- Automation & ControlView all 2,610 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- HMI Displays
- Pneumatic Cylinders
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: ifm
ifm KQ5101 Capacitive Sensor Flat 20x7x48, 12 mm, IO-Link
Description
ifm KQ5101 Capacitive Sensor Flat 20x7x48, 12 mm, IO-Link
The ifm KQ5101 is a flat capacitive sensor in a 20 x 7 x 48 mm body with a non-flush sensing range of 12 mm. It is meant for position detection or level monitoring through the wall of a non-metallic container, and the output can be programmed as normally open or normally closed. The PNP output carries 100 mA, the switching frequency is 10 Hz and an IO-Link interface is available.
The sensor leaves the housing on a 0.1 m PUR cable, is protected to IP65, IP67 and IP69K and operates from -25 to 80 degrees Celsius. Seven Star LLC supplies the KQ5101 in Oman and the GCC as an independent supplier in Muscat.
KQ5101 technical specifications
The table lists the values published by the manufacturer for the KQ5101. Where a parameter has several operating modes, the headline value is shown; the full parameter list is in the manufacturer documentation.
| Parameter | Specification |
|---|---|
| Manufacturer / part number | ifm electronic / KQ5101 |
| Sensing range [mm] | 12 |
| Dimensions [mm] | 20 x 7 x 48 |
| Mounting | non-flush mountable |
| Real sensing range Sr [mm] | 12 ± 10 % |
| Hysteresis [% of Sr] | 1 to 15 |
| Operating voltage [V] | 10 to 30 DC |
| Current consumption [mA] | < 17 |
| Electrical design | PNP |
| Output function | normally open / normally closed (selectable) |
| Permanent current rating of switching output DC [mA] | 100 |
| Switching frequency DC [Hz] | 10 |
| Communication interface | IO-Link |
| Ambient temperature [°C] | -25 to 80 |
| Protection | IP 65; IP 67; IP 69K |
| Weight [g] | 27.4 |
| Materials | housing: PBT; LED window: TPE-U; inserts: stainless steel (316L / 1.4404) |
| Connector | 1 x M12; coding: A; Contacts: 3 |
| Cable | 0.1 m, PUR, Ø 2.9 mm |
| MTTF [years] | 771 |
How the KQ5101 works
The KQ5101 is a compact capacitive proximity sensor. Its electrode builds up an electric field in front of the sensing face, and when material with a different dielectric constant enters the field, the capacitance changes and the output switches. This lets the sensor detect liquids and dry bulk material through a non-metallic container wall, or on a bypass pipe, without contact. The sensitivity can be taught through the pushbuttons to ignore the container wall.
Where the KQ5101 fits and related parts
The KQ5101 is a flat type for mounting against a tank wall, while the KI5083 and KG5065 are threaded barrel types for in-wall mounting. The KQ6005 is another capacitive sensor in our range. For high medium temperatures, see the KI5301.
Selection and ordering checklist for the KQ5101
Work through the points below before you confirm the order, so that the KQ5101 you receive is the one your machine or plant needs.
- Check the wall material and wall thickness of the container
- Check the 12 mm range against the wall plus gap
- Choose normally open or normally closed behaviour
- Check the 0.1 m PUR cable and plan the connector or junction
- Decide whether IO-Link parameterisation is wanted
The manufacturer lists this article under the type designation Capacitive sensor, KQ-3120NFPKG/0,1M/US. The article number KQ5101 is the reference to quote when ordering, and the type designation is useful for technicians who compare the label on an installed unit.
Installation, commissioning and maintenance
Fix the sensor on the container wall with the mounting adapter or cable ties so the sensing face contacts the wall, at the height of the level to be detected. At commissioning, use the teach function with the container empty and then full, check the switching, and lock the settings with the electronic lock. Deposits on the inside wall or condensation can influence the switching, so recheck sensitivity after changes in the product.
Fix the sensor flat against the outside of the wall with the mounting adapters or cable ties, teach the empty and full states and watch for foam or condensation that could create false switching. The 10 Hz rate is meant for level and slow position, not for fast counting.
Typical applications in Oman and the GCC
Liquid level detection in plastic or glass tanks, dosing containers and cabinets. In Oman and the GCC non-contact sensing avoids drilling into water treatment and chemical dosing tanks.
Non-contact sensors on plastic tanks suit sites where drilling a vessel is not allowed. Heat and condensation on the wall can shift the switching point, so teach the sensor at normal operating conditions.
KQ5101 compared with related ifm types
The table places the KQ5101 next to neighbouring types in the same application group, so you can see whether a sibling would suit the job better.
| Part number | Key characteristics | Note |
|---|---|---|
| KQ5101 | Flat 20x7x48, 12 mm, IO-Link, 0.1 m cable | This page |
| KI5083 | M30 non-flush, 20 mm, L 90, IO-Link | Related type |
| KG5065 | M18 non-flush, 12 mm, L 87, PNP/NPN auto, IO-Link | Related type |
| KI5301 | M30 non-flush, 0.5-40 mm adj., medium to 110 C | Related type |
| KQ6005 | Capacitive sensor in our range | Related type |
Information to send with an RFQ for the KQ5101
To prepare an accurate offer for the KQ5101, please include the following with your enquiry:
- Container material and wall thickness
- Medium to be detected
- Mounting position and space
- Output polarity and cordset
- Quantity and delivery location
Storage, handling and spares for the ifm KQ5101
Keep ifm KQ5101 units in their original packaging until they are mounted. Store them indoors in a dry, dust-free room, away from direct sun and condensation. Panel shops in Oman and the GCC often hold stock in warehouses that get very hot in summer, so check that storage temperature stays within the limits given in the manufacturer datasheet.
- Check the label and order code on every unit against the drawing before it goes into the panel.
- Use the correct tool and tightening torque for the terminals, as given in the instructions supplied with the product.
- Keep a small number of spare units for each rating used on site, so that a failed or damaged part can be replaced without waiting for a new shipment.
- Record the order code in the panel documentation and the as-built drawings, so that maintenance teams can reorder the same part later.
When you plan spares for a project, group the ifm KQ5101 with the other parts of the same panel in one RFQ. This keeps delivery dates aligned and makes it easier to confirm stock for the whole bill of materials at once.
Documents and quotation
The official ifm data sheet for the KQ5101 (document KQ5101-02, English, issued 11 August 2026) is attached on this page as a PDF. It sets out the electrical data, the output function, the operating conditions, the approvals and the dimension drawing for this article. Check these values and the wiring diagram against your application before ordering, then send us the quantity and the delivery location for a quotation.
Seven Star LLC is an independent supplier in Muscat serving Oman and the GCC and is not affiliated with the manufacturer; the name ifm is used only to identify the product. Prices are not shown on the page, so send the part number, the quantity and the delivery location to receive a quotation.
Other Models in the Ifm61 Cap Range
Seven Star LLC supplies models from the Ifm61 Cap range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.
| Model | Category | |
|---|---|---|
| ifm KQ5101 Capacitive Sensor Flat 20x7x48, 12 mm, IO-Link | Automation Accessories | You are viewing this model |
| ifm KI5083 Capacitive Sensor M30, 20 mm Non-Flush, IO-Link | Automation Accessories | View details |
| ifm KG5065 Capacitive Sensor M18, 12 mm Non-Flush, PNP/NPN | Automation Accessories | View details |
| ifm KI5301 Capacitive Sensor M30, 110 C Medium, IO-Link | Automation Accessories | View details |
Datasheets & Documents
- Datasheet ifm KQ5101 Data Sheet (PDF) Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
ifm is a German family-owned maker of sensors and automation products, founded in Essen in October 1969 by Robert Buck and Gerd Marhofer. Its first products were inductive proximity sensors sold under the efector name. ifm is still headquartered in Essen, and the founders' sons, Martin Buck and Michael Marhofer, have led it since 2001.
Seven Star LLC lists ifm position, distance and pressure sensors and supplies them by exact article number to plants and machine builders in Oman and the wider Gulf region.
ifm company profile
| Founded | 1969, Essen, Germany |
|---|---|
| Founders | Robert Buck and Gerd Marhofer |
| Headquarters | Essen, Germany |
| Ownership | Family-owned |
| Product families | Inductive and capacitive proximity sensors, PN pressure sensors, O1D laser distance sensors, flow and level sensors, IO-Link masters |
Milestones
- 1969: ifm is founded in Essen.
- 2001: The founders' sons take over management.
ifm sensors listed on this page
ifm identifies every device with a short article number, and that number is what we order against. Three are listed here:
- O1D100: laser distance sensor for position and distance measurement
- PN7093: pressure sensor with local display
- NG5021: inductive proximity sensor with NAMUR output
Other ifm inductive sensors, pressure sensors and connection cables can be quoted on request when you send the article number.
ifm products we list
Ordering ifm sensors: what we need
Send the six-character article number printed on the housing (two letters and four digits, or similar). If the label is worn, a photo plus the thread size, sensing range, output type and connector style is enough for us to check the part against ifm documentation. For NAMUR sensors, tell us which isolating amplifier is in the loop. Buyers in the GCC who need a successor for a discontinued article can send the old number and we will check the replacement the manufacturer names.
Facts checked against ifm's own 50-year chronicle (ifm.com), October 2026.
Browse ifm products by category: Sensors & Transmitters, Pressure Instrumentation.
FAQ
Questions about the ifm KQ5101 Capacitive Sensor Flat 20x7x48, 12 mm,
Answers from our engineering team on installation, compatibility and integration.
01What sensing range does the ifm KQ5101 have?
12 mm, non-flush, at a nominal real sensing range of 12 mm plus or minus 10 percent.
02Does the KQ5101 support IO-Link?
Yes, the communication interface is IO-Link. This is the value published by the manufacturer for the KQ5101; confirm details before ordering.
03What are the dimensions of the KQ5101?
20 x 7 x 48 mm. This is the value published by the manufacturer for the KQ5101; confirm details before ordering.
04What protection does the KQ5101 have?
IP65, IP67 and IP69K. This is the value published by the manufacturer for the KQ5101; confirm details before ordering.
05How fast does the KQ5101 switch?
10 Hz, which is suitable for level and slow position detection.


















Reviews
There are no reviews yet.