- Automation & ControlView all 2,473 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- CCTV & Security
- Motor Soft Starters
- Encoders
- Safety Switches & Guard Locking
- HMI Displays
- Pneumatic Cylinders
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: ifm
ifm IG5593 Inductive Sensor M18, 5 mm, 2-Wire, Cable
Description
ifm IG5593 Inductive Sensor M18, 5 mm, 2-Wire, Cable
The ifm IG5593 is a two-wire inductive sensor in an M18 x 1 housing, 80 mm long, with a sensing range of 5 mm for flush mounting. It runs from 10 to 55 V DC, carries up to 400 mA and switches at 700 Hz. The output function, normally open or normally closed, is selectable, and the sensor suits the wide supply range found in machines with 12, 24 or 48 V supplies.
The housing is orange PBT with an IP67 rating, the ambient range is -25 to 80 degrees Celsius, and a 2 m PUR/PVC cable (2 x 0.5 mm2) is fitted. Seven Star LLC supplies the IG5593 in Oman and the GCC as an independent supplier.
IG5593 technical specifications
The table lists the values published by the manufacturer for the IG5593. Where a parameter has several operating modes, the headline value is shown; the full parameter list is in the manufacturer documentation.
| Parameter | Specification |
|---|---|
| Manufacturer / part number | ifm electronic / IG5593 |
| Sensing range [mm] | 5 |
| Thread designation | M18 x 1 |
| Dimensions [mm] | M18 x 1 / L = 80 |
| Mounting | flush mountable |
| Real sensing range Sr [mm] | 5 ± 10 % |
| Operating distance [mm] | 0 to 4.05 |
| Hysteresis [% of Sr] | 1 to 15 |
| Operating voltage [V] | 10 to 55 DC |
| Electrical design | PNP/NPN |
| Output function | normally open / normally closed (selectable) |
| Permanent current rating of switching output DC [mA] | 400 |
| Switching frequency DC [Hz] | 700 |
| Ambient temperature [°C] | -25 to 80 |
| Protection | IP 67 |
| Weight [g] | 110.8 |
| Materials | housing: PBT orange; lock nuts: PA 6.6 black |
| Cable | 2 m, PUR / PVC; 2 x 0.5 mm² |
| MTTF [years] | 1835 |
How the IG5593 works
An inductive proximity sensor such as the IG5593 generates a high-frequency magnetic field at its sensing face. When a metal target enters the field, eddy currents damp the oscillation, and the electronics switch the output. The real sensing range is stated for a standard steel target; other metals are detected at a shorter distance according to the correction factors in the table. No contact is made with the target, so there is no wear and the sensor is unaffected by dirt, oil or moisture on the target.
Where the IG5593 fits and related parts
Within this family the IG5593 is the two-wire plastic-body unit in M18, an upgrade path for systems that still use two-wire connection like a switch. The IGS232 is an M18 brass three-wire sensor with 8 mm range, while the IFS204, IFT203 and IIS204 cover M12 and M30, and the IE5352 is a short M8.
Selection and ordering checklist for the IG5593
Work through the points below before you confirm the order, so that the IG5593 you receive is the one your machine or plant needs.
- Check the wiring: two-wire, series load, minimum load current 4 mA, leakage current 0.8 mA
- Check the supply 10 to 55 V DC and load up to 400 mA
- Check target: correction factor for steel 1, stainless 0.7, brass 0.4
- Plastic body PBT in M18, flush mountable
- Check cable length: 2 m, PUR/PVC
The manufacturer lists this article under the type designation Inductive sensor, IG-2005-FRKG/PH. The article number IG5593 is the reference to quote when ordering, and the type designation is useful for technicians who compare the label on an installed unit.
Installation, commissioning and maintenance
Screw the sensor into a bracket or tapped hole, locking it with the two supplied nuts within the stated torque. Flush or non-flush mounting decides how much free metal-free space is needed around the sensing face, so follow the mounting entry in the table. Align the target path with the sensing axis and set the working distance with margin below the stated operating distance, to allow for temperature drift. In commissioning, check the LED while moving the target through the range. Inspect the sensing face for impact and the cable or connector for damage.
In two-wire operation the load must draw at least 4 mA to keep the sensor working, and the residual current of 0.8 mA in the off state may hold sensitive inputs on, so check the input type. Use the supplied lock nuts without over-tightening the plastic body. Keep the working distance below the 4.05 mm operating distance.
Typical applications in Oman and the GCC
Machine position and end-of-travel detection, cylinder and gate position, counting of metal parts. In Oman and the GCC it is used in retrofits where two-wire inputs and varied supply voltages exist.
Inductive sensors are among the most robust parts on a machine, but heat, vibration and repeated impacts still end their life. Choose the housing material and range to suit the environment, and keep spares of the common thread sizes.
IG5593 compared with related ifm types
The table places the IG5593 next to neighbouring types in the same application group, so you can see whether a sibling would suit the job better.
| Part number | Key characteristics | Note |
|---|---|---|
| IG5593 | M18 flush, 5 mm, 2-wire, 10-55 V DC, cable | This page |
| IFS204 | M12 flush, 4 mm, brass, plug | Related type |
| IFT203 | M12 flush, 4 mm, stainless, IP69K | Related type |
| IGS232 | M18 flush, 8 mm, -40 to 85 C, IP69K | Related type |
| IIS204 | M30 flush, 15 mm, brass | Related type |
| IE5352 | M8 non-flush, 5 mm, 0.3 m cable + M12 | Related type |
Information to send with an RFQ for the IG5593
To prepare an accurate offer for the IG5593, please include the following with your enquiry:
- Thread size and body length required
- Sensing range and the target material
- Flush or non-flush mounting
- Output wiring and connector or cable length
- Quantity and delivery location
Documents and quotation
No datasheet is attached to this page. Send us the part number IG5593 and we will confirm which documents are available, such as the datasheet and operating instructions, and for IO-Link devices the device description file.
Seven Star LLC is an independent supplier in Muscat serving Oman and the GCC and is not affiliated with the manufacturer; the name ifm is used only to identify the product. Prices are not shown on the page, so send the part number, the quantity and the delivery location to receive a quotation.
Datasheets & Documents
- Datasheet ifm IG5593 Inductive Sensor Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
ifm is a German family-owned maker of sensors and automation products, founded in Essen in October 1969 by Robert Buck and Gerd Marhofer. Its first products were inductive proximity sensors sold under the efector name. ifm is still headquartered in Essen, and the founders' sons, Martin Buck and Michael Marhofer, have led it since 2001.
Seven Star LLC lists ifm position, distance and pressure sensors and supplies them by exact article number to plants and machine builders in Oman and the wider Gulf region.
ifm company profile
| Founded | 1969, Essen, Germany |
|---|---|
| Founders | Robert Buck and Gerd Marhofer |
| Headquarters | Essen, Germany |
| Ownership | Family-owned |
| Product families | Inductive and capacitive proximity sensors, PN pressure sensors, O1D laser distance sensors, flow and level sensors, IO-Link masters |
Milestones
- 1969: ifm is founded in Essen.
- 2001: The founders' sons take over management.
ifm sensors listed on this page
ifm identifies every device with a short article number, and that number is what we order against. Three are listed here:
- O1D100: laser distance sensor for position and distance measurement
- PN7093: pressure sensor with local display
- NG5021: inductive proximity sensor with NAMUR output
Other ifm inductive sensors, pressure sensors and connection cables can be quoted on request when you send the article number.
ifm products we list
Ordering ifm sensors: what we need
Send the six-character article number printed on the housing (two letters and four digits, or similar). If the label is worn, a photo plus the thread size, sensing range, output type and connector style is enough for us to check the part against ifm documentation. For NAMUR sensors, tell us which isolating amplifier is in the loop. Buyers in the GCC who need a successor for a discontinued article can send the old number and we will check the replacement the manufacturer names.
Facts checked against ifm's own 50-year chronicle (ifm.com), October 2026.
Browse ifm products by category: Sensors & Transmitters, Pressure Instrumentation.
FAQ
Questions about the ifm IG5593 Inductive Sensor M18, 5 mm, 2-Wire, Cable
Answers from our engineering team on installation, compatibility and integration.
01What is the sensing range of the ifm IG5593?
5 mm, with an operating distance of 0 to 4.05 mm.
02Is the IG5593 a two-wire sensor?
Yes, it uses two-wire technology. This is the value published by the manufacturer for the IG5593; confirm details before ordering.
03What supply does the IG5593 need?
10 to 55 V DC. This is the value published by the manufacturer for the IG5593; confirm details before ordering.
04What is the housing of the IG5593?
M18 x 1 thread, 80 mm long, PBT housing, flush mountable.
05What is the switching frequency of the IG5593?
700 Hz. This is the value published by the manufacturer for the IG5593; confirm details before ordering.


















Reviews
There are no reviews yet.