- Industrial Communications
- AC Drives
- Vibration Monitoring
- PLC & I/O Cards
- Automation Accessories
- Controllers & Data Acquisition
- CCTV & Security
- Encoders
- Industrial Computers
- Safety Switches & Guard Locking
- HMI Displays
- Motor Soft Starters
- Isolator & Barrier
- Pneumatic Cylinders
- Servo Drives
- Automation Software
- Robotics
- Machine Vision
Brand
Meinberg
Substations, telecom nodes and data centers need every device to agree on the time, and Meinberg time servers are a common way to do it. Meinberg Funkuhren, founded in 1979 in Bad Pyrmont, Germany, builds NTP and PTP time servers, GNSS receivers and signal distribution equipment. Seven Star LLC sources and supplies Meinberg LANTIME time servers for utilities and networks in Oman, including the M1000 and M320 listed here.
Read the full brand profile- 5 products
- 1 category
Brand profile
About Meinberg
- Founded
- 1979
- Headquarters
- Bad Pyrmont, Germany
- Speciality
- Time and frequency synchronization systems
- Listed with us
- 5 products
Meinberg products by category
Substations, telecom nodes and data centers need every device to agree on the time, and Meinberg time servers are a common way to do it. Meinberg Funkuhren, founded in 1979 in Bad Pyrmont, Germany, builds NTP and PTP time servers, GNSS receivers and signal distribution equipment. Seven Star LLC sources and supplies Meinberg LANTIME time servers for utilities and networks in Oman, including the M1000 and M320 listed here.
Meinberg LANTIME models listed here
The LANTIME M320 is a 1U rackmount NTP time server. It works as a stratum 1 source with its own reference receiver, and Meinberg offers it with GPS, combined GNSS, DCF77 (PZF), MSF and IRIG time code references. The LANTIME M1000 is a 1U platform on the modular IMS system, with slots for up to two reference clocks, two power supplies and hot-pluggable I/O modules, plus PTP (IEEE 1588) and IEC 61850 time synchronization.
Ordering a Meinberg time server: what we need
A Meinberg order code describes the build. In M320/GPS/AD10, GPS is the receiver and AD10 is the wide-range AC/DC power supply. Send the full code or serial number, the reference source, oscillator option, supply voltage, the outputs you need (PPS, 10 MHz, IRIG, extra LAN ports) and the antenna cable length. GCC utility projects often require redundant supplies.
Request a Quote for Meinberg Products
Looking for Meinberg parts not listed here, or pricing for a project? Send us the part numbers and quantities. Seven Star LLC sources genuine Meinberg products for customers across Oman and the GCC and replies with a formal quotation.
- Genuine OEM products
- Supply across Oman & the GCC
- Formal quotation from our sales team
Free, no-obligation quotation · takes about 1 minute
Other enquiries: [email protected] · WhatsApp
Frequently Asked Questions
What does AD10 mean in a Meinberg LANTIME order code?
AD10 identifies the power supply, not an expansion card. On the LANTIME M1000 Meinberg lists AD10 as the supply for 90 to 265 V AC or 90 to 250 V DC, with DC20 for 20 to 60 V DC. State your station voltage so the correct supply is quoted.
What is the difference between the LANTIME M320 and the M1000?
The M320 is a fixed-configuration 1U NTP server, ordered with one reference type and a set of options. The M1000 uses the IMS modular system: reference clocks, power supplies and I/O cards sit in slots, modules are hot-pluggable, and the unit can run two clocks and two supplies in redundant mode.
Does a Meinberg LANTIME support PTP as well as NTP?
The LANTIME M1000 accepts PTP (IEEE 1588-2008) modules, up to four according to Meinberg, alongside NTP, SNTP and IEC 61850 time synchronization via SNTP. The M320 is primarily an NTP and SNTP server. Tell us which protocol your relays, RTUs or network equipment expect and we check the matching configuration.
Is Seven Star LLC a distributor of Meinberg?
No. Seven Star LLC is an independent industrial supplier based in Muscat. We source Meinberg time servers and accessories through commercial channels, check the model or order code against the manufacturer's documentation before quoting, and provide the manufacturer's datasheet and the certificates the manufacturer issues with the order on request.