Camfil Megalam ProSafe MX14-2G10-610x610x90-1PU H14 HEPA Panel

A HEPA/ULPA panel for pharma, food and beverage cleanrooms

The Camfil Megalam ProSafe MX14-2G10-610x610x90-1PU is a 610 x 610 x 90 mm H14 HEPA panel with an extruded anodised aluminium frame, glass fibre media, a seamless polyurethane foamed gasket and painted expanded-metal grilles. Camfil describes it as a HEPA/ULPA filter for cleanrooms and laminar air flow benches, certified Prosafe for the pharma, food and beverage industries.

In the type table the MX line is the 90 mm deep construction, alongside MD at 66 mm and MG at 110 mm. The panel carries 605 m3/h at 95 Pa initial resistance with 13.2 m2 of media and weighs 6.5 kg.

What the datasheet claims for ProSafe

• Tested for food safety according to EC 1935:2004; hygienic product according to VDI 6022 and ISO 846.
• Free of bisphenol-A, phthalates and formaldehyde.
• Manufactured and packed in a controlled environment; microbial inert components according to ISO 846.
• Chemically resistant to decontamination and cleaning agents.
• 100% filter scan tested according to ISO 29463 with an individual protocol; packed in PE film.

Technical specification

MD, MX or MG depth

At the same face size and airflow, the MX uses about 32 percent less initial resistance than the MD (95 against 140 Pa, derived) and has a final pressure drop limit of 600 Pa against 500 Pa for the MD. The MG goes lower again at 65 Pa and takes 800 Pa as its final limit.

Selection and size range

The MX series is printed for sizes from 305 x 305 x 90 mm (151 m3/h, 110 Pa) to 1220 x 610 x 90 mm (1,206 m3/h, 95 Pa). H14 and U15 grades exist; this page covers the H14 610 x 610 size. Choose the 610 x 610 for standard ceiling grid modules and the correct duct or housing for terminal HEPA installations.

The recommended final pressure drop of two times initial equals 190 Pa (derived), well within the 600 Pa maximum for MX.

Specification points for pharma and food areas

The datasheet calls out the Prosafe certification, the food contact test to EC 1935:2004 and the chemical resistance to decontamination and cleaning agents. These are useful for tender checklists: attach the datasheet to the submittal and ask for the individual test protocol for each filter.

The grille finish, RAL 9016 painted expanded metal, is cleanable, but check the compatibility of your specific cleaning agent with the manufacturer before routine use.

MX panels printed in the data sheet

The type code reads class (MX14, H14), a media code (2G10 as printed), face size, depth and a gasket code (1PU). Keep the full string. The 610 x 610 size has the best resistance in the MX table, at 95 Pa, together with the 610 x 1220 panel.

Installation and handling

The glass fibre media is delicate: handle the panel by the frame only and keep it in its PE film until installation. Confirm that the gasket arrangement (1PU, polyurethane) suits the housing. Photos and data reflect the family; consult Camfil for the individual test protocol, which is delivered with each filter. See other filtration elements.

Fitting and replacement notes

The panel is installed in a cleanroom ceiling or housing with the gasket sealing against the frame, so check the frame dimensions, the grille side and the airflow direction before fitting. Cleanroom filters are normally tested after installation, so coordinate with the validation team, and keep the original packing until installation to avoid contamination.

Information needed for a quotation

Send the full filter code, the quantity, the housing or frame type it must fit, the delivery location in Oman or the GCC and any prefilters or accessories, so that the complete filter set can be quoted together.

Documents and supply information

The manufacturer data sheet is attached to this page and should be read together with the project specification before a purchase is confirmed. Filter class, airflow, pressure drop and dimensions are quoted as printed on that sheet. Lead time, stock position and certificates available with the shipment are confirmed in the quotation, and we supply to Oman and the wider GCC region for industrial, utility and building services projects.

Related Camfil products: Camfil Opakair OPE-0170-610x610x292-P0-2HH F8 Compact Filter, Camfil Absolute VGHF13-592x592x292-0P H13 HEPA Compact Filter, Camfil Airopac Traditional APE 0155 610x610x292-F0 F7 Box Filter, Camfil Hi-Cap CO60 G4 Coarse 60% Bag Prefilter 592x592x580-6, Camfil Cam-Flo ES ePM1 70% Bag Filter 592x592x640-6 and Camfil 30/30 ePM10 50% Panel Prefilter 595x595x95.