the Winsonic products buyers ask us for most. Winsonic is known as a maker of industrial LCD monitors and touch displays, and the products listed here add networking and computing hardware for places where office equipment does not survive: trains and buses, roadside cabinets, pump stations and factory floors.

Seven Star LLC is the Winsonic agency for Oman and the GCC and lists Winsonic EN 50155 switches, 4G and 5G routers and gateways, SFP transceivers, panel PCs and rack mount monitors.

Winsonic product families

The M12 switches on this page are specified to EN 50155, the standard for electronic equipment on rail vehicles. Listed models include the L2 managed NE10002 and the NE10003 in IP68 housings, the unmanaged NE10004 with 10G ports and IP65 sealing, the unmanaged NE10005 and the 5-port IP68 NE10006, with PoE+ or PoE++ ports depending on the model. On the cellular side the listing covers NE24 series industrial cellular routers and edge gateways, the NE20001 vehicle-grade 5G transit gateway and the NE31001 outdoor LTE-A router. WSFP Gigabit SFP transceivers provide the fiber uplinks. Computing and display products include the PZB zero bezel panel PC and the RM rack mount monitor, next to the flush mount and zero bezel LCD monitors Winsonic builds for industrial use.

Where Winsonic equipment is used

Typical uses are on-board networks for trains, metro cars and buses, wayside cabinets, traffic management, remote pump stations and water plants, energy metering at unmanned sites, and machine monitoring and operator stations in factories.

Ordering Winsonic switches and routers: what we need

Send the complete part number, including the digits after the hyphen, because they separate variants of the same base model. Where you are still selecting, give us:

port count, port speed and connector type (M12 coding or RJ45)
PoE power needed per port and the supply voltage available
managed or unmanaged operation, and the IP rating required
for routers: mobile operator, SIM count, serial or Ethernet interfaces
for panel PCs: screen size, touch type, processor and mounting

Browse Winsonic products by category: Industrial Communications, Industrial Computer, Human Machine Interface (HMI) Displays.

Frequently Asked Questions

Which 5G modes does the NE24001-104313 support?

It supports 5G Sub-6 SA/NSA networks plus RedCap, with automatic fallback to LTE and WCDMA for continuous coverage across Gulf carrier networks.

How many Ethernet ports are available?

The router provides 1 WAN port and 4 LAN ports with 10/100/1000Mbps auto-negotiation, plus 1 USB 2.0 port for additional connectivity.

Does the router support redundant power?

Yes, it features dual DC power input terminals accepting 9–36VDC with reverse polarity, overvoltage, and overcurrent protection for redundant supply configurations.

What VPN protocols are supported?

The device supports PPTP, L2TP, IPsec, OpenVPN, GRE, GRETAP, and VxLAN tunnels for secure enterprise and site-to-site connectivity.

What is the MTBF of the router?

The NE24001-104313 is rated with an MTBF of 100,000 hours, operating from -35°C to +75°C in an IP30 full metal enclosure.

+968 90155212