Bray 762B00-11300000/A Series 76 Electric Actuator 110 V

Description

Bray 762B00-11300000/A Series 76 electric actuator overview

The Bray 762B00-11300000/A is a size 2 quarter-turn electric actuator from the Series 76 industrial range. It operates from 110 V AC single-phase power and delivers 1,750 lb-in (200 Nm) of on/off output torque in a weatherproof aluminum housing. Buyers often search for this exact base number because the Series 76 family is configured by a long numbering string, and the 762B00-11300000/A entry is one of the fixed base part numbers printed in the maker electrical data tables.

The housing is high-grade aluminum alloy, anodized inside and out and finished with a polyester powder topcoat. A top-mounted visual indicator shows valve position through the full range of travel, including when the power is lost, and a padlockable declutch lever lets an operator move the valve by handwheel without running the motor. The 762B00-11300000/A sits on the ISO 5211 and MSS SP-101 mounting pattern, so it fits most quarter-turn butterfly, ball and plug valves and dampers when the correct bushing and bracket are chosen.

Key features of the 762B00-11300000/A

  • Self-locking worm gear design, so no separate motor brake is needed to hold valve position.
  • Squirrel-cage AC induction motor with Class F insulation and embedded thermal protection that guards against overheating.
  • Direct ISO 5211 mounting with a removable blank drive bushing that can be machined to the valve stem.
  • Four limit switches on most sizes, with torque switches standard from actuator size 2 upward.
  • Anti-condensation heater, permanently lubricated gear train and captive stainless steel cover bolts outside the sealing area.
  • Mechanical travel stops with locknuts and seals to limit over-travel during manual operation.

Technical specifications for 762B00-11300000/A

Parameter Value
Part number 762B00-11300000/A
Series Bray Series 76 industrial electric actuator, quarter turn
Actuator size 2 (type B, medium torque per size)
Supply voltage 110 V AC single-phase
Enclosure Weatherproof, NEMA 4, 4X and 6, IP66/67
On/off output torque 1,750 lb-in (200 Nm)
On/off duty cycle S4 35 percent
Cycles per hour 21
Modulating output torque 1,330 lb-in (150 Nm)
Modulating duty cycle S4 40 percent
Starts per hour 960
Operating speed, 90 degree stroke 25 s at 60 Hz, 30 s at 50 Hz
Full load current 2.3 A at 60 Hz, 2.3 A at 50 Hz
Locked rotor current 2.5 A at 60 Hz, 2.4 A at 50 Hz
Motor power 40 W
Certifications listed for this table FCC, ICES, CE, UKCA and CSA
Ambient temperature -4 degF to 140 degF (-20 degC to 60 degC); optional -40 degF to 140 degF (-40 degC to 60 degC)
Travel 90 degrees, plus or minus 5 degrees
Mounting ISO 5211 / MSS SP-101, removable drive bushing
Manual override Padlockable declutch mechanism with handwheel
Motor insulation Class F, embedded thermal protection at 275 degF (135 degC)
Duty rating standard S4 per EN 60034-1
Conduit entries (sizes 1 to 5) 3 x 3/4 inch NPT or 3 x M20

How to read the 762B00-11300000/A part number

The numbering system published by the manufacturer builds an order number from fields. In 762B00-11300000/A, the leading 76 is the series, 2 is the actuator size, B is the medium-torque type for that size, and the first 0 after the type selects the weatherproof IP66/67 enclosure. The next 0 selects imperial conduit and mounting, the group 113 identifies the actuator, and the digit 0 in the voltage field selects 110 V AC single-phase power. The remaining zeros select on/off control, no external control device, red powder coating with the standard temperature range, and the standard switch package. The final /A is the bushing field and refers to an S45C carbon steel bushing code.

Use the string exactly as shown when you send an enquiry. A different final character, voltage digit or enclosure digit points to a different configuration, and the maker lists those separately.

Torque, duty and speed notes for 762B00-11300000/A

At 110 V AC single-phase and 60 Hz the 762B00-11300000/A strokes a quarter turn in 25 seconds, and in 30 seconds at 50 Hz. Full load current is 2.3 A at 60 Hz and 2.3 A at 50 Hz, while locked rotor current is 2.5 A and 2.4 A respectively. The listed motor power is 40 W. The on/off duty rating is S4 35 percent with 21 cycles per hour at rated torque.

For modulating service the same base number is listed with 1,330 lb-in (150 Nm) of output torque, an S4 40 percent duty rating and up to 960 starts per hour, which is how the maker rates the unit when it is paired with a modulating controller. Always size the valve torque against the lower modulating figure when the loop will position continuously.

Duty ratings follow IEC 60034-1 and are based on starts and cycles per hour at rated torque. The supply voltage tolerance is plus or minus 10 percent and the frequency tolerance is plus or minus 5 percent, so check your site supply before you commit to a voltage code.

Typical applications in Oman and the GCC

Quarter-turn electric actuators such as the 762B00-11300000/A are used wherever compressed air is not practical or where a remote site needs a self-contained drive. In oil and gas facilities they operate butterfly and ball valves on cooling water, fire water, utility and tank farm lines. Utilities and desalination plants use them on seawater intake, brine discharge and distribution headers, and municipal water and wastewater works fit them to pump station and treatment plant isolation valves. Manufacturing sites use them for process water, chemical dosing lines and HVAC dampers.

The weatherproof rating of the 762B00-11300000/A suits outdoor installation under strong sun and humid coastal air, and the optional -40 degF low temperature rating is available from the maker where required. Sand and dust exposure, which is common in Gulf locations, makes the sealed, O-ring protected enclosure and captive cover bolts useful.

Selection and compatibility guidance

Start with the valve torque at its worst operating point, then apply a safety margin before picking the 762B00-11300000/A or a neighbouring size. Confirm the ISO 5211 flange and star or square drive on the valve, and ask for the correct machined bushing code if the blank bushing will not be machined on site. Check the supply: this variant is for 110 V AC single-phase power only. Compare the operating time against your process requirements, because the stroke time changes with supply frequency.

For hazardous areas the Series 76 range includes explosionproof versions with different part numbers, so do not substitute the 762B00-11300000/A, which is a weatherproof model, into a classified zone. Control choices such as modulating electronics, position transmitters and local control stations use other fields of the part number.

Installation, commissioning and maintenance of the 762B00-11300000/A

Mount the actuator vertically or at the orientation allowed in the maker manual, keeping the cover accessible. Fit the machined bushing, align the stem and tighten the mounting bolts evenly. Wire power and control cables through the correct conduit entries, which on sizes 1 to 5 are three 3/4 inch NPT or three M20 openings, and seal unused ports with suitable plugs. Set the open and closed limits and torque switches with the declutch in manual mode, cycle the valve by handwheel first, then run it under power and verify direction, travel and indication before releasing the line.

The gear train is permanently lubricated with a moly EP grease, so routine work is mainly inspection. Check cover O-ring condition and cover bolts after any opening, confirm that the heater is working in humid seasons, test the declutch lever and handwheel, and verify limit and torque switch settings during planned shutdowns. Keep the conduit entries sealed and record the current draw so any rise can be compared with the 2.3 A and 2.3 A full load figures.

Related models, ordering notes and FAQ for 762B00-11300000/A

The same base number structure is used across the Series 76 weatherproof range. The sibling numbers differ in the size and type characters (for example 761A, 761B, 762A, 762B, 763A, 763B, 763C, 764A, 764B, 765A and 765B) and in the voltage digit, which is 0 for 110 V, 2 for 220 V and 9 for 240 V single-phase. Three-phase, 24 V and explosionproof versions exist as separate base part numbers. If you need a modulating controller, a local control station or a special bushing, mention it in the enquiry so the right suffix is quoted.

Common questions concern torque, voltage, stroke time, certification and mounting. The answers below summarise the published data for 762B00-11300000/A; please refer to the maker documents for any application-specific decision.

  • What torque does the Bray 762B00-11300000/A deliver? The Bray 762B00-11300000/A is listed at 1,750 lb-in (200 Nm) on/off output torque on 110 V AC single-phase power, at S4 35 percent duty.
  • What is the stroke time of the 762B00-11300000/A? The published operating speed for the 762B00-11300000/A is 25 seconds at 60 Hz and 30 seconds at 50 Hz for the 90 degree travel.
  • Is the 762B00-11300000/A suitable for hazardous areas? No. The 762B00-11300000/A is a weatherproof (IP66/67, NEMA 4, 4X, 6) version. The Series 76 range has separate explosionproof part numbers for classified zones.
  • What mounting standard does the 762B00-11300000/A use? It mounts to ISO 5211 and MSS SP-101 with a removable drive bushing that can be machined to suit the valve stem, so check the valve flange and drive size.
  • What should I include when requesting a quote for 762B00-11300000/A? Send the exact part number 762B00-11300000/A, quantity, supply voltage and frequency, valve details and delivery location with the RFQ so the supplier can confirm availability.

Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer. Product names and part numbers are used only to identify the item requested.

Documents and quotation

A Series 76 sales data sheet is attached to this page as a datasheet for reference. To request a quotation, send the RFQ with the exact part number 762B00-11300000/A, the quantity, the supply voltage and frequency, the valve make and ISO 5211 flange, and the delivery location in Oman or the GCC. We will confirm availability and lead time against the 762B00-11300000/A request.

Bray 762B00-11300000/A vs Other Bray Series 76 Electric Actuator V Variants

Pick this variant when 762B00-11300000/A 110 is what your sizing calculation or the installed nameplate calls for. Neighbouring variants in the same family share the mounting concept and most accessories, so the difference that matters on site is exactly that rating.

Variant Distinguishing detail
Bray 762B00-11300000/A Series 76 Electric Actuator 110 V (this page) 762B00-11300000/A 110
Bray 763B00-11300000/A Series 76 Electric Actuator 110 V 763B00-11300000/A 110
Bray 762B00-11320000/A Series 76 Electric Actuator 220 V 762B00-11320000/A 220
Bray 763B00-11320000/A Series 76 Electric Actuator 220 V 763B00-11320000/A 220

Other Models in the Bray S76 Electric Range

Seven Star LLC supplies models from the Bray S76 Electric range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
Bray 761A00-11300000/A Series 76 Electric Actuator 110 VElectric ActuatorsView details
Bray 761B00-11300000/A Series 76 Electric Actuator 110 VElectric ActuatorsView details
Bray 762A00-11300000/A Series 76 Electric Actuator 110 VElectric ActuatorsView details
Bray 762B00-11300000/A Series 76 Electric Actuator 110 VElectric ActuatorsYou are viewing this model
Datasheets & Documents
  • PDF Datasheet Bray 762B00-11300000/A Series 76 Electric Actuator 110 V Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Bray International is the Houston-based maker of butterfly valves, knife gate and slurry valves, actuators and valve controls. It was incorporated in Houston on 23 April 1986, founded by Craig C. Brown and Frank J. Raymond, and assembled its first butterfly valves in 1987. Among them were the Series 20/21, 30/31 and 35/36 resilient-seated valves that are still in its range.

Seven Star LLC is an independent supplier in Muscat. We list Bray valves, actuators, positioners and switch boxes, and supply complete automated valve packages and spare parts to water, oil and gas and process plants in Oman and the GCC.

Bray at a glance

Established 23 April 1986, Houston, Texas, by Craig C. Brown and Frank J. Raymond
First products Series 20/21 sanitary and chemical, Series 30/31 general purpose and Series 35/36 large-diameter butterfly valves, first assembled in 1987
Product families Resilient-seated, high-performance and triple-offset butterfly valves, knife gate and slurry valves, pneumatic and electric actuators, positioners and valve status monitors
Applications Water and wastewater, desalination, HVAC, chemical, oil and gas, power, mining and slurry service

Bray products we list

Family Models Typical use
Resilient-seated butterfly valves Series 20/21, 22/23 PTFE-lined, 30/31, 32/33, 35/36, 3A/3AH Water, seawater, HVAC and general utility isolation; PTFE-lined for corrosive chemicals
High-performance and triple-offset butterfly valves McCannalok 40/41, Tri Lok Higher pressure and temperature, steam, hydrocarbons and tight shut-off
Knife gate and slurry valves 740, 755, 941, 762, 765, 767, 768 Slurries, sludge, pulp, mining tailings and wastewater solids
Actuators Series 92/93 rack and pinion, Series 98 scotch yoke, Series 70 electric Automating quarter-turn valves with air or electric power
Positioners and switch boxes 6A, 6P, 5A, 5C Ex d, Series 54 sensors Modulating control and open/closed position feedback to the control system

The butterfly valve type follows the duty. Resilient-seated valves seal on a rubber liner, which makes them economical and bubble-tight for water and utilities. High-performance valves use an offset disc and a PTFE or metal seat for higher pressures and temperatures. Triple-offset valves add a third geometric offset so the disc meets the seat without rubbing, which allows a metal-to-metal, zero-leakage seal in steam and hydrocarbon service.

Where Bray valves are used

In Oman and the GCC, Bray valves and actuators are used in water transmission and distribution, desalination and wastewater plants, district cooling and HVAC, petrochemical and chemical plants, power stations and mining and slurry lines.

Ordering Bray valves: what we need

Send the series, size (NPS or DN), end connection (wafer, lug or flanged), body, disc and seat materials, and the medium, pressure and temperature. For actuated valves, add the actuator type (double-acting or spring return), air or electric supply, and any positioner or switch box needed.

Facts checked against Bray company history, October 2026.

FAQ

Questions about the Bray 762B00-11300000/A Series 76 Electric Actuator

Answers from our engineering team on installation, compatibility and integration.

01What torque does the Bray 762B00-11300000/A deliver?
The Bray 762B00-11300000/A is listed at 1,750 lb-in (200 Nm) on/off output torque on 110 V AC single-phase power, at S4 35 percent duty.
02What is the stroke time of the 762B00-11300000/A?
The published operating speed for the 762B00-11300000/A is 25 seconds at 60 Hz and 30 seconds at 50 Hz for the 90 degree travel.
03Is the 762B00-11300000/A suitable for hazardous areas?
No. The 762B00-11300000/A is a weatherproof (IP66/67, NEMA 4, 4X, 6) version. The Series 76 range has separate explosionproof part numbers for classified zones.
04What mounting standard does the 762B00-11300000/A use?
It mounts to ISO 5211 and MSS SP-101 with a removable drive bushing that can be machined to suit the valve stem, so check the valve flange and drive size.
05What should I include when requesting a quote for 762B00-11300000/A?
Send the exact part number 762B00-11300000/A, quantity, supply voltage and frequency, valve details and delivery location with the RFQ so the supplier can confirm availability.