- Automation & ControlView all 2,488 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- CCTV & Security
- Encoders
- Motor Soft Starters
- Safety Switches & Guard Locking
- HMI Displays
- Pneumatic Cylinders
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Fluke
Fluke 714B Thermocouple Temperature Calibrator
Description
714B thermocouple temperature calibrator for 17 thermocouple types
The Fluke 714B is a single-function thermocouple calibrator that measures and simulates seventeen thermocouple types and millivolts. It also measures 4 to 20 mA signals while sourcing a temperature signal, which lets one connection check a thermocouple transmitter from input to output. Seven Star LLC supplies the 714B in Oman and the GCC as an independent supplier in Muscat, not affiliated with the manufacturer.
The ordering list shows “FLUKE-714B Temperature Calibrator”. It shares its datasheet with the RTD version, the 712B.
714B technical specifications
| Parameter | Specification |
|---|---|
| Manufacturer / part number | Fluke / 714B |
| Thermocouple types | 17: E, N, J, K, T, B, R, S, C, L, U, BP, XK, G, D, P and M |
| Type K accuracy (1 year, measure) | 0.3 °C from -100 °C to 400 °C; 0.5 °C from 400 °C to 1200 °C; 0.7 °C from 1200 °C to 1372 °C |
| Type K accuracy (1 year, source) | 0.3 °C from -100 °C to 1372 °C; 0.4 °C from -200 °C to -100 °C |
| Type T accuracy (1 year, measure) | 0.3 °C from 0 °C to 400 °C; 0.6 °C from -200 °C to 0 °C |
| Millivolts measure and source | -10 mV to 75 mV, 0.01 mV resolution, 0.015 % + 10 µV |
| Thermocouple connector | Miniature thermocouple connector; plug kits 700TC1 and 700TC2 are listed as accessories |
| DC mA measure | 0 to 24 mA, 0.001 mA resolution, 0.010 % + 2 µA |
| Dual inputs / display | Measure mA while sourcing temperature; backlit display |
| Source functions | Configurable 0 % and 100 % points, linear ramp and 25 % step |
| Pulsed transmitters | Supports pulse times as short as 5 ms |
| Calibration basis | One-year cycle, +18 °C to +28 °C, 5 minute warm-up; 1-year and 2-year specifications |
| Maximum voltage | 30 V between any terminals or to earth |
| Operating / storage temperature | -10 °C to 50 °C / -30 °C to 60 °C |
| IP rating / drop | IP52 / 1 m |
| Batteries | Four AA alkaline |
| Size / weight | 52.5 x 84 x 188.5 mm / 515 g |
| Supplied with | Magnetic hanging tool, batteries, manual, traceable calibration certificate, test leads |
How the 714B deals with cold junction and sensor type
A thermocouple generates a voltage proportional to the temperature difference between its hot junction and the reference junction at the instrument. When simulating a thermocouple, the 714B outputs the millivolt value for the chosen type and temperature, so a transmitter or controller input can be tested without a furnace. Selecting the wrong type gives a plausible but incorrect reading, so match the type to the instrument configuration, and keep the plug and connector free from drafts so the reference junction temperature is stable.
Accuracy depends on type and range. For example, type R and S have lower accuracy at low temperature and near the top of the range, type B is not stated below 600 °C, and type K and N are better than 1 °C over most of their ranges. Always read the table for your type and range.
Mini-plug kits and probes for the 714B
The datasheet lists thermocouple plug kits: 700TC1 with ten mini-plug connectors in several types, and 700TC2 with seven mini-plugs. It also lists a range of thermocouple probes (80PK series), including bead, immersion, surface, air and piercing types, for use as measuring probes in the field. Order these only if you need to measure temperature in the plant as well as simulate it.
The calibrator also helps when verifying extension wire and compensating cable. Simulate a temperature at the sensor end of the cable, then read the value at the control room; any difference points to wiring, the wrong type of cable or a poorly configured input card. Because 4 to 20 mA is measured at the same time, the same test shows whether the transmitter scaling matches the intended range.
Selecting the 714B
- Check that the thermocouple type of your instruments is among the seventeen.
- Confirm the accuracy table for the temperature range you calibrate.
- Choose the 712B if your sensors are RTDs.
- Add plug kits or probes if you need to connect to bare thermocouple wire.
- Note the 30 V maximum input and the 1 m drop requirement.
Use and maintenance of the 714B
Allow a five-minute warm-up and a few minutes for the connector temperature to stabilise after you plug in thermocouple wires, because a temperature gradient across the connector causes cold junction error. Keep the unit away from drafts and heat sources while working. Recalibrate on a one-year cycle if your system requires the stated specifications, and use the traceable certificate supplied with the unit as the first record.
Typical applications of the 714B in Oman and the GCC
Thermocouples are everywhere in furnaces, fired heaters, turbines and exhaust systems, so the 714B is used for turbine exhaust temperature loops, heater skin and tube metal temperature monitors, boiler flue gas and kiln controls. Technicians simulate the thermocouple at the junction box, read the transmitter or DCS value and correct the loop. In hot outdoor junction boxes, give the calibrator time to match the box temperature before taking critical readings.
Information to send with an RFQ for the 714B
- Part number 714B
- Quantity and any thermocouple plug kits or probes
- Thermocouple types and ranges to be calibrated
- Delivery location and time frame
- Calibration certificate requirement
Storage, handling and spares for the Fluke 714B
Keep the Fluke 714B in its carrying case when it is not in use, and store it in a clean, dry place. Remove or charge the batteries as recommended in the user manual before long storage. Field teams in Oman and the GCC should avoid leaving the instrument in a vehicle in the sun, as high cabin temperatures can exceed the storage range and shorten battery life.
- Check the instrument, cables, hoses or lenses for damage before each job.
- Clean the unit with a soft, slightly damp cloth only; do not use solvents unless the manual allows them.
- Plan a calibration interval that matches your quality system, and keep the calibration certificate with the asset record.
- Order wear parts and accessories, such as batteries, test leads, hoses or adapters, together with the instrument.
For calibration and test work, it helps to state in your RFQ whether you need an accredited calibration certificate with the Fluke 714B, so the right documents can be confirmed with the quotation.
Documents and quotation
A datasheet for the 714B and 712B is attached on this page.
Send us the part number 714B and the quantity and we will confirm availability and a quotation.
Other Models in the Fluke 71xb Calibrator Range
Seven Star LLC supplies models from the Fluke 71xb Calibrator range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.
| Model | Category | |
|---|---|---|
| Fluke 712B RTD Temperature Calibrator | Process, Pressure & Temperature Calibrators | View details |
| Fluke 714B Thermocouple Temperature Calibrator | Process, Pressure & Temperature Calibrators | You are viewing this model |
Datasheets & Documents
- Datasheet Fluke 714B Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
Fluke is the American maker of handheld electronic test tools: digital multimeters, clamp meters, insulation testers, process calibrators, thermometers, vibration meters and power quality analysers. John Fluke founded the John Fluke Engineering Company in Springdale, Connecticut, in June 1948 and moved it to Seattle in 1952. Fluke is headquartered in Everett, Washington, was acquired by Danaher in 1998 and has been part of Fortive since Fortive's spin-off from Danaher in 2016.
Seven Star LLC lists Fluke process calibrators, electrical test tools and bench calibrators, and sources them for maintenance teams and calibration laboratories in Oman.
Fluke company profile
| Founded | June 1948, Springdale, Connecticut, USA, as the John Fluke Engineering Company |
|---|---|
| Founder | John M. Fluke Sr. |
| Headquarters | Everett, Washington, USA (moved to the Seattle area in 1952) |
| Ownership | Danaher from 1998; part of Fortive (NYSE: FTV) since July 2016 |
| Product families | Digital multimeters and clamp meters, insulation resistance testers, process and loop calibrators, infrared thermometers and thermal imagers, vibration meters, power quality analysers, Fluke Calibration laboratory standards |
Milestones
- 1948: John Fluke starts the company in Springdale, Connecticut.
- 1952: The company moves to Seattle
- 1987: A joint venture with Philips leads to the ScopeMeter handheld oscilloscope.
- 1998: Danaher acquires Fluke.
- 2016: Fluke becomes part of Fortive, spun off from Danaher in July.
Fluke calibrators and test tools listed
The main Fluke products on this page fall into three groups, besides other test tools such as further multimeters, a thermometer, an anemometer, a vibration tester and a portable appliance tester:
- Process tools: the 754 documenting process calibrator with HART, 789 ProcessMeter, 721 dual sensor pressure calibrator and 729 automatic pressure calibrator
- Electrical test: the 376 FC true-RMS clamp meter with iFlex probe and the 1587 FC insulation multimeter
- Fluke Calibration bench standards: 5522A, 5502A, 5500A and 5080A multi-product calibrators, the 5720A multifunction calibrator, 8508A reference multimeter, 6100A electrical power standard and 9640A RF reference source
Several of the bench models belong to earlier generations. When a model is no longer produced, we check the manufacturer's documentation and propose the successor it names.
Where Fluke instruments are used
Fluke process calibrators are used for loop checks, transmitter calibration and valve tests in oil and gas, power and water plants. Clamp meters and insulation testers serve electrical maintenance on motors, switchgear and cables. The bench calibrators and reference multimeters are the working standards of electrical calibration laboratories in the GCC, where they calibrate multimeters, clamp meters, process tools and power analyzers.
Fluke products we list
Ordering Fluke instruments: what we need
Send the exact model with its suffix, since versions differ. A Fluke 721, for example, is defined by its two pressure ranges, and a 729 by its maximum pressure. For bench calibrators, list the options you need, such as oscilloscope calibration or power quality options, the line voltage, and the type of calibration certificate you require from the manufacturer. For Fluke multimeters and clamp meters, add the kit contents wanted, such as probes, leads or cases.
Frequently requested Fluke models: Fluke 5522A Multi-Product Calibrator.
Facts checked against published histories of Fluke Corporation and Fortive, October 2026.
Browse Fluke products by category: Portable Test & Measurement.
FAQ
Questions about the Fluke 714B Thermocouple Temperature Calibrator
Answers from our engineering team on installation, compatibility and integration.
01How many thermocouple types does the Fluke 714B support?
The 714B measures and simulates seventeen thermocouple types and millivolts. They include E, N, J, K, T, B, R, S, C, L, U, BP, XK, G, D, P and M.
02Can the Fluke 714B measure mA?
Yes. It measures 0 to 24 mA with 0.010 % + 2 microamp accuracy while it sources a temperature signal. This checks a thermocouple transmitter in a single connection.
03What is the millivolt range of the Fluke 714B?
The 714B measures and sources from -10 mV to 75 mV with 0.01 mV resolution and an accuracy of 0.015 % of reading plus 10 microvolts.
04What accessories are listed for the Fluke 714B?
The datasheet lists thermocouple plug kits 700TC1 and 700TC2 and several 80PK series probes. The calibrator itself includes a magnetic hanging tool and test leads.
05How often should the Fluke 714B be calibrated?
The specifications are based on a one-year calibration cycle, and two-year values are also given. Your own quality system should decide the actual interval.


















Reviews
There are no reviews yet.