- Automation & ControlView all 2,718 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- HMI Displays
- Servo Drives
- Pneumatic Cylinders
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: GESTRA
GESTRA UNA 14 Ball Float Steam Trap PN 25, DN 15-25
Description
GESTRA UNA 14 Ball Float Steam Trap PN 25: overview
The GESTRA UNA 14 is a ball float steam trap with a flange-mounted cover and a control unit that opens the orifice according to the condensate level. Because the way it works is not affected by backpressure, the manufacturer describes the family as suitable for universal use, and it is built for large condensate flowrates. The GESTRA UNA 14 is the PN 25 member of a family that also includes the UNA 16 and UNA 16A in PN 40 and Class 150 ratings.
Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer. We list the UNA 14 for buyers who need an exact GESTRA type for a repair, a replacement or a new project and want a clear technical summary before they ask for a quotation. Everything below is condensed from the manufacturer datasheet, so you can compare the UNA 14 with the line conditions on your own drawings. Where a value is not stated in the datasheet, we leave it out rather than guess.
GESTRA equipment is common on steam and condensate systems, boiler houses and process plants, and many installed units in Omani and Gulf facilities are now several years old. That is why buyers often search by the exact type designation such as UNA 14. Matching the designation, nominal size, pressure rating and connection type is the surest way to get the right replacement, and our team can help check these details against the nameplate or the earlier project documentation before a quotation is issued.
Key features of the UNA 14
The datasheet describes the following points about the UNA 14. They explain why this ball float steam trap is chosen for its duty and what to look for when comparing it with other options.
- Ball float with a sealing unit and rolling ball, so discharge follows the condensate level.
- Operation is unaffected by backpressure, which suits shared or lifted condensate headers.
- Suitable for large condensate flowrates.
- Duplex control unit with level-dependent float control plus temperature-dependent venting through the 5N2 membrane regulator capsule, for saturated steam systems.
- Simplex control unit for cold condensate and distillate, and Simplex R with an internal bypass for draining rotating cylinders.
- Flow direction can be adapted in the field, and an h or v version can be created later by rotating the cover and the controller.
Technical specifications of the UNA 14
The table below summarises the main data for the UNA 14 taken from the manufacturer datasheet. Always confirm the final pressure and temperature limits against the datasheet for the exact version and connection you plan to order, because ratings depend on connection type and size.
| Parameter | Value |
|---|---|
| Nominal sizes | DN 15, 20, 25 (NPS 1/2, 3/4, 1) |
| Pressure rating | PN 25 |
| Body material | 1.0460 / SA105 |
| Cover material | 5.3103 / A536 60-40-181 |
| Body gasket | Graphite/CrNi |
| Orifices (maximum differential pressure) | 4 bar and 13 bar |
| Pressure at -10 to 50 C | 25.0 bar g, falling to 15.1 bar g at 350 C |
| End connections | Flange EN 1092-1 B1 PN 25, screwed socket ISO 228-1 G, screwed socket ASME B16.11 NPT |
| Fluids (PED) | Group 2 |
| Optional extras | Float lifting lever, manual vent valve, sealing plug, Perbunan rolling ball |
Typical applications in Oman and the GCC
The UNA 14 is a ball float steam trap, and the following use cases show where a unit of this kind is typically applied across oil and gas, utilities, water and manufacturing in Oman and the wider GCC. They are examples based on the described function and not a guarantee of suitability, so the actual operating data should always be checked.
- On saturated steam mains and process heat exchangers in refineries and petrochemical plants, a float trap discharges condensate as soon as it forms, which keeps heat-transfer surfaces free of water.
- Utilities and district-cooling plants in the GCC use the same principle on steam coils and tracing headers, where varying load makes continuous discharge useful.
- In manufacturing, the Simplex R version is described by the manufacturer for draining rotating cylinders, which matters in textile, paper and food drying lines.
Selection and compatibility notes
Selecting the UNA 14 correctly starts with the process data. Collect the operating pressure, the maximum and minimum temperature, the fluid, the flowrate and the connection standard of the existing pipework, then compare them with the datasheet. The notes below summarise the main decision points for this model.
- Choose the orifice from the differential pressure of the application: the 4 bar orifice for low differential pressures and the 13 bar orifice for higher ones.
- Choose Duplex for saturated steam, Simplex for cold condensate or distillate, and Simplex R where a continuous bypass is needed.
- If the pressure rating of PN 25 is not enough, the same family continues with the UNA 16 and UNA 16A at PN 40 and Class 150.
Installation and commissioning of the UNA 14
Before installing the UNA 14, flush the line to remove weld spatter, scale and construction debris, because even a robust ball float steam trap can be damaged or held open by foreign particles. Check that the flow direction arrow or the marked inlet on the UNA 14 matches the piping, and confirm that the nameplate type, size and pressure rating agree with the purchase documents.
Support the pipework so that no piping stress is transferred to the body of the UNA 14. Use new gaskets of a type suitable for the fluid and temperature, tighten flange or union bolts evenly and in a cross pattern, and follow the instructions in the manufacturer installation and operating manual for the exact model. If the equipment is used in a potentially explosive area, the plant operator remains responsible for zoning and for preventing static charge, as the datasheet explains for GESTRA equipment.
During commissioning, bring the system up gradually. Open isolation valves slowly, vent trapped air where the design allows, and observe the UNA 14 during the first warm-up for leaks at joints and for unusual noise or vibration. Record the first operating pressure and temperature so that later inspections have a reference.
Maintenance and service
The control unit sits behind a flange-mounted cover, so inspection means opening the cover and checking the float, the rolling ball and the membrane regulator capsule.
The datasheet allows the flow direction to be changed by rotating the cover and controller, which is useful when piping is modified.
A short routine inspection plan helps the UNA 14 last longer. Note the date of installation, the service conditions and any events such as water hammer or overpressure. At each planned shutdown, inspect the visible joints, check for external corrosion or leakage and compare performance against the commissioning record. Only use spare parts and gaskets that suit the exact type and rating of the UNA 14, and isolate and depressurise the line fully before any work is started.
Related products and ordering notes
Orders for the UNA 14 should state the type designation, nominal size, pressure rating, end connection standard, material or version and the quantity required. If you are replacing an existing unit, add the nameplate data and a photograph of the nameplate when possible. The manufacturer family also includes other steam, condensate and flow control products, and we can quote related items together with the UNA 14 when you send a combined enquiry. Seven Star LLC does not publish prices on this page, so each enquiry is answered with a written quotation.
Frequently asked questions
What pressure rating does the UNA 14 have? The UNA 14 is a PN 25 ball float steam trap. Its datasheet gives 25.0 bar g at the lower temperature end, reducing to 15.1 bar g at 350 degrees C, based on EN 1092-1 ratings.
Which orifices are available? The datasheet lists orifices that correspond to maximum differential pressures of 4 bar and 13 bar for the UNA 14. The correct orifice is chosen from the actual differential pressure.
Is it affected by backpressure? No. The manufacturer states that the operation of the equipment is unaffected by backpressure, which is why it is described as suitable for universal use.
What end connections can be supplied? Flange EN 1092-1 B1 PN 25, screwed sockets ISO 228-1 G and screwed sockets ASME B16.11 NPT are listed for the UNA 14 in the datasheet.
Which control unit should I pick? Duplex is meant for saturated steam systems, Simplex suits cold condensate and distillate, and Simplex R adds a bypass for draining rotating cylinders.
Documents and quotation
The manufacturer datasheet for the UNA 14 is attached to this page as a PDF so you can verify every value above and share it with your engineering team. To receive a quotation, send an RFQ that includes the part number UNA 14, the nominal size, the pressure rating and connection type, and the quantity you need. Our team in Muscat will confirm availability and lead time and reply with a written offer for delivery to Oman and the GCC.
Datasheets & Documents
- Datasheet GESTRA UNA 14 Ball Float Steam Trap PN 25, DN 15-25 Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
GESTRA is the German steam and condensate specialist behind the UNA ball float steam traps, the MPA blowdown valves and a long line of boiler level and conductivity controls. It was founded in Bremen in 1902 by Gustav F. Gerdts, and has been part of Spirax Sarco since 2017.
Seven Star LLC is an independent supplier in Muscat. We list GESTRA steam traps, blowdown valves and boiler control equipment, and supply GESTRA parts and spares to boiler houses and process plants in Oman and the GCC.
GESTRA company profile
| Established | 29 October 1902, Bremen, Germany, by Gustav Friedrich Gerdts; renamed Gustav F. Gerdts KG in 1907 |
|---|---|
| Ownership history | Became a stock corporation (GESTRA AG) in 1987, was taken over by Flowserve in 2002, and has been part of the Spirax Sarco group since 2017 |
| Product families | Steam traps, non-return and check valves, boiler blowdown valves, control valves, and boiler control electronics for level, conductivity and temperature |
| Applications | Steam boilers, steam distribution and condensate return in process plants, power stations, hospitals, food and textile plants |
Milestones
- 1902: Gustav Friedrich Gerdts founds the company in Bremen on 29 October.
- 1907: The company is renamed Gustav F. Gerdts KG.
- 1987: It becomes a stock corporation, GESTRA AG.
- 2002: Flowserve takes over GESTRA.
- 2017: GESTRA becomes part of the Spirax Sarco group.
GESTRA products we list
| Series | Type | What it does |
|---|---|---|
| UNA 45, UNA 16, UNA 38 | Ball float steam traps | Continuous condensate discharge from heat exchangers and process equipment; the UNA 38 is the high-pressure version (PN 100) |
| BK 45 | Bimetallic steam trap | Robust trap for steam main drainage and tracing, resistant to water hammer |
| MK 45, TK 23, SMK 22-81 | Thermostatic steam traps | Air venting and condensate discharge; the SMK 22-81 is the sanitary version for clean steam |
| MPA 46 | Rapid-action blowdown valve | Short, intermittent bottom blowdown that removes sludge from the boiler |
| NRS 1-54, NRR 2-50, NRR 2-60, NRGT 26-2 | Boiler level controls | Water level limiting, feedwater control and continuous level measurement |
| LRGT 16-1, LRR 1-50 | Conductivity measurement and control | Keeps boiler water conductivity in range through continuous blowdown |
| TRS 5-50 | Safety temperature limiter | SIL 3 temperature limiting for boilers and hot water systems |
The type of steam trap follows the duty. Ball float traps discharge condensate as soon as it forms, which suits heat exchangers with changing loads. Thermostatic and bimetallic traps hold condensate back slightly and suit steam mains, tracing and air venting. On the boiler itself, GESTRA level and conductivity electronics work as a system: electrodes or transmitters in the boiler, controllers in the panel, and the feedwater and blowdown valves they drive.
Where GESTRA products are used
In Oman and the GCC, GESTRA equipment is used in boiler houses of refineries, petrochemical and fertiliser plants, power and desalination stations, food and beverage plants, laundries, hotels and hospitals.
Ordering GESTRA parts: what we need
Send the type designation, pressure rating (PN) and connection size (DN), the end connection (flanged, screwed or socket weld), the operating pressure and condensate load for steam traps, and the supply voltage and bus type (CAN bus, 4-20 mA) for control equipment. For electrodes, add the insertion length.
Facts checked against GESTRA company history and Bremen city records, October 2026.
Browse GESTRA products by category: Liquid Analysis Sensors.
FAQ
Questions about the GESTRA UNA 14 Ball Float Steam Trap PN 25, DN 15-25
Answers from our engineering team on installation, compatibility and integration.
01What pressure rating does the UNA 14 have?
The UNA 14 is a PN 25 ball float steam trap. Its datasheet gives 25.0 bar g at the lower temperature end, reducing to 15.1 bar g at 350 degrees C, based on EN 1092-1 ratings.
02Which orifices are available?
The datasheet lists orifices that correspond to maximum differential pressures of 4 bar and 13 bar for the UNA 14. The correct orifice is chosen from the actual differential pressure.
03Is it affected by backpressure?
No. The manufacturer states that the operation of the equipment is unaffected by backpressure, which is why it is described as suitable for universal use.
04What end connections can be supplied?
Flange EN 1092-1 B1 PN 25, screwed sockets ISO 228-1 G and screwed sockets ASME B16.11 NPT are listed for the UNA 14 in the datasheet.
05Which control unit should I pick?
Duplex is meant for saturated steam systems, Simplex suits cold condensate and distillate, and Simplex R adds a bypass for draining rotating cylinders.


















Reviews
There are no reviews yet.