Enerdis TRIAD2 T304 – Programmable Multi-Output Transducer
Overview:
Flexible Digital Measurement Transducer
The Enerdis TRIAD2 T304 transducer is part of the TRIAD2 range — a family of programmable digital transducers designed to convert electrical measurements into configurable analogue outputs. This range supports flexible programming of measurement types, output signal characteristics, and accuracy classes, making it suitable for energy monitoring, automation, and instrumentation applications.
With up to four analogue outputs, the T304 model can be configured to deliver signals like ±20 mA or ±10 V based on the measured parameters selected during setup. Users typically configure the transducer using TRIADJUST 2 software, which allows setting input measurement types, output ranges, and accuracy class to match specific application requirements.
Core Technology & Features
Programmable Multi-Output: Delivers four analogue outputs that can be tailored for different electrical parameters (current, voltage, power, frequency, energy, etc.).
Flexible Measurement Configuration: Users can define the measured quantity (e.g., voltage, current, power, power factor) and map it to chosen outputs using programming tools.
Analogue Output Options: Includes current and voltage output types (e.g., ±20 mA, ±10 V) depending on model and programming.
TRIADJUST 2 Configuration Software: Enables full configuration of measurement and output parameters via optical interface, RS485, or Ethernet (with appropriate communication modules).
Programmable Accuracy: Adjustable accuracy classes improve signal precision based on application needs.
Panel or DIN-rail Mountable: Designed for integration into electrical panels and control systems.
This transducer offers flexible instrumentation capability, making it ideal for customizing measurement conversion and signal conditioning tasks in industrial automation and electrical monitoring frameworks.
Typical Applications
The Enerdis TRIAD2 T304 is used in applications such as:
Energy and power monitoring systems
Electrical network instrumentation
Industrial control and automation panels
Signal conversion for SCADA & PLC interfaces
Custom analogue output generation from digital measurements
Programmable transducers like the TRIAD2 are essential where multiple measurement outputs must be accurately converted to standard instrumentation signals for control and monitoring.
Request a Quote for Enerdis TRIAD2 T304 – Programmable Multi-Output Transducer
Configure multi-signal industrial measurement with the Enerdis TRIAD2 T304 Programmable Multi-Output Transducer — contact Seven Star LLC for configuration support, pricing, and availability.
Technical Overview
The Enerdis (Socomec) TRIAD2 series is a programmable, multi-output transducer for electrical panel and switchgear monitoring, designed to convert measured electrical parameters into standard analog and digital outputs for interfacing with SCADA, BMS, or PLC systems. Per the manufacturer’s official documentation for the TRIAD2 family (now published under the Chauvin Arnoux Energy brand following Enerdis’s brand transition), the transducer measures phase and line voltage (Vac/Uac), current (Iac), active power (P), reactive power (Q), apparent power (S), frequency (F), power factor/cos φ/tan φ, and phase angles, across single-phase, split-phase, and 3-wire/4-wire three-phase network configurations.
Input ranges support direct voltage measurement up to 480 V phase-to-phase, with primary voltage measurement up to 1 MV achievable via external voltage transformers, and current inputs of 1 A or 5 A nominal, extendable to primary currents up to 40,000 A via external current transformers. The TRIAD2 family provides up to 4 analog outputs, individually configurable as ±20 mA or ±10 V with a selectable transfer curve (linear, 2-slope, or quadratic) to match the receiving system’s input requirements. All configuration — including CT/VT ratios, wiring diagram selection, output scaling, and communications settings — is performed through Socomec’s TRIADJUST 2 configuration software, making the transducer field-reconfigurable without hardware changes.
Accuracy class is 0.1 per IEC 60688, with a response time as fast as 50 ms, isolation of 4 kV, and auxiliary power input of 80–265 Vac/Vdc across 50/60 Hz. Communications support Modbus RTU (via an optical head or RS-485 interface) and Modbus TCP over Ethernet, allowing integration into both legacy serial-based and modern Ethernet-based monitoring architectures. The unit is rated for indoor use at IP20, operating from −10°C to +55°C, CAT III 300V and pollution degree 2 per IEC 61010-1/61010-2-030, and mounts on standard 35mm DIN rail or via panel/screw mounting. Seven Star LLC notes that the specific "T304" ordering code on this listing was not independently matched to a named variant within the currently published Chauvin Arnoux Energy/Socomec TRIAD2 catalog during this review; the family-level specifications above are confirmed from official manufacturer documentation, but customers should confirm the exact output configuration (analog output count and type) for the T304 code specifically against Seven Star LLC’s supplier documentation before finalizing an order requiring a precise output-count match.
Applications
TRIAD2 transducers are used throughout electrical distribution systems — switchgear panels, substations, generator control panels, and industrial power monitoring installations — to convert raw AC electrical measurements into standardized analog or digital signals for retrofit integration into SCADA and building/plant management systems, particularly useful when upgrading older analog metering panels to modern digital monitoring without replacing the underlying switchgear.
Why Seven Star LLC
Seven Star LLC supplies genuine Enerdis/Socomec TRIAD2 transducers to customers across Oman and the GCC, and works to confirm the exact output configuration, CT/VT ratio requirements, and communications protocol needed for a specific panel retrofit or new installation before order confirmation.
Request a Quote for Enerdis TRIAD2 T304 – Programmable Multi-Output Transducer
Contact Seven Star LLC to request a quotation for the Enerdis TRIAD2 T304 programmable transducer. Our team can help confirm the exact output configuration for your panel retrofit or new installation, and support reliable delivery across Oman and the wider GCC region.
Ordering Notes
Please provide your CT/VT ratios, network wiring configuration (single-phase, split-phase, or 3-wire/4-wire three-phase), and desired analog output range (±20 mA or ±10 V) when requesting a quotation, so Seven Star LLC can confirm the T304 configuration matches your panel’s monitoring requirements before shipment.
Related Products
Related products
Reviews
There are no reviews yet.