- Automation & ControlView all 2,466 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- CCTV & Security
- Motor Soft Starters
- Encoders
- Safety Switches & Guard Locking
- HMI Displays
- Pneumatic Cylinders
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Schneider Electric
Schneider Electric EZ9S16492 4P 125 A Easy9 Switch Disconnector
Description
EZ9S16492: four-pole Easy9 switch disconnector for 125 A circuits
The EZ9S16492 is the 125 A top size of the four-pole Easy9 switch disconnector group. The datasheet describes it as an Easy9 switch disconnector, four poles, rated 125 A at 400 V, with a toggle operator that shows ON and OFF and a contact position indicator. It is a clip-on device for DIN rail and occupies 8 modules of 9 mm, which gives the 72 mm width in the table. Seven Star LLC supplies the EZ9S16492 in Oman and the GCC as an independent supplier based in Muscat.
A switch disconnector is not a protective device. It carries and makes load current and, with suitability for isolation marked Yes in the datasheet, it provides the isolation point that maintenance staff need, with a position indicator on the handle, before they touch a downstream board. Overload and short-circuit protection must come from the breaker or fuse upstream. At 125 A it is intended for the main isolator of a larger distribution board, the supply to a lighting and small power panel in a commercial building, or the isolation point ahead of several outgoing breakers.
Operating environment for the EZ9S16492 in Oman and the GCC
The datasheet states IP20 protection under IEC 60529, tropicalisation 2, an operating ambient of -5 to 55 °C and a storage range of -5 to 70 °C. IP20 means the device belongs inside an enclosure; it is not a field-mounted switch for a dusty or wet position.
In Muscat and the interior the limiting factor is usually the temperature inside the board in summer, not the outdoor figure. A cabinet in direct sun can pass the upper operating limit, so check the real internal temperature, and use ventilation or shading, before loading the EZ9S16492 close to its rated 125 A. Typical homes for the device are building distribution boards, utility rooms, workshop panels and small plant control cabinets.
Ratings of the EZ9S16492 and what the figures mean
The rated operational current is 125 A at 400 V 50/60 Hz with a rated operational voltage of 400 V AC 50/60 Hz, in utilisation category AC-22A. The rated insulation voltage is 500 V AC 50/60 Hz and the impulse withstand is 4 kV.
For fault conditions the datasheet gives a short-circuit making capacity of 1.875 kA and a short-time withstand of 1.5 kA during 1 s. These are modest figures compared with a moulded-case breaker, which is exactly why the switch disconnector has to sit behind a protective device that limits the fault current seen by the EZ9S16492.
Durability is quoted as 7000 cycles for the mechanism and 1000 cycles under electrical load. The datasheet quotes lower endurance for this size, 7000 mechanical and 1000 electrical cycles against 8500 and 1500 for the smaller ones, so it suits a main isolator that is operated rarely rather than a switch used many times a day.
EZ9S16492 technical specifications
| Parameter | Specification |
|---|---|
| Manufacturer / part number | Schneider Electric / EZ9S16492 |
| Description | Easy9 switch disconnector – 4P – 125 A – 400 V |
| Range | Easy9 |
| Product type | Switch disconnector |
| Switch application | Distribution |
| Poles | 4P |
| Utilisation category | AC-22A |
| Suitability for isolation | Yes |
| Rated operational current [Ie] | 125 A at 400 V 50/60 Hz |
| Rated operational voltage [Ue] | 400 V AC 50/60 Hz |
| Rated short-circuit making capacity [Icm] | 1.875 kA |
| Rated short-time withstand current [Icw] | 1.5 kA during 1 s |
| Rated insulation voltage [Ui] | 500 V AC 50/60 Hz |
| Rated impulse withstand [Uimp] | 4 kV |
| Control type | Toggle |
| Local signalling | ON/OFF indication |
| Mounting mode / support | Clip-on / DIN rail |
| Width in 9 mm pitches | 8 |
| Dimensions | 81 mm (H) x 72 mm (W) x 66.5 mm (D) |
| Colour | Grey |
| Mechanical durability | 7000 cycles |
| Electrical durability | 1000 cycles |
| Terminals | Tunnel type terminal (top or bottom) 1 to 50 mm² rigid; Tunnel type terminal (top or bottom) 1 to 35 mm² flexible |
| Tightening torque | 3.5 N.m |
| Standards | IEC 60947-3 |
| Certification | CE |
| Degree of protection | IP20 conforming to IEC 60529 |
| Tropicalisation | 2 |
| Ambient temperature (operation) | -5 to 55 °C |
| Ambient temperature (storage) | -5 to 70 °C |
| Packed unit weight | 365.0 g |
| Warranty | months |
Information to send with an RFQ for the EZ9S16492
To prepare a quotation quickly, send the quantity, the application and the delivery location, plus the following details. If the switch is replacing an existing item, a photograph of the nameplate on the old device removes any doubt.
- Part number EZ9S16492 and quantity.
- System voltage and frequency at site, for example 400 V, 50 Hz.
- Cable type and size at the terminals.
- Board manufacturer, enclosure type and ambient conditions.
- Required delivery time and project name, if any.
Cabling, torque and mounting the EZ9S16492
Each pole has a tunnel-type terminal at the top and at the bottom. The datasheet lists 1 to 50 mm² for rigid conductor and 1 to 35 mm² for flexible conductor, with a tightening torque of 3.5 N.m. A torque screwdriver is worth using: aluminium or stranded copper can relax after a few thermal cycles, and a warm terminal on a four-pole isolator is a common cause of nuisance heating.
The body clips on to a DIN rail and is 81 mm high, 72 mm wide and 66.5 mm deep, with a packed unit weight of 365.0 g. Because the width is 8 modules, leave the same space in the enclosure layout as for a four-pole circuit breaker of that frame, and keep the switch where its handle is reachable once the door is open.
Ordering checklist for the EZ9S16492
- Design current of the downstream board, and whether 125 A at 400 V leaves a sensible margin.
- Cable size: conductors up to 50 mm² rigid or 35 mm² flexible fit the terminals.
- Upstream protection: the fault level at the board must stay within the making and short-time figures above, so state the prospective short-circuit current.
- Operating frequency: durability is 7000 mechanical cycles and 1000 electrical cycles.
- Enclosure space for 8 modules of 9 mm, and DIN rail availability.
- Whether it is for a new board or a replacement in an existing one.
Easy9 four-pole switch disconnector family around the EZ9S16492
The four references below come from the same Easy9 group and share the housing: 81 mm high, 72 mm wide, 66.5 mm deep, grey, DIN rail clip-on, IP20. They differ in current rating, fault ratings, terminal capacity and endurance. The EZ9S16492 is the 125 A line of the table.
| Part number | Rated current | Making capacity [Icm] | Short-time [Icw] | Rigid / flexible terminal (mm²) | Mechanical / electrical cycles |
|---|---|---|---|---|---|
| EZ9S16463 | 63 A | 0.945 kA | 0.756 kA during 1 s | 1 to 35 / 1 to 25 | 8500 / 1500 |
| EZ9S16480 | 80 A | 1.2 kA | 0.96 kA during 1 s | 1 to 50 / 1 to 35 | 8500 / 1500 |
| EZ9S16491 | 100 A | 1.5 kA | 1.2 kA during 1 s | 1 to 50 / 1 to 35 | 8500 / 1500 |
| EZ9S16492 | 125 A | 1.875 kA | 1.5 kA during 1 s | 1 to 50 / 1 to 35 | 7000 / 1000 |
Documents and quotation
A datasheet for this product is attached on this page. It lists the ratings and dimensions summarised above and is the document to check against your drawings and load calculations.
Send us the part number, quantity and application and we will confirm availability and a quotation. Seven Star LLC is an independent supplier in Muscat and is not affiliated with the manufacturer.
Other Models in the Se Easy9 4p Switch Range
Seven Star LLC supplies models from the Se Easy9 4p Switch range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.
| Model | Category | |
|---|---|---|
| Schneider Electric EZ9S16463 4P 63 A Easy9 Switch Disconnector | Switchgear, Enclosures & Distribution | View details |
| Schneider Electric EZ9S16480 4P 80 A Easy9 Switch Disconnector | Switchgear, Enclosures & Distribution | View details |
| Schneider Electric EZ9S16491 4P 100 A Easy9 Switch Disconnector | Switchgear, Enclosures & Distribution | View details |
| Schneider Electric EZ9S16492 4P 125 A Easy9 Switch Disconnector | Switchgear, Enclosures & Distribution | You are viewing this model |
Datasheets & Documents
- Datasheet Schneider Electric EZ9S16492 Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
Schneider Electric is the French group for energy management and industrial automation: low and medium voltage switchgear and circuit breakers, motor control, drives, PLCs, power monitoring, UPS systems and building management. Its history goes back to 1836, when the brothers Adolphe and Eugène Schneider took over the iron and steel works at Le Creusot in Burgundy. Over the 20th century the company left steel and heavy engineering and became an electrical group through acquisitions such as Merlin Gerin, Télémécanique, Square D and Modicon. Its head office is in Rueil-Malmaison near Paris, and its shares are listed on Euronext Paris.
Schneider Electric company profile
| Origins | 1836, Le Creusot, France: Adolphe and Eugène Schneider take over the Le Creusot foundry |
|---|---|
| Headquarters | Rueil-Malmaison (Paris region), France |
| Ownership | Public company listed on Euronext Paris |
| Key acquisitions | Télémécanique (1988), Square D (1991), Merlin Gerin (1992), Modicon (1997), APC (2007), Invensys (2014); majority owner of AVEVA software |
| Brand names still in use | Acti9, ComPacT and MasterPacT breakers, TeSys motor control, Altivar drives, Altistart soft starters, Modicon PLCs, Harmony control components, PowerLogic and Easergy protection and metering, APC UPS, EcoStruxure software platform |
| Product families | Low voltage distribution, medium voltage switchgear and protection relays, motor control and drives, PLCs and HMIs, power meters, UPS and cooling, enclosures, building automation and energy software |
Milestones
- 1836: The Schneider brothers acquire the Le Creusot works; the business grows in steel, locomotives and heavy engineering.
- 1975: First investment in Merlin Gerin, a French maker of electrical distribution equipment.
- 1988–1992: Télémécanique, Square D (USA) and Merlin Gerin join the group, making it an electrical specialist.
- 1997: Modicon, the company behind the first programmable logic controller, joins the group.
- 1999: The group takes the name Schneider Electric.
- 2007 and 2014: APC (UPS and data centre power) and Invensys (process automation) are acquired.
Choosing Schneider Electric breakers and motor control
Circuit breakers are chosen by current and breaking capacity. Acti9 miniature circuit breakers (iC60, C120) protect final circuits up to 125 A. ComPacT NSX molded case breakers cover about 16 to 630 A, and the letter after the frame size sets the breaking capacity: B, F, N, H, S, L from lowest to highest. MasterPacT air circuit breakers are used as main incomers on large switchboards. For motors, a TeSys contactor with an LRD overload relay or a GV2 motor circuit breaker suits direct starting, an Altistart soft starter reduces starting current, and an Altivar drive controls speed. The breaking capacity must always be at least the prospective short-circuit current at the point of installation.
Where Schneider Electric products are used
In Oman and the GCC, Schneider Electric equipment is found in main and sub-main switchboards of commercial and residential buildings, motor control centres in water, oil and gas and industrial plants, substations protected by Sepam and Easergy relays, data centres powered by Galaxy and APC UPS systems, and buildings controlled by EcoStruxure Building Operation.
APC by Schneider Electric: UPS and critical power
Since 2007, APC has been part of Schneider Electric and is now its product brand for uninterruptible power supplies, replacement batteries, battery packs, network management cards and rack power distribution. Our APC catalogue covers Smart-UPS line-interactive and on-line models, Easy UPS On-Line, the modular Symmetra LX, RM and PX ranges, Silcon three-phase systems and their spare part kits, and the RBC cartridges that keep them running. Schneider Electric breakers, drives and PLCs can be quoted together with APC UPS systems in one request.
Schneider Electric products we list
| Family | Examples |
|---|---|
| Circuit breakers | Acti9 iC60N, C120N, NSX100F, NSX250N, NSX630, EasyPact EZC, MasterPacT MTZ1, MasterPacT NW |
| Motor control | TeSys Deca LC1D, TeSys F, LRD overload relay, GV2ME08, Altistart 22, Altistart 480 |
| Drives | Altivar 12, Altivar 320, ATV340, Altivar Process 630, ATV930, Lexium 32 servo |
| PLCs, HMIs and relays | Modicon M221, M241, M580 BMEP582040, Zelio Logic, Magelis HMISTU655 |
| Protection, metering and power | Sepam series 20, Easergy P3U30, MiCOM P139, PM5560, iEM3255, Galaxy VS UPS |
Ordering Schneider Electric products: what we need
Send the commercial reference from the label (for example LC1D18M7 or ATV320U22N4C). For breakers, confirm the rated current, number of poles, breaking capacity and trip unit. For contactors, give the coil voltage. For drives, give the motor power and supply voltage. APC products are listed on their own brand page.
Facts checked against Schneider Electric's published company history, October 2026.
Browse Schneider Electric products by category: Circuit Breaker, Electrical & Power Modules, AC Drives, PLC & I/O Cards, Metering Systems, UPS and Batteries.
FAQ
Questions about the Schneider Electric EZ9S16492 4P 125 A Easy9 Switch
Answers from our engineering team on installation, compatibility and integration.
01What is the rated current of the EZ9S16492?
The datasheet gives 125 A at 400 V 50/60 Hz for this four-pole Easy9 switch disconnector at 400 V, 50/60 Hz, in utilisation category AC-22A.
02Does the EZ9S16492 provide isolation?
Yes, the datasheet lists suitability for isolation as Yes and shows an ON/OFF indication with a contact position indicator. It is a switch and does not trip on overload, so upstream protection is still needed.
03What cable sizes fit the EZ9S16492?
The tunnel terminals take 1 to 50 mm² rigid or 1 to 35 mm² flexible conductor, tightened at 3.5 N.m.
04How is the EZ9S16492 mounted and how wide is it?
It clips on to DIN rail and takes 8 modules of 9 mm, which is 72 mm wide, 81 mm high and 66.5 mm deep.
05What temperature range does the EZ9S16492 allow?
Operation is listed from -5 to 55 °C with storage from -5 to 70 °C. The protection degree is IP20, so it needs an enclosure.


















Reviews
There are no reviews yet.