- Automation & ControlView all 2,610 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- HMI Displays
- Pneumatic Cylinders
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: ifm
ifm O5C500 Colour Sensor, RGB Light, Teach, 15-19 mm
Description
ifm O5C500 Colour Sensor, RGB Light, Teach, 15-19 mm
The ifm O5C500 is a colour sensor that recognises, sorts and checks objects by their colour. It lights the target with red, green and blue light (625, 525 and 465 nm) over a working range of 15 to 19 mm and is taught by button. The output is selectable PNP or NPN with automatic load detection, can be set to light-on or dark-on, carries 200 mA and switches at up to 2000 Hz with a response time below 0.3 s as listed.
The housing measures 56 x 18.2 x 46.8 mm and is protected to IP67 for -25 to 60 degrees Celsius. Seven Star LLC supplies the ifm O5C500 in Oman and the GCC as an independent supplier in Muscat.
O5C500 technical specifications
The table lists the values published by the manufacturer for the O5C500. Where a parameter has several operating modes, the headline value is shown; the full parameter list is in the manufacturer documentation.
| Parameter | Specification |
|---|---|
| Manufacturer / part number | ifm electronic / O5C500 |
| Range [mm] | 15 to 19 |
| Dimensions [mm] | 56 x 18.2 x 46.8 |
| Type of light | red light; green light; blue light |
| Wave length [nm] | 625; 525; 465 |
| Operating voltage [V] | 10 to 36 DC |
| Current consumption [mA] | 50 ((24 V)) |
| Electrical design | PNP/NPN (automatic load detection PNP/NPN) |
| Output function | light-on/dark-on mode (programmable) |
| Permanent current rating of switching output DC [mA] | 200 |
| Switching frequency DC [Hz] | 2000 |
| Response time [s] | < 0.3 |
| Ambient temperature [°C] | -25 to 60 |
| Protection | IP 67 |
| Weight [g] | 61.3 |
| Materials | housing: PA; bezel: stainless steel; operator interface: TPU / PC |
| Connector | 1 x M12; coding: A; Contacts: 5 |
| MTTF [years] | 491 |
How the O5C500 works
The O5C500 is a colour sensor. It illuminates the object in turn with red (625 nm), green (525 nm) and blue (465 nm) light and measures the reflected intensity of each, building a colour fingerprint of the target. During teach-in the sensor stores the fingerprint of a reference colour, and in operation the output switches when the measured colour lies within the taught tolerance. Because the evaluation is based on the relative response in three channels, it can tell similar shades apart where a simple brightness sensor would not. The working distance is 15 to 19 mm, so the object must pass within that narrow band, and a stable distance and surface finish matter for repeatable results.
Where the O5C500 fits and related parts
The O5C500 adds colour to the family of rectangular optical sensors that includes the O5P500 retro-reflective type. The O5D100 and O6H700 detect presence and distance rather than colour. Choose the O5C500 when the question is which colour, and a presence sensor when the question is whether anything is there.
Selection and ordering checklist for the O5C500
Work through the points below before you confirm the order, so that the O5C500 you receive is the one your machine or plant needs.
- Define the colours and the smallest difference to be detected
- Confirm the 15 to 19 mm working distance can be held mechanically
- Check the supply 10 to 36 V DC and the 50 mA consumption at 24 V
- Check that the automatic PNP/NPN detection suits your input
- Select a fixing bracket and cordset
The manufacturer lists this article under the type designation Colour sensor, O5C-MAKG/US100. The article number O5C500 is the reference to quote when ordering, and the type designation is useful for technicians who compare the label on an installed unit.
Installation, commissioning and maintenance
Mount the sensor on a rigid bracket so that the distance to the object stays inside the 15 to 19 mm window, and avoid tilting it relative to a glossy surface. Teach the reference colour with the object in its normal position, then present a few samples to check the tolerance. Shield the sensing area from direct sunlight if the machine is open. Clean the front lens with a soft cloth and keep a record of the taught result for repeat set-up after replacement.
Typical applications in Oman and the GCC
Sorting of coloured closures and labels, checking of cable and wire colours, verification of packaging and coloured plastic parts. In Oman and the GCC it suits packaging and assembly lines that need a quick colour check without a vision system.
Optical sensors on open conveyors and loading areas meet dust, sand and strong sunlight. Regular lens cleaning, a firm bracket and a check of the switching point after any mechanical change keep detection reliable.
O5C500 compared with related ifm types
The table places the O5C500 next to neighbouring types in the same application group, so you can see whether a sibling would suit the job better.
| Part number | Key characteristics | Note |
|---|---|---|
| O5C500 | Colour sensor, RGB LED, 15-19 mm, 2 kHz | This page |
| O5P500 | Retro-reflective, red light, 250 mm spot, 2 kHz | Related type |
| OGP500 | M18 stainless, retro-reflective, 200 mm spot, 80 C | Related type |
| O8H200 | Miniature, 3-15 mm, 4 mm spot, IO-Link | Related type |
| O5D100 | Compact distance sensor | Related type |
| O6H700 | Background suppression sensor | Related type |
| OGH580 | M18 stainless diffuse sensor | Related type |
Information to send with an RFQ for the O5C500
To prepare an accurate offer for the O5C500, please include the following with your enquiry:
- Object colours to be distinguished and the surface finish
- Working distance and variation of the distance
- Line speed and the required switching frequency
- Supply voltage and PNP or NPN input type
- Cordset or fixing bracket requirements
Documents and quotation
The official ifm data sheet for the O5C500 (document O5C500-00, English, issued 13 April 2023) is attached on this page as a PDF. It sets out the electrical data, the output function, the operating conditions, the approvals and the dimension drawing for this article. Check these values and the wiring diagram against your application before ordering, then send us the quantity and the delivery location for a quotation.
Seven Star LLC is an independent supplier in Muscat serving Oman and the GCC and is not affiliated with the manufacturer; the name ifm is used only to identify the product. Prices are not shown on the page, so send the part number, the quantity and the delivery location to receive a quotation.
Datasheets & Documents
- Datasheet ifm O5C500 Data Sheet (PDF) Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
ifm is a German family-owned maker of sensors and automation products, founded in Essen in October 1969 by Robert Buck and Gerd Marhofer. Its first products were inductive proximity sensors sold under the efector name. ifm is still headquartered in Essen, and the founders' sons, Martin Buck and Michael Marhofer, have led it since 2001.
Seven Star LLC lists ifm position, distance and pressure sensors and supplies them by exact article number to plants and machine builders in Oman and the wider Gulf region.
ifm company profile
| Founded | 1969, Essen, Germany |
|---|---|
| Founders | Robert Buck and Gerd Marhofer |
| Headquarters | Essen, Germany |
| Ownership | Family-owned |
| Product families | Inductive and capacitive proximity sensors, PN pressure sensors, O1D laser distance sensors, flow and level sensors, IO-Link masters |
Milestones
- 1969: ifm is founded in Essen.
- 2001: The founders' sons take over management.
ifm sensors listed on this page
ifm identifies every device with a short article number, and that number is what we order against. Three are listed here:
- O1D100: laser distance sensor for position and distance measurement
- PN7093: pressure sensor with local display
- NG5021: inductive proximity sensor with NAMUR output
Other ifm inductive sensors, pressure sensors and connection cables can be quoted on request when you send the article number.
ifm products we list
Ordering ifm sensors: what we need
Send the six-character article number printed on the housing (two letters and four digits, or similar). If the label is worn, a photo plus the thread size, sensing range, output type and connector style is enough for us to check the part against ifm documentation. For NAMUR sensors, tell us which isolating amplifier is in the loop. Buyers in the GCC who need a successor for a discontinued article can send the old number and we will check the replacement the manufacturer names.
Facts checked against ifm's own 50-year chronicle (ifm.com), October 2026.
Browse ifm products by category: Sensors & Transmitters, Pressure Instrumentation.
FAQ
Questions about the ifm O5C500 Colour Sensor, RGB Light, Teach, 15-19 mm
Answers from our engineering team on installation, compatibility and integration.
01How does the ifm O5C500 recognise colour?
It uses red, green and blue light at 625, 525 and 465 nm and compares the reflected response with a taught reference.
02What is the working range of the O5C500?
15 to 19 mm. This is the value published by the manufacturer for the O5C500; confirm details before ordering.
03How fast does the O5C500 switch?
The switching frequency is 2000 Hz. This is the value published by the manufacturer for the O5C500; confirm details before ordering.
04How is the O5C500 set up?
By teach-in, which stores the colour to be detected.
05What protection does the O5C500 have?
IP67 in a 56 x 18.2 x 46.8 mm housing. This is the value published by the manufacturer for the O5C500; confirm details before ordering.


















Reviews
There are no reviews yet.