- Automation & ControlView all 2,781 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- Pneumatic Cylinders
- HMI Displays
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: KRACHT
KRACHT DBD 10 K5 N1 D 300 S1 Relief Valve for KP 1 Gear Pump
Description
KRACHT DBD 10 K5 N1 D 300 S1 pressure relief valve for KP 1 gear pumps: overview
The KRACHT DBD 10 K5 N1 D 300 S1 is a directly operated pressure relief valve of the KRACHT DBD series, built for direct attachment to the KP 1 high-pressure gear pump. The valve cone is pressed onto its seat by a spring; when the set pressure is reached the cone lifts and the pumped fluid flows from the pressure connection to the tank connection. In the KP catalog the KRACHT DBD 10 K5 N1 D 300 S1 appears in the list of ordering codes for the KP 1 attachment valve, with a set pressure range from 10 to 280 bar and discharge flows of 15 and 75 l/min at the two ends of that range.
Hydraulic power units protect the pump and the circuit with exactly this kind of valve, and the designation DBD 10 K5 N1 D 300 S1 tells a fitter the nominal size, the version and the pressure stage. Because the codes are stage-specific, the correct code matters when a valve is replaced: the pressure range printed in the table must match the system design pressure.
Key features of the DBD 10 K5 N1 D 300 S1
- Directly operated poppet valve with a spring-loaded valve cone.
- Direct attachment to the KP 1 gear pump with straight (GDA) or elbow (WDA) flanged connection for sizes 1/12 and 1/16.
- Tank connection G1/2 and pressure gauge connection G1/4.
- Set pressure range from 10 to 280 bar for this code.
- Fixing screws, the disc to drawing number 17 406/5 and two O-rings 18 x 2.5 are included in the scope of delivery.
The poppet is fitted with damping to absorb shocks when the valve opens, and the valve cartridge can alternatively be screwed into a bore of the specified contour in a customer body, which gives designers a second way to use the same valve technology.
Technical specifications for the DBD 10 K5 N1 D 300 S1
| Parameter | Value |
|---|---|
| Designation | DBD 10 K5 N1 D 300 S1 |
| Valve type | Directly operated pressure relief valve, poppet type |
| Nominal size | 10 |
| Application | Direct attachment to KP 1 gear pump |
| Set pressure 1 | 10 bar |
| Set pressure 2 | 280 bar |
| Discharge flow at set pressure 1 | 15 l/min |
| Discharge flow at set pressure 2 | 75 l/min |
| Tank connection | G1/2 |
| Pressure gauge connection | G1/4 |
| Maximum working pressure of DBD 10 series | 400 bar |
| Viscosity range | 10 to 600 mm2/s |
| Fluid temperature with NBR seals | -20 to 80 degrees C |
| Fluid temperature with FKM seals | -15 to 80 degrees C |
| Maximum ambient temperature | 60 degrees C |
| Filtration | 20 micrometres or finer |
| Mounting position | Optional |
Set pressures and discharge flows are quoted from the ordering code table in the KP 1 to 5 catalog; general characteristics are quoted from the DBD directly operated valve data sheet. Hydraulic oils to DIN 51524 and 51525 are the standard fluids, other fluids on request.
Typical applications in Oman and the GCC
KP gear pumps supply hydraulic circuits and gearbox lubrication systems, and a relief valve such as the DBD 10 K5 N1 D 300 S1 is the safety element that limits system pressure. In Oman and the GCC, hydraulic units appear on workshop machinery, test benches and auxiliary systems at oil and gas, power and water facilities. Where a unit has lost its valve or the pressure stage has to change after a re-rating, the exact code is what the purchase order must state.
Selection and compatibility notes for the DBD 10 K5 N1 D 300 S1
- Confirm the pump: the valve is for direct attachment to KP 1 (flange sizes 1/12 or 1/16).
- Select the pressure stage from the table; this code covers 10 to 280 bar.
- Check seal material against the fluid and temperature: NBR from -20 degrees C, FKM from -15 degrees C, both up to 80 degrees C.
- Choose straight or elbow flange to suit the space on the unit.
- Confirm that the tank line is routed to the G1/2 connection with low back pressure; the outlet pressure limit for the DBD 10 series is 210 bar.
Allow for the viscosity range of 10 to 600 mm2 per second and keep the fluid filtered to 20 micrometres or finer so that the valve seat is not damaged by debris.
Installation, commissioning and maintenance of the DBD 10 K5 N1 D 300 S1
Fit the disc and both O-rings supplied with the valve, attach the valve to the KP 1 flange with the screws included and connect the tank line. Start the pump at the lowest setting, bleed the circuit and raise the set pressure step by step while watching a gauge on the G1/4 connection. Loosen the counter nut, adjust the setting screw to the required value, retighten the counter nut and fit the protection cap. Record the final setting in the commissioning sheet.
Check the valve setting at each service interval, look for external leakage at the flange and the setting screw and replace O-rings if the surface is damaged. If the valve chatters or the set pressure drifts, inspect the cone and seat for wear or contamination. Keep the code DBD 10 K5 N1 D 300 S1 on the unit documentation so a like-for-like replacement can be sourced quickly.
Related KRACHT products and ordering notes
The DBD 10 K5 N1 D 300 S1 is one of several DBD codes listed for KP 1, each covering a different pressure stage. Together with the KP 1 pump in aluminium or cast iron, it forms a compact pump and relief valve unit that can also be combined with multiple pump arrangements. State the pump type, the required stage and the quantity in your enquiry.
KRACHT DBD 10 K5 N1 D 300 S1 vs Other KRACHT DBD 10 K5 N1 D Variants
Pick this variant when 300 is what your sizing calculation or the installed nameplate calls for. Neighbouring variants in the same family share the mounting concept and most accessories, so the difference that matters on site is exactly that rating.
| Variant | Distinguishing detail |
|---|---|
| KRACHT DBD 10 K5 N1 D 300 S1 Relief Valve for KP 1 Gear Pump (this page) | 300 |
| KRACHT DBD 10 K5 N1 D 200 S1 Relief Valve for KP 1 Gear Pump | 200 |
| KRACHT DBD 10 K5 N1 D 085 S1 Relief Valve for KP 1 Gear Pump | 085 |
| KRACHT DBD 10 K5 N1 D 016 S1 Relief Valve for KP 1 Gear Pump | 016 |
Frequently asked questions
Here are the most frequent questions about the DBD 10 K5 N1 D 300 S1.
- What is the DBD 10 K5 N1 D 300 S1? The DBD 10 K5 N1 D 300 S1 is a directly operated DBD pressure relief valve for direct attachment to the KRACHT KP 1 gear pump.
- What pressure range does the DBD 10 K5 N1 D 300 S1 cover? The KP catalog lists set pressures of 10 and 280 bar for this code, with discharge flows of 15 and 75 l/min.
- Which connections does the DBD 10 K5 N1 D 300 S1 have? It has a tank connection G1/2 and a pressure gauge connection G1/4, and attaches to the KP 1 with a straight or elbow flange.
- What is included with the DBD 10 K5 N1 D 300 S1? The catalog states that fixing screws, a disc to drawing 17 406/5 and two O-rings 18 x 2.5 are included in the scope of delivery.
- Which seals and fluids can be used with the DBD 10 K5 N1 D 300 S1? NBR seals suit fluid temperatures from -20 to 80 degrees C and FKM seals from -15 to 80 degrees C; standard fluids are hydraulic oils to DIN 51524 and 51525.
Documents and quotation
The KP 1 to 5 catalog with the DBD ordering code table is offered as a datasheet on this page. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer. To request a quotation for the DBD 10 K5 N1 D 300 S1, send an RFQ with the part number, the KP pump type and the quantity.
Datasheets & Documents
- Datasheet KRACHT DBD 10 K5 N1 D 300 S1 Relief Valve for KP 1 Gear Pump Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
KRACHT is the German maker of gear pumps, gear flow meters, hydraulic valves, motors and cylinders. The company was entered in the trade register in 1911 as Hillebrand & Kracht OHG and is based in Werdohl, in the Sauerland region of Germany. For most of its history it was a medium-sized family company; in January 2024 it became part of the Atlas Copco Group, in the Power and Flow division.
Seven Star LLC lists KRACHT pumps, flow meters, valves and hydraulic motors, and sources them by type key for machinery and marine users in Oman.
KRACHT company profile
| Founded | 1911, registered as Hillebrand & Kracht OHG |
|---|---|
| Headquarters | Werdohl, North Rhine-Westphalia, Germany; in today's premises since 1971 |
| Ownership | Atlas Copco Group since January 2024 (Power and Flow division, Power Technique business area); previously a family company |
| Size | About 440 employees and revenue of about EUR 72 million in 2022, as reported by Atlas Copco |
| Subsidiaries | USA, China and Hungary (KRACHT Hidraulik Kft.) |
| Product families | External gear pumps for lube oil, fuel and process duty, VC and VZ gear flow meters, pressure and flow control valves, hydraulic motors and cylinders |
Milestones
- 1911: Hillebrand & Kracht OHG is entered in the trade register.
- 1971: The company moves into its present premises in Werdohl.
- 1992: A gear manufacturer in Hungary is acquired, today KRACHT Hidraulik Kft.
- 2023–2024: Atlas Copco agrees to buy KRACHT in December 2023 and completes the deal in January 2024.
KRACHT pumps, flow meters and valves listed
The listing follows four product groups, pumps, fluid measurement, valves and drives:
- Pump technology: KF gear pumps for transfer of lubricating and other fluids, the KF-F version for fuels, and KP high pressure gear pumps
- Fluid measurement technology: gear type flow meters such as the VCA in aluminum
- Valve technology: SPV and SPVF pressure relief valves, the DBD directly controlled poppet valve, HV and HVF pilot operated valves and the DV B hydraulically pilot controlled valve
- Drive technology: KM hydraulic gear motors
Where KRACHT equipment is used
KRACHT equipment serves the marine, renewable energy, process technology and hydraulics industries. In practice that means lube oil and fuel oil transfer on engines, gearboxes and compressors, oil supply units, and metering of oils, resins, paints and other viscous media with gear flow meters in dosing and test bench systems. Enquiries from the GCC are mostly for a KRACHT pump or valve fitted to an imported machine or a ship's auxiliary system.
KRACHT products we list
Ordering KRACHT parts: what we need
KRACHT products carry a type key on the nameplate that encodes size, direction of rotation, shaft end, housing and seal material, connections and special numbers. An example from this page is SPV 10 L1G 1 A 12. Send the complete key and the serial or order number shown with it. If the plate is damaged, send the fluid and viscosity, flow rate, operating pressure and temperature, drive speed, port type and size, and photos with main dimensions. For KRACHT flow meters add the measuring range and the pickup or electronics required. We compare the key with KRACHT documentation and supply the manufacturer's data sheet on request.
Frequently requested KRACHT models: KRACHT Pump Technology Series.
Facts checked against KRACHT company literature and Atlas Copco's acquisition announcements, October 2026.
Browse KRACHT products by category: Safety Relief Valves, Pumps, Flowmeters, Electromotors.
FAQ
Questions about the KRACHT DBD 10 K5 N1 D 300 S1 Relief Valve for KP 1
Answers from our engineering team on installation, compatibility and integration.
01What is the DBD 10 K5 N1 D 300 S1?
The DBD 10 K5 N1 D 300 S1 is a directly operated DBD pressure relief valve for direct attachment to the KRACHT KP 1 gear pump.
02What pressure range does the DBD 10 K5 N1 D 300 S1 cover?
The KP catalog lists set pressures of 10 and 280 bar for this code, with discharge flows of 15 and 75 l/min.
03Which connections does the DBD 10 K5 N1 D 300 S1 have?
It has a tank connection G1/2 and a pressure gauge connection G1/4, and attaches to the KP 1 with a straight or elbow flange.
04What is included with the DBD 10 K5 N1 D 300 S1?
The catalog states that fixing screws, a disc to drawing 17 406/5 and two O-rings 18 x 2.5 are included in the scope of delivery.
05Which seals and fluids can be used with the DBD 10 K5 N1 D 300 S1?
NBR seals suit fluid temperatures from -20 to 80 degrees C and FKM seals from -15 to 80 degrees C; standard fluids are hydraulic oils to DIN 51524 and 51525.


















Reviews
There are no reviews yet.