Brand:

Servomex Micro i.s. 5100 Portable Oxygen Analyzer

Description

Overview

The Servomex Micro i.s. 5100 Portable Oxygen Analyzer is a compact, intrinsically safe instrument engineered for spot-checking and continuous monitoring of oxygen concentration in potentially explosive atmospheres. Certified to ATEX Category 1 (Zone 0), IECEx, and cus standards, the Micro i.s. 5100 is one of the few portable analyzers rated for use in the most hazardous Zone 0 locations, giving plant personnel confidence when verifying inert gas purging, tank atmospheres, and confined space entry conditions where flammable vapors may be present alongside the oxygen being measured.

Seven Star LLC supplies the Servomex Micro i.s. 5100 as an experienced supply partner to end users across Oman and the wider GCC, supporting oil and gas, petrochemical, and marine operators who need dependable, factory-calibrated instruments backed by genuine spare parts and applications assistance.

Measurement and Operating Principle

The Micro i.s. 5100 uses Servomex’s proven paramagnetic oxygen sensing technology, which exploits the unique paramagnetic susceptibility of oxygen molecules to generate a highly stable, drift-resistant signal without consuming the sample or relying on a limited-life electrochemical cell. This approach delivers long-term measurement stability and eliminates the periodic cell replacement costs associated with older galvanic oxygen sensors, reducing total cost of ownership for operators running frequent hazardous-area inspections.

An internal sample pump draws gas through the sensor for pumped operation, while the analyzer can also be configured for non-pumped, ambient diffusion sampling depending on the application. Readings are displayed on an intuitive, engineer-friendly interface capable of storing up to 200 measurements for later download and review, supporting compliance recordkeeping for confined space entry permits and hot work clearances.

Engineering Design of the Servomex Micro i.s. 5100

Housed in a rugged, ergonomic enclosure measuring 160mm wide by 185mm high by 140mm deep and weighing between 1.8kg and 2.3kg depending on configuration, the Micro i.s. 5100 is built to withstand the physical demands of field use in refineries, offshore platforms, and tank farms. The analyzer is powered by a high-grade, long-life Li-Ion rechargeable battery pack delivering up to 18 hours of continuous run time, allowing extended shift coverage without mid-shift charging interruptions.

The instrument is available in multiple certified variants (5100 SV01, SV02, and user-configured builds; 5111 SV01 and SV02) to match specific hazardous-area classification and sample-conditioning requirements. An IP65-rated housing protects internal electronics from dust and water ingress, while an included protective carry bag and optional sample probe accessories round out a complete field-ready package for oxygen verification work across Oman’s industrial and marine sectors.

Key Features

  • Paramagnetic oxygen sensing technology with no consumable electrochemical cell
  • ATEX Category 1 (Zone 0), IECEx, and cus certified for the most hazardous locations
  • Measures percent-level O2 in both flammable and toxic gas samples
  • Internal sample pump with optional non-pumped (AFCD) configuration
  • Up to 18 hours of battery run time on a single charge
  • Stores up to 200 measurements for download and audit trail review
  • IP65-rated rugged enclosure with protective carry bag included
  • Compact 1.8kg – 2.3kg form factor for extended field use

Industrial Applications

The Micro i.s. 5100 is widely deployed for confined space entry verification, inert gas purging checks, and tank atmosphere testing across Oman’s oil and gas production facilities, refineries, and LNG terminals, where flammable hydrocarbon vapors and low-oxygen atmospheres frequently coexist. Its Zone 0 intrinsic safety certification makes it one of the few instruments trusted for direct measurement inside vessels and pipework sections classified as continuously hazardous, a requirement increasingly specified in permit-to-work systems across Sohar and Salalah free zone facilities.

As a trusted supplier of Servomex products, Seven Star LLC supports marine, petrochemical, and offshore operators throughout the GCC with Micro i.s. 5100 units supplied on request, calibration guidance, and help sourcing replacement parts. This genuine relationship ensures that safety-critical oxygen verification equipment deployed on Omani platforms and vessels meets both manufacturer specification and local regulatory expectations for hazardous-area instrumentation.

Technical Specifications

Model Servomex Micro i.s. 5100
Measurement Principle Paramagnetic oxygen sensor
Measured Gas Oxygen (O₂), percent level
Hazardous Area Certification ATEX Cat 1 (Zone 0), IECEx, cus
Sampling Internal pump or non-pumped (AFCD)
Data Storage Up to 200 stored measurements
Battery Internal Li-Ion rechargeable, up to 18 hours run time
Enclosure Rating IP65
Dimensions 160mm W × 185mm H × 140mm D
Weight 1.8kg – 2.3kg
Variants 5100 SV01 / SV02 / User Configured, 5111 SV01 / SV02

Why Choose Seven Star LLC for Servomex Portable Gas Analyzers

A Zone 0 intrinsically safe rating is only meaningful if the exact certified variant (SV01, SV02, or a user-configured build) matches the specific hazardous-area classification your permit-to-work system requires, since the wrong variant can leave a site technically non-compliant even though the base instrument looks identical. Seven Star LLC confirms the correct Micro i.s. 5100 variant and sampling configuration (pumped versus non-pumped AFCD) against your actual confined-space and purge-verification procedures before order confirmation, backed by our trusted Servomex suppliership across Oman and the wider GCC. We also support oil, gas, and marine operators in Muscat, Sohar, and Salalah with planning spare battery packs and calibration gas supply so field teams running frequent hazardous-area checks are never held up waiting on consumables.

Contact Seven Star LLC today to request a quotation for the Servomex Micro i.s. 5100 Portable Oxygen Analyzer with manufacturer documentation and expert technical support for hazardous-area gas measurement projects across Oman and the GCC.

Related Products

Datasheets & Documents
  • PDF Datasheet Servomex Micro i.s. 5100 Portable Oxygen Analyzer Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Servomex is a British specialist in gas analysis, founded in 1952 by Richard Steel, John Crockett and Ronald Mudie; the name comes from servomechanism. It first made electronic products, then built its first paramagnetic oxygen analyser in 1961 after work with Charles Munday on a paramagnetic sensor. Servomex is based in Crowborough, East Sussex, and is part of Spectris.

Seven Star LLC lists Servomex process, combustion, emissions and portable gas analyzers, plus accessories, and sources them for refineries, petrochemical plants and industrial gas producers in Oman.

SERVOMEX company profile

Founded 1952, United Kingdom
Founders Richard Steel, John Crockett and Ronald Mudie
Headquarters Jarvis Brook, Crowborough, East Sussex
Ownership Spectris plc, since 1999
Key technologies Paramagnetic oxygen sensing (1961), infrared analysis (1969), zirconia oxygen sensors (1981)
Product families MultiExact and SERVOPRO MultiExact analysers, SERVOTOUGH OxyExact and Oxy 1800 oxygen analysers, SERVOTOUGH Laser 3 Plus TDL analysers, SERVOFLEX portable analysers, zirconia combustion analysers

Milestones

  • 1952: Servomex is founded.
  • 1961: The first Servomex paramagnetic oxygen analyser is introduced.
  • 1981: Servomex introduces zirconia oxygen sensors.
  • 1999: Spectris acquires Servomex.

Servomex analyzer families listed

Servomex groups its analyzers under family names that indicate where they can be used. SERVOTOUGH covers analyzers built for hazardous areas and field mounting, SERVOPRO covers units for general purpose areas and analyzer houses, and SERVOFLEX is the portable line. On this page:

  • SERVOTOUGH OxyExact 2200: paramagnetic oxygen analyzer for process control and safety
  • SERVOTOUGH SpectraExact 2500: photometric analyzer for process gas components
  • SERVOTOUGH Laser 3 Plus: compact tunable diode laser analyzer for combustion
  • SERVOPRO 4900 Multigas: multi-component analyzer for emissions monitoring
  • SERVOPRO NanoTrace DF-550E: ultra-trace oxygen analyzer for high purity gases
  • SERVOFLEX Micro i.s. 5100: intrinsically safe portable oxygen analyzer

A flow alarm relay box for the 2700 flue gas analyzer is also listed.

Where Servomex gas analyzers are used

Typical duties are oxygen measurement for inerting and blanketing, vapor recovery and flare header safety, combustion control on fired heaters and reformers, purity control in air separation and electronic gases, and continuous emissions monitoring. In the GCC the main users are refining, petrochemicals, fertilizer, LNG and industrial gas plants.

SERVOMEX products we list

Family Examples
Gas Analyzer Systems SERVOPRO 4900 Multigas Analyzer, SERVOPRO NanoTrace DF-550E Ultra-Trace O…, SERVOTOUGH Laser 3 Plus Combustion TDL G…, SERVOTOUGH OxyExact 2200 Oxygen Analyzer, ServoTough SpectraExact 2500 Gas Analyzer
Portable Test & Measurement Micro i.s. 5100 Portable Oxygen Analyzer
Gas Analyzer Accessories Tough Flue Gas 2700 Flow Alarm Relay Box

Ordering Servomex analyzers and spares: what we need

A Servomex gas analyzer is built to an order code that fixes the measured gas, range, sample wetted materials, outputs and hazardous area approval. For replacements and spare parts, send the model, the serial number and the order code from the data plate. For a new Servomex oxygen analyzer or multigas unit, send the full stream composition, the component and range to be measured, sample pressure and temperature, the area classification, power supply and communication needs. We check the configuration against Servomex documentation before quoting.

Facts checked against Servomex's own 70-year history and company profiles, October 2026.

FAQ

Questions about the Servomex Micro i.s. 5100 Portable Oxygen Analyzer

Answers from our engineering team on installation, compatibility and integration.

01Is the Servomex Micro i.s. 5100 safe for use in Zone 0 hazardous areas?
Yes. The Micro i.s. 5100 is certified to ATEX Category 1 (Zone 0), IECEx, and cus standards, making it one of the few portable oxygen analyzers rated for direct measurement inside continuously hazardous locations such as vessel interiors and inert gas systems.
02What oxygen sensing technology does the Micro i.s. 5100 use?
It uses Servomex paramagnetic oxygen sensing technology, which measures the paramagnetic susceptibility of oxygen molecules without a consumable electrochemical cell, delivering stable long-term accuracy and lower running costs than galvanic O2 sensors.
03How long does the battery last on a full charge?
The internal Li-Ion rechargeable battery provides up to 18 hours of continuous run time, supporting extended field shifts for confined space entry checks and tank atmosphere testing without mid-shift recharging.
04Can the Micro i.s. 5100 store measurement data for compliance records?
Yes, the analyzer stores up to 200 measurements internally, which can be downloaded later for permit-to-work documentation, audit trails, and confined space entry compliance reporting.
05Is Seven Star LLC an experienced supply partner for Servomex portable analyzers in Oman?
Yes. Seven Star LLC supplies Servomex Micro i.s. 5100 units as an experienced supply partner serving Muscat, Sohar, Salalah, and the wider GCC, with manufacturer documentation.