Schneider Electric EZ9S16463 4P 63 A Easy9 Switch Disconnector

Description

EZ9S16463: four-pole Easy9 switch disconnector for 63 A circuits

The EZ9S16463 is the smallest of the four four-pole Easy9 switch disconnectors in this group. The datasheet describes it as an Easy9 switch disconnector, four poles, rated 63 A at 400 V, with a toggle operator that shows ON and OFF and a contact position indicator. It is a clip-on device for DIN rail and occupies 8 modules of 9 mm, which gives the 72 mm width in the table. Seven Star LLC supplies the EZ9S16463 in Oman and the GCC as an independent supplier based in Muscat.

A switch disconnector is not a protective device. It carries and makes load current and, with suitability for isolation marked Yes in the datasheet, it provides the isolation point that maintenance staff need, with a position indicator on the handle, before they touch a downstream board. Overload and short-circuit protection must come from the breaker or fuse upstream. This is the size for a sub-distribution board, a small workshop supply, a pump-house panel or a feeder to a building-services riser where the load stays well under 63 A.

Ordering checklist for the EZ9S16463

  • Design current of the downstream board, and whether 63 A at 400 V leaves a sensible margin.
  • Cable size: conductors up to 35 mm² rigid or 25 mm² flexible fit the terminals.
  • Upstream protection: the fault level at the board must stay within the making and short-time figures above, so state the prospective short-circuit current.
  • Operating frequency: durability is 8500 mechanical cycles and 1500 electrical cycles.
  • Enclosure space for 8 modules of 9 mm, and DIN rail availability.
  • Whether it is for a new board or a replacement in an existing one.

EZ9S16463 technical specifications

Parameter Specification
Manufacturer / part number Schneider Electric / EZ9S16463
Description Easy9 switch disconnector – 4P – 63 A – 400 V
Range Easy9
Product type Switch disconnector
Switch application Distribution
Poles 4P
Utilisation category AC-22A
Suitability for isolation Yes
Rated operational current [Ie] 63 A at 400 V 50/60 Hz
Rated operational voltage [Ue] 400 V AC 50/60 Hz
Rated short-circuit making capacity [Icm] 0.945 kA
Rated short-time withstand current [Icw] 0.756 kA during 1 s
Rated insulation voltage [Ui] 500 V AC 50/60 Hz
Rated impulse withstand [Uimp] 4 kV
Control type Toggle
Local signalling ON/OFF indication
Mounting mode / support Clip-on / DIN rail
Width in 9 mm pitches 8
Dimensions 81 mm (H) x 72 mm (W) x 66.5 mm (D)
Colour Grey
Mechanical durability 8500 cycles
Electrical durability 1500 cycles
Terminals Tunnel type terminal (top or bottom) 1 to 35 mm² rigid; Tunnel type terminal (top or bottom) 1 to 25 mm² flexible
Tightening torque 3.5 N.m
Standards IEC 60947-3
Certification CE
Degree of protection IP20 conforming to IEC 60529
Tropicalisation 2
Ambient temperature (operation) -5 to 55 °C
Ambient temperature (storage) -5 to 70 °C
Packed unit weight 319.000 g
Warranty months

Information to send with an RFQ for the EZ9S16463

To prepare a quotation quickly, send the quantity, the application and the delivery location, plus the following details. If the switch is replacing an existing item, a photograph of the nameplate on the old device removes any doubt.

  • Part number EZ9S16463 and quantity.
  • System voltage and frequency at site, for example 400 V, 50 Hz.
  • Cable type and size at the terminals.
  • Board manufacturer, enclosure type and ambient conditions.
  • Required delivery time and project name, if any.

Cabling, torque and mounting the EZ9S16463

Each pole has a tunnel-type terminal at the top and at the bottom. The datasheet lists 1 to 35 mm² for rigid conductor and 1 to 25 mm² for flexible conductor, with a tightening torque of 3.5 N.m. A torque screwdriver is worth using: aluminium or stranded copper can relax after a few thermal cycles, and a warm terminal on a four-pole isolator is a common cause of nuisance heating.

The body clips on to a DIN rail and is 81 mm high, 72 mm wide and 66.5 mm deep, with a packed unit weight of 319.000 g. Because the width is 8 modules, leave the same space in the enclosure layout as for a four-pole circuit breaker of that frame, and keep the switch where its handle is reachable once the door is open.

Ratings of the EZ9S16463 and what the figures mean

The rated operational current is 63 A at 400 V 50/60 Hz with a rated operational voltage of 400 V AC 50/60 Hz, in utilisation category AC-22A. The rated insulation voltage is 500 V AC 50/60 Hz and the impulse withstand is 4 kV.

For fault conditions the datasheet gives a short-circuit making capacity of 0.945 kA and a short-time withstand of 0.756 kA during 1 s. These are modest figures compared with a moulded-case breaker, which is exactly why the switch disconnector has to sit behind a protective device that limits the fault current seen by the EZ9S16463.

Durability is quoted as 8500 cycles for the mechanism and 1500 cycles under electrical load. Its terminals take 1 to 35 mm² rigid conductor, which is a step below the 50 mm² of the larger siblings, so a heavy cable chosen for voltage-drop reasons may not fit and needs a lug or a different device.

Easy9 four-pole switch disconnector family around the EZ9S16463

The four references below come from the same Easy9 group and share the housing: 81 mm high, 72 mm wide, 66.5 mm deep, grey, DIN rail clip-on, IP20. They differ in current rating, fault ratings, terminal capacity and endurance. The EZ9S16463 is the 63 A line of the table.

Part number Rated current Making capacity [Icm] Short-time [Icw] Rigid / flexible terminal (mm²) Mechanical / electrical cycles
EZ9S16463 63 A 0.945 kA 0.756 kA during 1 s 1 to 35 / 1 to 25 8500 / 1500
EZ9S16480 80 A 1.2 kA 0.96 kA during 1 s 1 to 50 / 1 to 35 8500 / 1500
EZ9S16491 100 A 1.5 kA 1.2 kA during 1 s 1 to 50 / 1 to 35 8500 / 1500
EZ9S16492 125 A 1.875 kA 1.5 kA during 1 s 1 to 50 / 1 to 35 7000 / 1000

Operating environment for the EZ9S16463 in Oman and the GCC

The datasheet states IP20 protection under IEC 60529, tropicalisation 2, an operating ambient of -5 to 55 °C and a storage range of -5 to 70 °C. IP20 means the device belongs inside an enclosure; it is not a field-mounted switch for a dusty or wet position.

In Muscat and the interior the limiting factor is usually the temperature inside the board in summer, not the outdoor figure. A cabinet in direct sun can pass the upper operating limit, so check the real internal temperature, and use ventilation or shading, before loading the EZ9S16463 close to its rated 63 A. Typical homes for the device are building distribution boards, utility rooms, workshop panels and small plant control cabinets.

Documents and quotation

The manufacturer datasheet for this reference is attached on this page, so you can compare the figures quoted here with the original before you commit to a design or a purchase order.

To proceed, send the part number, the quantity and a few lines about the installation and we will reply with availability and a quotation. Seven Star LLC works as an independent supplier in Muscat with no affiliation to the manufacturer.

Other Models in the Se Easy9 4p Switch Range

Seven Star LLC supplies models from the Se Easy9 4p Switch range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
Schneider Electric EZ9S16463 4P 63 A Easy9 Switch DisconnectorSwitchgear, Enclosures & DistributionYou are viewing this model
Schneider Electric EZ9S16480 4P 80 A Easy9 Switch DisconnectorSwitchgear, Enclosures & DistributionView details
Schneider Electric EZ9S16491 4P 100 A Easy9 Switch DisconnectorSwitchgear, Enclosures & DistributionView details
Schneider Electric EZ9S16492 4P 125 A Easy9 Switch DisconnectorSwitchgear, Enclosures & DistributionView details
Datasheets & Documents
  • PDF Datasheet Schneider Electric EZ9S16463 Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Schneider Electric is the French group for energy management and industrial automation: low and medium voltage switchgear and circuit breakers, motor control, drives, PLCs, power monitoring, UPS systems and building management. Its history goes back to 1836, when the brothers Adolphe and Eugène Schneider took over the iron and steel works at Le Creusot in Burgundy. Over the 20th century the company left steel and heavy engineering and became an electrical group through acquisitions such as Merlin Gerin, Télémécanique, Square D and Modicon. Its head office is in Rueil-Malmaison near Paris, and its shares are listed on Euronext Paris.

Schneider Electric company profile

Origins 1836, Le Creusot, France: Adolphe and Eugène Schneider take over the Le Creusot foundry
Headquarters Rueil-Malmaison (Paris region), France
Ownership Public company listed on Euronext Paris
Key acquisitions Télémécanique (1988), Square D (1991), Merlin Gerin (1992), Modicon (1997), APC (2007), Invensys (2014); majority owner of AVEVA software
Brand names still in use Acti9, ComPacT and MasterPacT breakers, TeSys motor control, Altivar drives, Altistart soft starters, Modicon PLCs, Harmony control components, PowerLogic and Easergy protection and metering, APC UPS, EcoStruxure software platform
Product families Low voltage distribution, medium voltage switchgear and protection relays, motor control and drives, PLCs and HMIs, power meters, UPS and cooling, enclosures, building automation and energy software

Milestones

  • 1836: The Schneider brothers acquire the Le Creusot works; the business grows in steel, locomotives and heavy engineering.
  • 1975: First investment in Merlin Gerin, a French maker of electrical distribution equipment.
  • 1988–1992: Télémécanique, Square D (USA) and Merlin Gerin join the group, making it an electrical specialist.
  • 1997: Modicon, the company behind the first programmable logic controller, joins the group.
  • 1999: The group takes the name Schneider Electric.
  • 2007 and 2014: APC (UPS and data centre power) and Invensys (process automation) are acquired.

Choosing Schneider Electric breakers and motor control

Circuit breakers are chosen by current and breaking capacity. Acti9 miniature circuit breakers (iC60, C120) protect final circuits up to 125 A. ComPacT NSX molded case breakers cover about 16 to 630 A, and the letter after the frame size sets the breaking capacity: B, F, N, H, S, L from lowest to highest. MasterPacT air circuit breakers are used as main incomers on large switchboards. For motors, a TeSys contactor with an LRD overload relay or a GV2 motor circuit breaker suits direct starting, an Altistart soft starter reduces starting current, and an Altivar drive controls speed. The breaking capacity must always be at least the prospective short-circuit current at the point of installation.

Where Schneider Electric products are used

In Oman and the GCC, Schneider Electric equipment is found in main and sub-main switchboards of commercial and residential buildings, motor control centres in water, oil and gas and industrial plants, substations protected by Sepam and Easergy relays, data centres powered by Galaxy and APC UPS systems, and buildings controlled by EcoStruxure Building Operation.

APC by Schneider Electric: UPS and critical power

Since 2007, APC has been part of Schneider Electric and is now its product brand for uninterruptible power supplies, replacement batteries, battery packs, network management cards and rack power distribution. Our APC catalogue covers Smart-UPS line-interactive and on-line models, Easy UPS On-Line, the modular Symmetra LX, RM and PX ranges, Silcon three-phase systems and their spare part kits, and the RBC cartridges that keep them running. Schneider Electric breakers, drives and PLCs can be quoted together with APC UPS systems in one request.

Schneider Electric products we list

Family Examples
Circuit breakers Acti9 iC60N, C120N, NSX100F, NSX250N, NSX630, EasyPact EZC, MasterPacT MTZ1, MasterPacT NW
Motor control TeSys Deca LC1D, TeSys F, LRD overload relay, GV2ME08, Altistart 22, Altistart 480
Drives Altivar 12, Altivar 320, ATV340, Altivar Process 630, ATV930, Lexium 32 servo
PLCs, HMIs and relays Modicon M221, M241, M580 BMEP582040, Zelio Logic, Magelis HMISTU655
Protection, metering and power Sepam series 20, Easergy P3U30, MiCOM P139, PM5560, iEM3255, Galaxy VS UPS

Ordering Schneider Electric products: what we need

Send the commercial reference from the label (for example LC1D18M7 or ATV320U22N4C). For breakers, confirm the rated current, number of poles, breaking capacity and trip unit. For contactors, give the coil voltage. For drives, give the motor power and supply voltage. APC products are listed on their own brand page.

Facts checked against Schneider Electric's published company history, October 2026.

FAQ

Questions about the Schneider Electric EZ9S16463 4P 63 A Easy9 Switch

Answers from our engineering team on installation, compatibility and integration.

01What is the rated current of the EZ9S16463?
The datasheet gives 63 A at 400 V 50/60 Hz for this four-pole Easy9 switch disconnector at 400 V, 50/60 Hz, in utilisation category AC-22A.
02Does the EZ9S16463 provide isolation?
Yes, the datasheet lists suitability for isolation as Yes and shows an ON/OFF indication with a contact position indicator. It is a switch and does not trip on overload, so upstream protection is still needed.
03What cable sizes fit the EZ9S16463?
The tunnel terminals take 1 to 35 mm² rigid or 1 to 25 mm² flexible conductor, tightened at 3.5 N.m.
04How is the EZ9S16463 mounted and how wide is it?
It clips on to DIN rail and takes 8 modules of 9 mm, which is 72 mm wide, 81 mm high and 66.5 mm deep.
05What temperature range does the EZ9S16463 allow?
Operation is listed from -5 to 55 °C with storage from -5 to 70 °C. The protection degree is IP20, so it needs an enclosure.