Brand:

KRACHT VCA Aluminum Gear Flow Meter

Description

Overview

The KRACHT VCA aluminium gear flow meter is a cost-effective, lightweight volumetric measurement instrument built on the same gear-type positive displacement principle as KRACHT’s standard VC series, but housed in an aluminium body instead of the heavier steel construction used for the highest-pressure VC variants. Covering a measuring range of 0.02 to 200 l/min at working pressures up to 240 bar and media temperatures from −10°C to 80°C, the KRACHT VCA gear flow meter is purpose-built for lube oil monitoring, fuel consumption measurement, and general hydraulic condition monitoring where the extreme pressure and temperature envelope of the standard VC line is not required and a lighter, more economical meter body delivers the same measurement reliability at lower installed cost.

Working closely with plant engineers in the region, Seven Star LLC proudly supplies the VCA aluminium gear flow meter to hydraulic workshops, generator and marine service providers, and industrial maintenance teams throughout Oman and the wider GCC. Facility engineers in Muscat, Sohar, and Salalah can source KRACHT metrology with calibration documentation and regional technical support through Seven Star LLC – useful for maintenance teams and OEMs who need dependable, traceable flow measurement with a formal quotation and the manufacturer datasheet.

Measurement Principle

The KRACHT VCA gear flow meter operates on the same displacement principle used across the KRACHT gear-type flow meter range: two precision-machined gears mesh together inside a sealed measuring chamber, and the liquid flowing through the meter forces the gears to rotate at a speed directly proportional to the volumetric flow rate passing through the body. As with the standard VC series, the gears run in an almost contactless manner, lubricated by the measuring medium itself, which removes the need for a separate lubrication circuit and keeps internal friction losses low across the meter’s operating range. Because the measuring principle does not depend on a conditioned flow profile, the VCA meter can be installed without dedicated straight inlet or outlet piping runs, simplifying integration into compact lube-oil and fuel-monitoring skids.

Gear rotation is scanned by a pulse-output sensor mounted to the meter housing: as the measuring unit rotates through each tooth pitch, the sensor generates a signal corresponding to the geometric tooth volume, giving a direct pulse-frequency output proportional to flow rate. This pulse-output approach keeps the VCA gear flow meter simple to integrate with counters, PLCs, and basic monitoring systems where a full encoder or IO-Link signal chain is unnecessary. The practical result for plant engineers is low pressure drop across the meter body, stable accuracy across a useful viscosity range, and a lightweight aluminium housing that reduces installed weight on mobile and skid-mounted equipment without compromising the underlying gear-type measurement accuracy.

Engineering Design of the KRACHT VCA

The VCA gear flow meter is housed in a compact aluminium body, engineered to reduce overall unit weight compared with the steel-bodied standard VC series while retaining the same internal gear-set measurement geometry. The aluminium construction makes the VCA meter well suited to mobile equipment, generator sets, and skid-mounted monitoring packages where minimizing installed weight matters, without sacrificing the measurement repeatability that defines the broader KRACHT gear flow meter range. Process connections are sized to match the specified measuring range, and the meter accepts standard hydraulic fitting configurations for straightforward retrofit into existing lube-oil and fuel lines.

The standard VCA configuration is fitted with a pulse output for direct connection to counters, totalizers, and PLC inputs, giving instrumentation teams a straightforward signal to integrate into existing monitoring panels. The compact aluminium housing keeps the sensor and pickup assembly close to the gear chamber, minimizing susceptibility to electrical noise in installations near generator sets and variable-frequency equipment. Its reduced pressure rating relative to the standard VC series – up to 240 bar rather than 480 bar – reflects its design intent as a cost-effective monitoring solution for lube oil circuits and fuel lines rather than the highest-pressure hydraulic test bench duty served by the steel-bodied VC line.

Key Features

Buyers comparing the KRACHT VCA gear flow meter against turbine and paddle-wheel alternatives will find the following features decisive. The KRACHT VCA gear flow meter is engineered to deliver dependable, cost-effective flow monitoring across a wide range of lube-oil and fuel-monitoring applications. Its key features include:

  • Lightweight aluminium body construction that reduces installed weight compared with the standard steel-bodied VC series.
  • Measuring range of 0.02 to 200 l/min, suited to lube oil monitoring and fuel consumption measurement duties.
  • Gear-type positive displacement measurement principle shared with the wider KRACHT VC flow meter range.
  • Working pressures up to 240 bar and media temperatures from −10°C to 80°C.
  • Self-lubricating gear set, with all moving parts lubricated by the measuring medium itself.
  • Straightforward pulse output for direct connection to counters, totalizers, and PLC monitoring inputs.
  • No requirement for upstream or downstream flow conditioners, simplifying installation into compact skids.
  • Cost-effective alternative to the standard VC series for applications that do not require the highest pressure or temperature envelope.

Industrial Applications

The KRACHT VCA gear flow meter is deployed wherever accurate, low-cost volumetric monitoring of lubricants and fuels is needed, and the KRACHT VCA gear flow meter is routinely specified for this role across the region. Typical duties include lube oil consumption monitoring on generator sets and industrial gearboxes, fuel consumption measurement on stationary and mobile diesel equipment, condition monitoring on hydraulic power units where oil flow is a proxy for pump and valve health, and general-purpose flow verification on skid-mounted lubrication and fuel-transfer systems. Its lightweight aluminium body also makes it a practical choice for retrofit onto mobile plant and generator packages where minimizing added weight is a design consideration alongside measurement accuracy.

With fast quotation turnaround and technical support, Seven Star LLC distributes the VCA gear flow meter to hydraulic workshops, generator and power-equipment service providers, marine engineering firms, and industrial maintenance teams across Oman and the GCC, including the industrial zones of Sohar and Salalah. Regional integrators building lube-oil monitoring skids, fuel-consumption panels, or generator condition-monitoring packages can source genuine KRACHT flow meters, calibration support, and replacement components locally, reducing lead times for both new projects and urgent field replacements throughout the Sultanate of Oman.

Technical Specifications

Engineers specifying the KRACHT VCA gear flow meter for a new installation should reference the table below, which summarizes the principal specifications of the KRACHT VCA gear flow meter; exact configuration and connection size vary by ordered variant.

Parameter Specification
Model KRACHT VCA
Measurement Technology Gear-type, positive displacement volumetric flow meter
Body Material Aluminium
Measuring Range 0.02 – 200 l/min
Media Temperature −10°C to 80°C
Maximum Working Pressure Up to 240 bar
Output Signal Pulse output
Sensing Method Contactless, gear-position pulse sensor
Typical Applications Lube oil monitoring, fuel consumption measurement, generator and hydraulic condition monitoring

Request a Quote for KRACHT VCA

Ready to order the KRACHT VCA aluminium gear flow meter for your facility or fleet? Seven Star LLC supports formal RFQ submissions, technical datasheet requests, and availability and lead-time inquiries for the KRACHT VCA gear flow meter. With engineering support in Muscat, our instrumentation and process equipment division can advise on measuring range selection, connection sizing, and installation requirements for your specific lube-oil or fuel-monitoring application. Contact Seven Star LLC today to request a formal quotation, technical datasheet, or to discuss availability and lead time for the VCA gear flow meter and full KRACHT fluid measurement technology range across Muscat, Sohar, Salalah, and the wider Sultanate of Oman.

Browse the full KRACHT range or see more Flowmeters products supplied by Seven Star LLC in Oman and the GCC.

Datasheets & Documents
  • PDF Datasheet KRACHT VCA Flow Meter Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

KRACHT is the German maker of gear pumps, gear flow meters, hydraulic valves, motors and cylinders. The company was entered in the trade register in 1911 as Hillebrand & Kracht OHG and is based in Werdohl, in the Sauerland region of Germany. For most of its history it was a medium-sized family company; in January 2024 it became part of the Atlas Copco Group, in the Power and Flow division.

Seven Star LLC lists KRACHT pumps, flow meters, valves and hydraulic motors, and sources them by type key for machinery and marine users in Oman.

KRACHT company profile

Founded 1911, registered as Hillebrand & Kracht OHG
Headquarters Werdohl, North Rhine-Westphalia, Germany; in today's premises since 1971
Ownership Atlas Copco Group since January 2024 (Power and Flow division, Power Technique business area); previously a family company
Size About 440 employees and revenue of about EUR 72 million in 2022, as reported by Atlas Copco
Subsidiaries USA, China and Hungary (KRACHT Hidraulik Kft.)
Product families External gear pumps for lube oil, fuel and process duty, VC and VZ gear flow meters, pressure and flow control valves, hydraulic motors and cylinders

Milestones

  • 1911: Hillebrand & Kracht OHG is entered in the trade register.
  • 1971: The company moves into its present premises in Werdohl.
  • 1992: A gear manufacturer in Hungary is acquired, today KRACHT Hidraulik Kft.
  • 2023–2024: Atlas Copco agrees to buy KRACHT in December 2023 and completes the deal in January 2024.

KRACHT pumps, flow meters and valves listed

The listing follows four product groups, pumps, fluid measurement, valves and drives:

  • Pump technology: KF gear pumps for transfer of lubricating and other fluids, the KF-F version for fuels, and KP high pressure gear pumps
  • Fluid measurement technology: gear type flow meters such as the VCA in aluminum
  • Valve technology: SPV and SPVF pressure relief valves, the DBD directly controlled poppet valve, HV and HVF pilot operated valves and the DV B hydraulically pilot controlled valve
  • Drive technology: KM hydraulic gear motors

Where KRACHT equipment is used

KRACHT equipment serves the marine, renewable energy, process technology and hydraulics industries. In practice that means lube oil and fuel oil transfer on engines, gearboxes and compressors, oil supply units, and metering of oils, resins, paints and other viscous media with gear flow meters in dosing and test bench systems. Enquiries from the GCC are mostly for a KRACHT pump or valve fitted to an imported machine or a ship's auxiliary system.

KRACHT products we list

Family Examples
Pumps BT / BTH Low-Speed Gear Pump, DT DuroTec Gear Pump for Abrasive Fluids, KD1 Gear Metering Pump, KF 0 Stainless Steel Process Gear Pump, KF Series Modular Gear Pump, KF-F Fuel Gear Pump Series, KF80RF2-D15 Gear Pump, KM Series Hydraulic Gear Motor and 2 more
Flowmeters Fluid Measurement Technology Series, SVC Screw Type Flow Meter, TM Turbine Flow Meter, VC 0.01 Micro Gear Type Flow Meter, VC Gear Type Flow Meter, VCA Aluminum Gear Flow Meter, VCM Gear Flow Meter
Safety Relief Valves DBD Directly Controlled Poppet Valve, DV B Hydraulically Pilot Controlled Valve, HV/HVF Pilot Operated Slide Valve, SPV 10 L1G 1 A 12 Pressure Relief Valve, SPV/SPVF Directly Controlled Slide Valve, Valve Technology Series
Hydraulic Valves & Components CNL Hydraulic Cylinder, DV S Pressure Stage Control Valve
Gear Units & Reducers Drive Technology Series

Ordering KRACHT parts: what we need

KRACHT products carry a type key on the nameplate that encodes size, direction of rotation, shaft end, housing and seal material, connections and special numbers. An example from this page is SPV 10 L1G 1 A 12. Send the complete key and the serial or order number shown with it. If the plate is damaged, send the fluid and viscosity, flow rate, operating pressure and temperature, drive speed, port type and size, and photos with main dimensions. For KRACHT flow meters add the measuring range and the pickup or electronics required. We compare the key with KRACHT documentation and supply the manufacturer's data sheet on request.

Frequently requested KRACHT models: KRACHT Pump Technology Series.

Facts checked against KRACHT company literature and Atlas Copco's acquisition announcements, October 2026.

FAQ

Questions about the KRACHT VCA Aluminum Gear Flow Meter

Answers from our engineering team on installation, compatibility and integration.

01How does the KRACHT VCA differ from the standard KRACHT VC gear flow meter?
The KRACHT VCA uses an aluminium body instead of the steel construction of the standard VC series, giving it lower installed weight and cost. It covers a smaller measuring range of 0.02 to 200 l/min at up to 240 bar, compared with the VC series which reaches 700 l/min at up to 480 bar, making the VCA the right choice when the highest pressure and temperature envelope is not required.
02What is the measuring range and pressure rating of the KRACHT VCA?
The KRACHT VCA aluminium gear flow meter measures 0.02 to 200 l/min at working pressures up to 240 bar and media temperatures from -10 to 80 degrees Celsius.
03What output signal does the KRACHT VCA gear flow meter provide?
The standard KRACHT VCA is fitted with a pulse output for direct connection to counters, totalizers, and PLC monitoring inputs, giving a straightforward signal for integration into existing monitoring panels.
04What applications is the KRACHT VCA best suited for?
The VCA is commonly specified for lube oil consumption monitoring, fuel consumption measurement on stationary and mobile diesel equipment, and general condition monitoring on hydraulic power units where a lightweight, cost-effective meter is preferred over the higher-pressure standard VC line.
05Is Seven Star LLC an experienced supply partner for KRACHT products?
Yes. Seven Star LLC is an experienced supplier of KRACHT in Oman and the GCC, supplying KRACHT flow meters and calibration support to hydraulic workshops and industrial maintenance teams throughout the Sultanate.