Brand: JUMO

JUMO dTRANS T06 Ex Four-Wire Transmitter with SIL and Ex Approval

Name: JUMO dTRANS T06 Ex SIL Transmitter 707075 | Seven Star LLC
Brand: JUMO
SKU: dTRANS T06 Ex

Description

Multifunction four-wire transmitter with intrinsically safe input and SIL data

The JUMO dTRANS T06 Ex (type 707075) is a DIN-rail multifunction transmitter that measures RTD probes, thermocouples, resistance signals, voltage and current, and outputs 0(4) to 20 mA or 0 to 10 V galvanically isolated from the intrinsically safe sensor circuit. It is designed to DIN EN 61508 SIL2, with systematic capability SC 3 for hardware and software, and offers PL c or d per ISO 13849 depending on architecture.

A 64 x 96 pixel graphic display with backlight shows the measured value, a 2-color LED shows the operating status, and four keys or a micro-USB port with the setup program handle configuration. The data sheet states that the device itself must be installed outside the Ex area, while the [Ex ia] inputs connect directly to approved probes, so no extra barrier is needed.

The sensor type, range, linearization, output and limit values are all configurable, and customer-specific linearization is supported.

Technical specifications

Parameter	Specification
Type	707075; transmitter with SIL and PL approval; 22.5 mm DIN-rail housing
RTD inputs	Pt50, Pt100, Pt500, Pt1000, Ni100/500/1000, Cu50, Cu100 (several standards); Pt100 -200 to +850 °C, +/-0.4 K (2/3-wire), +/-0.2 K (4-wire)
Thermocouples	L, J, U, T, K, E, N, S, R, B, C, A1, D, Platinel II, GOST types; accuracy 0.1 % to 0.25 %; cold junction internal or fixed -20 to +80 °C
Other inputs	Resistance transmitter up to 10000 Ohm; potentiometer up to 10 kOhm; 0 to 1 V, 0 to 10 V; 0(4) to 20 mA
Line resistance	Up to 50 Ohm per line (3/4-wire); up to 100 Ohm in 2-wire
Output	0(4) to 20 mA (load up to 500 Ohm) or 0(2) to 10 V (load 500 Ohm or more); D/A resolution above 15 bit; accuracy 0.05 %
Sampling / filter	500 ms; 2nd-order filter 0 to 100 s
Intrinsically safe input data	Uo 6.0 V; Io 13.3 mA; Po 19.9 mW; Co 39.32 uF; Lo 0.2 H
Supply	DC 24 V +10/-15 % SELV or PELV; max. 3 W
Interface	Micro-USB setup; optional RS485 Modbus RTU slave (extra code 053)
Approvals as printed	TUV Nord SIL2 and PL c (SEBS-A.20140509.0933409); ATEX i (TUV 19 ATEX 244073 X); ATEX h; IECEx i (IECEx TUN 19.0005X)
Ex marking	II (1) G [Ex ia Ga] IIC; II (1) D [Ex ia Da] IIIC
Environment	-10 to +70 °C operation; -20 to +80 °C storage; max. 85 % humidity; max. 2000 m; indoor use
Housing	Polycarbonate UL 94 V0; DIN rail 35 mm; close mounting permitted; IP20; vertical; approx. 200 g; terminals up to 2.5 mm2

Order code, probes and safety use

The order code is 707075/ version (8 standard, 9 customer-specific) – supply (29 for DC 24 V) – extra codes (000 none, 053 RS485 Modbus RTU), for example 707075/8-29-053. Delivery includes the device and operating manual; accessories are the setup program, a 3 m USB cable and a screw-on end clamp.

JUMO probes to data sheet 902820 are type-tested for use in Ex areas with this transmitter, and the safety manual describes the values. The probes also have to be qualified for the Ex area. With SIL data, SIL2 or PL c is reached with a single device (HFT 0) and SIL3 or PL d with two devices (HFT 1), depending on the architecture.

If an RS485 interface is ordered, the transmitter operates as a Modbus RTU slave, which lets a PLC read the measured value digitally alongside the analog output. The setup program and the front keys access the same parameters, and noise suppression, filter time, offset and fine adjustment can be set for every input variant.

Installation notes and applications

Use it where a temperature signal from a hazardous area must enter a SIL-rated loop, such as reactor jackets, storage tanks, gas processing skids and dryers. Besides the display, it offers a min/max drag pointer, operating hours counter, output simulation and a connection diagram on the screen, which helps loop checks.

The data sheet warns that terminal temperatures may exceed 60 °C, so connected cables must be heat-resistant to at least 80 °C. Emission class A means it is for industrial use only. Always check the approvals against the project and the certificate versions before ordering.

Fault handling is configurable: the outputs take defined states if a measuring fault occurs, and under NAMUR NE 43 the 4 to 20 mA signal reports “NAMUR Low” at 3.6 mA or below and “NAMUR High” at 21 mA or above. For double thermocouples the unit detects probe short circuit as well, which single thermocouples do not permit.

Always follow the safety manual and the certificates for the Ex area. The device is installed outside the hazardous area, while the sensor and its connection lead are in the Ex zone; cable capacitance and inductance must stay within the output values of Co 39.32 uF and Lo 0.2 H.

Documents and quotation

For engineering details, open the attached PDF (JUMO dTRANS T06 Ex data sheet 707075 V2.00 (EN)). When you are ready to buy, submit the order code and project requirements through the request form, and our team will confirm what can be supplied and when. Browse the category Temperature Instrumentation for alternatives.

Datasheets & Documents

Datasheet JUMO dTRANS T06 Ex data sheet 707075 V2.00 (EN) Download

Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

About brand

JUMO is the German maker of temperature sensors, process controllers, pressure transmitters and liquid analysis instruments. Moritz Kurt Juchheim founded it in Fulda in 1948 as M. K. Juchheim KG, making glass thermometers with six employees. The name JUMO comes from the founder's name. It is still a family company headquartered in Fulda, and the parent company has been called JUMO GmbH & Co. KG since 2003.

Seven Star LLC is an independent supplier in Muscat. We list JUMO RTD and thermocouple probes, thermowells, transmitters, controllers, recorders and water analysis instruments, and supply them to process plants, OEMs, HVAC contractors and water utilities in Oman and the GCC by type number.

JUMO company profile

Established	1948, Fulda, Germany, by Moritz Kurt Juchheim
First products	Glass and contact thermometers; platinum glass sensors from 1966
Ownership	Family-owned; renamed JUMO GmbH & Co. KG in 2003
Product families	RTD and thermocouple probes, thermowells, temperature and pressure transmitters, controllers and thermostats, safety temperature limiters, paperless recorders, liquid analysis and flow and level instruments

Milestones

1948: Moritz Kurt Juchheim founds M. K. Juchheim KG in Fulda, making glass thermometers with six employees.
1966: Platinum glass temperature sensors are added.
2003: The parent company is renamed JUMO GmbH & Co. KG.

JUMO products we list

Family	Models	Typical use
RTD and thermocouple probes	902020, 902030, 902050, 902120, 902006 2xPt100, PROCESStemp, mineral-insulated RTD, 901020 thermocouple, 901210, 902810 hygienic, 902550 surface, 902520 HVAC, MarineTemp	Temperature measurement in pipes, vessels, machines, HVAC and food plants
Thermowells and inserts	909710 thermowells, 909740 measuring inserts	Protecting sensors and replacing them without opening the process
Temperature transmitters	dTRANS T01, T03, T04, T05, T06 SIL, T07 HART, T09, T1000 IO-Link, DELOS T switch	Converting sensor signals to 4-20 mA, HART or IO-Link
Pressure and level	dTRANS p20, p30, p31 hygienic, p33 Ex, p02 DELTA, MIDAS S05, MIDAS DP10, DELOS S02, MAERA S25, NESOS R20	Pressure in process, hydraulic and OEM systems; tank and well level
Controllers, limiters and recorders	DICON touch, IMAGO 500, dTRON 316, iTRON, cTRON, diraTRON 104, eTRON T, safetyM STB/STW, safetyM TB/TW, LOGOSCREEN 601, mTRON T	Furnace, oven and process control, over-temperature protection and recording
Liquid analysis and flow	AQUIS touch S, AQUIS touch P, AQUIS 500 pH, AQUIS 500 CR, dTRANS pH 02, pH electrode, digiLine DO, ecoLine NTU, flowTRANS MAG H20, flowTRANS US W01	pH, conductivity, oxygen and turbidity in water treatment; liquid flow

Choosing a temperature sensor starts with the range and accuracy. A Pt100 RTD is accurate and stable from about -200 to 600 °C and is the usual choice in process plants. A thermocouple (type K or J, for example) covers much higher temperatures and responds faster but is less accurate. The wiring also matters: a 3-wire or 4-wire Pt100 connection cancels the resistance of the cable, while a 2-wire connection adds an error that grows with cable length. That is why a head-mounted transmitter is often fitted close to the sensor.

Where JUMO products are used

In Oman and the GCC, JUMO sensors and controllers are used in oil and gas and chemical plants, food and beverage production, plastics and metal heat treatment, HVAC and district cooling, water and wastewater treatment, swimming pools and marine applications.

Ordering JUMO products: what we need

Send the JUMO type number and the full order code from the label (for example 902020/10-...). For probes, add the sensor type (Pt100, Pt1000, type K or J), the number of wires, the insertion length and diameter, and the process connection. For controllers, add the input, outputs and supply voltage.

Facts checked against JUMO's company history, October 2026.

Browse JUMO products by category: Temperature Instrumentation, Pressure Instrumentation, Liquid Analysis Sensors, Controllers & Data Acquisition, Level Transmitter.