Brand:

CCS 646GZE-7011 Series Explosion-Proof Dual-Snap Pressure Switch

Description

Overview

The CCS 646GZE-7011 Series from Custom Control Sensors is a rugged, heavy-duty gage pressure switch built for hazardous locations. It combines a 316 stainless steel pressure port and a 316 stainless steel diaphragm with the company’s Dual-Snap® Belleville disc spring, so the wetted path tolerates corrosive media and wet conditions while the sensing element stays stable under vibration and shock. CCS describes the series as similar in design to its 604 Series, but packaged with a UL/CSA explosion-proof, hermetically sealed electrical assembly for Class I, Groups A, B, C and D and Class II, Groups E, F and G areas. A single set point is adjustable in the field across eight ranges that together span roughly 0.4 to 5000 psig.

Seven Star LLC supplies the CCS 646GZE-7011 and its DPDT variant, the 646GZEM-7011, to oil and gas operators, power stations, desalination plants and process contractors across the Sultanate of Oman and the GCC. Our Muscat team checks the required set point, the reset direction, system and proof pressure, wiring and certification needs against the CCS ordering data before an order is placed, and we provide engineering support in Muscat for replacement switches for shutdown and alarm loops, with lead time confirmed at quotation.

Operating Principle of the CCS 646GZE-7011

In the CCS 646GZE-7011, process pressure acts on the stainless steel diaphragm, which transfers the force to a Dual-Snap disc spring. The disc is a preloaded Belleville washer that resists movement until the force on it reaches the calibrated level, at which point it snaps over centre in a single, fast motion and operates the snap-action switch element. Because the disc only moves when the set point is reached, the switch has no creeping contact pressure, and CCS lists repeatable and stable set points, high cycle life and high over-pressure capability as direct consequences of this principle, which the company first developed for aerospace hardware.

When pressure falls, the disc snaps back at a lower value, and the difference between the two trip points is the approximate dead band shown in the datasheet. On the CCS 646GZE-7011 the dead band grows with the range, from about 1 psi on the 1.4 to 16 psig range to about 480 psi on the 3200 to 5000 psig range. The set point is adjusted internally: the installer opens the access cover and turns the adjustment wheel clockwise to raise the setting or counter-clockwise to lower it, then closes the cover so the enclosure rating is restored. Each CCS 646GZE-7011 can also be supplied factory set to a specified value.

Engineering Design of the CCS 646GZE-7011

The CCS 646GZE-7011 is a mid-size, rigid instrument. The process connection is a 1/2 inch female NPT port in 316 stainless steel, with a 316 stainless steel diaphragm and a Viton O-ring as standard; that combination is what distinguishes the 7011 suffix from the 646GZE models with a polyimide diaphragm and from the 646GE models with an aluminium port. The housing enclosure is aluminium with a 1/2 inch male NPT electrical connection, a mounting bracket and a stainless steel or Mylar tag. Shipping weight is about 1.7 kg (60 ounces), and CCS warns that the electrical hex must not be used for torquing during installation.

The electrical assembly of the CCS 646GZE-7011 is a separate, hermetically sealed and explosion-proof module, CCS part number 17-51 for SPDT units and 17-73 for the M (DPDT) option, listed by UL (file E32961) and CSA (file LR22921). A Y option adds a Baseefa ATEX certified electrical assembly marked II 2 GD Ex d IIC, Ex tb IIIC, and an X option supplies a double-break electrical assembly. Standard credentials include CE marking, CCC, CRN, Dual Seal to ANSI/ISA-12.27.01, NACE MR0175 / ISO 15156, NEMA 4, 7, 9 and 13 and IP66. Operating temperature is -40 to 86 °C (-40 to 186 °F), with limits that depend on the O-ring selected.

Key Features

The CCS 646GZE-7011 brings the following engineering advantages to safety and alarm duties:

  • Dual-Snap Belleville disc spring sensing gives repeatable and stable set points with strong resistance to vibration and shock.
  • A 316 stainless steel port and diaphragm suit corrosive media, sour service under NACE MR0175 and wet installations.
  • Eight adjustable set point ranges cover approximately 0.4 to 5000 psig (0.03 to 345 bar) in a single housing family.
  • System pressure of 3000 psig and proof pressure of 5000 psig apply to the mid ranges, rising to 5000 and 7500 psig on the two highest ranges.
  • The standard SPDT element is rated 15 A at 125, 250 and 480 VAC, while the 646GZEM-7011 provides DPDT contacts rated 5 A at 125 and 250 VAC.
  • The hermetically sealed electrical assembly is UL/CSA explosion proof, with an ATEX certified version available through the Y option.
  • Internal set point adjustment through an access cover allows convenient calibration in the field without removing the switch.
  • Modified suffixes add gold contacts, manual reset after increasing pressure, free leads and other variants for special loops.

Industrial Applications

CCS lists oil and gas, power generation, fluid management, chemical refining and processing, manufacturing, utilities, water and wastewater treatment and safety systems as target markets. In Oman that translates into high and low pressure trips on wellhead control panels, compressor and pump discharge protection at gas plants in the interior, lube oil and seal oil alarms on turbines at independent power plants, and pressure permissives on chemical injection skids. The 1/2 inch NPT stainless port and NACE compliance make the CCS 646GZE-7011 a practical choice where the process contains hydrogen sulphide or produced water.

Desalination and water utilities along the Batinah coast use the CCS 646GZE-7011 to protect high-pressure RO feed pumps, where the 330 to 1000 psig and 950 to 2300 psig ranges sit comfortably around membrane feed pressures, while refineries and petrochemical units in Sohar and Duqm specify the DPDT 646GZEM-7011 when one contact drives the shutdown system and the other feeds an alarm annunciator. Seven Star LLC supplies the CCS 646GZE-7011 together with related pressure instruments such as the CCS 646DZE explosion-proof differential pressure switch, the United Electric One Series 1XSWLL pressure switch and the WIKA 990.27 diaphragm seal for viscous or crystallising media.

Ordering Notes and Model Structure

The part number of the CCS 646GZE-7011 is built in three steps defined by the CCS datasheet: choose the series and range, add any option letters, then add the standard suffix. The range digit follows the series letters, so 646GZE11-7011 is the 20 to 150 psig version with an SPDT element, and 646GZEM2-7011 is the 10 to 75 psig version with the M (DPDT) electrical option. Option letters include A (Viton O-ring, standard on GZE models), C (316 stainless steel welded capsule, not available on ranges 9 and 10), F (ethylene propylene O-ring), M (DPDT), X (double break) and Y (ATEX). Optional suffixes for the CCS 646GZE-7011 include 7008 gold contacts, 7023 manual reset after increasing pressure, 7054 two-metre free leads and 7076 18 inch Teflon free leads for low temperature wiring.

Technical Specifications

The table below summarises the CCS 646GZE-7011 Series data published in the CCS 646G*E* datasheet and on the CCS product pages:

Parameter Specification
Model CCS 646GZE*-7011 Series (SPDT); 646GZEM*-7011 (DPDT, M option)
Type Adjustable gage pressure switch for hazardous areas, Dual-Snap disc spring
Wetted parts 1/2"-14 NPT 316 stainless steel port and diaphragm, Viton O-ring
Range 1 (646GZE1-7011) Increasing 1.4–16 psig, decreasing 0.4–15 psig, dead band approx. 1 psi; system 500 / proof 750 psig
Ranges 2, 11, 3, 5, 7 10–75, 20–150, 50–375, 330–1000, 950–2300 psig increasing; system 3000 / proof 5000 psig
Ranges 9 and 10 2100–3400 and 3200–5000 psig increasing; system 5000 / proof 7500 psig
Electrical rating SPDT 15 A at 125/250/480 VAC; 2 A at 28 VDC; 0.5 A at 125 VDC; 0.2 A at 250 VDC
Electrical rating DPDT (M) 5 A at 125/250 VAC; 5 A at 28 VDC; 0.5 A at 125 VDC
Electrical connection 1/2" male NPT, hermetically sealed assembly P/N 17-51 (17-73 for M)
Enclosure Aluminium housing; NEMA 4, 7, 9, 13; IP66
Hazardous area UL/CSA explosion proof Class I Groups A–D, Class II Groups E–G; ATEX II 2 GD Ex d IIC, Ex tb IIIC (Y option)
Other approvals CE, CCC, CRN, Dual Seal ANSI/ISA-12.27.01, NACE MR0175 / ISO 15156
Operating temperature -40 to 86 °C (-40 to 186 °F), depending on O-ring
Weight Approx. 1.7 kg (60 oz) shipping weight

How to Order

To specify the CCS 646GZE-7011 for a new project or replace an installed switch, send Seven Star LLC your required range, set point and reset direction, SPDT or DPDT contacts, certification and tagging requirements, together with the nameplate data of any existing unit. Our instrumentation team in Muscat will confirm the complete CCS part number against the datasheet, advise on manifolds and junction boxes, and prepare a formal quotation with lead time confirmed. The CCS datasheet can be downloaded from this page, and engineers across Oman and the GCC can contact our instrumentation division directly for technical support.

Datasheets & Documents
  • PDF Datasheet CCS 646G*E* Hazardous Areas Adjustable Pressure Switch Datasheet (Form 830G) Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

CCS (Custom Control Sensors) is an American maker of pressure, vacuum, differential pressure and temperature switches with roots in the late 1950s. Its founder began by designing switches for the United States Air Force. CCS is known for its patented Dual-Snap disc spring design, and its switches are used in aerospace, oil and gas, and industrial plants.

Seven Star LLC lists CCS pressure switches and differential pressure switches in explosion-proof housings and supplies them to plants in Oman, with each part number checked against the manufacturer's documentation before an offer is made.

CCS company profile

Origins Late 1950s, California
Base Chatsworth, California
Technology Dual-Snap disc spring switches
Industries Aerospace, oil and gas, industrial
Product families 604 series pressure and vacuum switches, 646 series explosion-proof pressure switches, 646DZE differential pressure switches, temperature switches

CCS pressure switch models listed here

Two members of the 646 line are on this page: the 646GZE-7011 explosion-proof Dual-Snap pressure switch and the 646DZE adjustable differential pressure switch, also explosion-proof. The letters and digits that follow 646 are not decoration. They fix the sensing type, the pressure port, the wetted material, the electrical rating and the adjustable span, so two CCS switches that look alike from the outside can have very different set point limits.

CCS products we list

Family Examples
Pressure Instrumentation 604GZ2-7011 Pressure Switch, 604V1 Vacuum Switch, 646DZE Adjustable Differential Pressure…, 646GZE-7011 Series Explosion-Proof Dual-…

Ordering a CCS switch: what we need

Send the complete part number from the nameplate with every suffix, plus the set point, whether the contact must act on rising or falling pressure, the process fluid and the area classification of the location. A nameplate photo is the quickest way to avoid a wrong match. For projects elsewhere in the GCC, tell us which approval marking the site specification calls for and we will compare it with the CCS datasheet before quoting.

Facts checked against CCS's own company pages (ccsdualsnap.com), October 2026.

FAQ

Questions about the CCS 646GZE-7011 Series Explosion-Proof Dual-Snap

Answers from our engineering team on installation, compatibility and integration.

01What does the -7011 suffix mean on the CCS 646GZE-7011?
On the CCS 646GZE series the -7011 suffix identifies the version with a 316 stainless steel pressure port and a 316 stainless steel diaphragm with a Viton O-ring, instead of the polyimide diaphragm used on the basic 646GZE models. It also extends the available ranges up to 5000 psig with a 7500 psig proof rating.
02What is the difference between the 646GZE-7011 and the 646GZEM-7011?
Both share the same stainless wetted parts, ranges and explosion-proof housing. The 646GZE-7011 uses an SPDT switch element rated 15 A at up to 480 VAC, while the 646GZEM-7011 carries the M option with DPDT contacts rated 5 A at 125 or 250 VAC, which is useful when one contact drives a trip and the other an alarm.
03Can the set point of the CCS 646GZE-7011 be changed on site?
Yes. The set point is internally adjustable: open the access cover and turn the adjustment wheel clockwise to increase or counter-clockwise to decrease the setting within the selected range. Switches can also be ordered factory set, and Seven Star LLC can arrange presetting to the value stated on your instrument datasheet.
04Is the CCS 646GZE-7011 suitable for sour gas service in Oman?
The 646G*E* datasheet lists NACE MR0175 / ISO 15156 among the standard features, and the 7011 version has a 316 stainless steel port and diaphragm. Final material suitability still depends on the H2S partial pressure, chlorides and temperature of the specific service, which our engineers review with you before ordering.
05Does Seven Star LLC supply CCS pressure switches in Oman and the GCC?
Yes. Seven Star LLC supplies CCS 646 Series pressure switches, including the 646GZE-7011 and 646GZEM-7011, to customers in Oman and across the GCC, with engineering support in Muscat for model selection, presetting and replacement of installed units.