Brand:

Winsonic NE31001-00200 4G LTE-A Outdoor Router

Description

Overview

The Winsonic NE31001-00200 is a ruggedized 4G LTE-A CAT6 outdoor wireless data unit purpose-built for high-speed wireless backhaul and fixed wireless access deployments where running fiber or copper to a remote site is impractical or cost-prohibitive. Housed in a weatherproof outdoor enclosure with a built-in high-gain LTE antenna, the NE31001-00200 delivers Category 6 data throughput over 2×2 or 4×4 MIMO with carrier aggregation, giving integrators a genuine cellular bridge or router alternative wherever wired connectivity cannot reach.

As the official authorized partner and exclusive regional representative for Winsonic, Seven Star LLC proudly supplies the NE31001-00200 to system integrators and telecom contractors across the Sultanate of Oman and the wider GCC. Every unit supplied through Seven Star LLC comes with Winsonic firmware and regional technical support, helping project teams in Muscat, Sohar and Salalah connect remote pumping stations, security cameras and IIoT sensors without waiting on a wired carrier build-out.

Operating Principle

The Winsonic NE31001-00200 operates as a 3GPP Release 12 LTE-A CAT6 outdoor customer-premises unit, supporting both router and bridge operation modes so it can either terminate the cellular connection and hand off routed IPv4/IPv6 traffic to downstream equipment, or act as a transparent Layer 2 bridge feeding an existing router or firewall. Its 2×2 or 4×4 MIMO antenna configuration with carrier aggregation support allows the unit to combine multiple LTE carriers for higher aggregate throughput, while the internal 3–8dBi directional antenna array focuses gain toward the serving cell tower, extending usable range in areas with marginal signal strength.

On the Winsonic NE31001-00200, power and data are delivered to the unit over a single Gigabit PoE connection, with the built-in PoE interface accepting a 48V/0.35A DC feed from the included PoE injector, so a single outdoor-rated cable carries both power and Ethernet back to the equipment cabinet. Once powered, the NE31001-00200 registers to the carrier network, negotiates its MIMO configuration automatically, and presents a standard Gigabit Ethernet interface to downstream routers, wireless access points or IP cameras, with HTTP and TR-069 remote management support letting a network operations center provision, monitor and update the unit without a truck roll.

Engineering Design of the Winsonic NE31001-00200

The Winsonic NE31001-00200 is built into an IP-rated outdoor enclosure with an integrated pole/wall mounting bracket, allowing direct installation on a mast, tower leg or building parapet without a separate weatherproof housing. The compact 330 x 250 x 85mm form factor and sub-2.5kg weight keep the unit light enough for a standard pole-mount bracket while still enclosing the LTE radio, antenna array and PoE interface in a single sealed housing rated for continuous outdoor exposure to sun, rain and dust across the Gulf climate.

Internally, the Winsonic NE31001-00200 is built around an X12 baseband processor paired with an RTL8111K Gigabit Ethernet controller, backed by 256MB of DDR memory and 256MB of NAND flash for firmware and configuration storage. A 1.8V SIM card slot (2FF) accepts a standard carrier SIM, and the unit’s PWR, LAN and LTE status LEDs, along with a three-segment signal-strength indicator, give installers immediate visual confirmation of cellular registration quality during pole-top commissioning, an important detail when the alternative is climbing back down to check a management interface. On the Winsonic NE31001-00200, lightning protection rated to ±6kV guards the unit and everything connected to it against transients induced by the LTE antenna during Gulf shamal storms.

Key Features

The Winsonic NE31001-00200 combines carrier-grade LTE-A performance with a self-contained outdoor design. Key capabilities include:

  • 3GPP Release 12 LTE-A CAT6 radio with 2×2 or 4×4 MIMO and carrier aggregation support.
  • Router and bridge operation modes, selectable to match the network architecture on site.
  • Single-cable Gigabit PoE power and data delivery via included 48V/0.35A DC injector.
  • L2TP VPN client support for secure backhaul to a central network operations center.
  • HTTP and TR-069 remote management for zero-truck-roll provisioning and monitoring.
  • Built-in 3–8dBi directional antenna array with integrated high-gain LTE antenna.
  • Weatherproof outdoor enclosure with integrated pole/wall mounting bracket.
  • Lightning protection rated to ±6kV for exposed rooftop and mast installations.

Industrial Applications

The Winsonic NE31001-00200 is deployed to bring connectivity to remote pumping stations, RO desalination intake points, perimeter security cameras and agricultural IIoT sensor clusters across Oman and the GCC, wherever a site sits beyond the reach of fiber or leased-line infrastructure but still needs a reliable Gigabit-class data connection. Telecom operators and system integrators also use the Winsonic NE31001-00200 as a fixed wireless access CPE, extending 4G broadband to villages, labor camps and remote industrial sites across the Sohar and Salalah economic zones where wired last-mile infrastructure is not economically viable.

As the officially authorized partner for Winsonic, Seven Star LLC distributes the NE31001-00200 to EPC contractors building temporary or permanent connectivity for construction sites, oil and gas remote monitoring points, and coastal desalination facilities throughout the Gulf, where the unit’s outdoor rating and single-cable PoE installation dramatically simplify deployment compared to running structured cabling to an isolated site. Facility operators standardizing on cellular backhaul for redundancy or primary connectivity consistently select the NE31001-00200 for its CAT6 throughput and dual router/bridge flexibility.

Technical Specifications

The table below summarizes the core specifications of the Winsonic NE31001-00200 4G LTE outdoor router.

Parameter Specification
Model NE31001-00200
Chipset X12 + RTL8111K
Memory 256MB DDR / 256MB NAND Flash
Radio Access 3GPP Release 12, Category 6
Frequency Bands LTE FDD: B1/3/5/7/8/20/28, LTE TDD: B38/40/41, WCDMA: B1/3/5/8
MIMO Configuration 2×2 or 4×4 MIMO, carrier aggregation support
LTE Data Rate FDD: DL 300Mbps / UL 50Mbps; TDD: DL 226Mbps / UL 28Mbps
Output Power 23dBm ± 2dBm
Antenna 3–8dBi internal directional antenna
Data Interface 1 x RJ45 10/100/1000Mbps Gigabit PoE
SIM Support 1.8V SIM card slot (2FF)
Power Supply 48V/0.35A DC (Gigabit PoE)
Power Consumption < 10W
Operation Modes Router, Bridge
Management HTTP, TR-069
Lightning Protection ±6kV
Dimensions (H x W x D) 330 x 250 x 85 mm
Weight < 2.5 kg

Request a Quote for Winsonic NE31001-00200

Seven Star LLC supports formal RFQ submissions, confirms lead time at quotation, and provides the full Winsonic technical datasheet for the NE31001-00200 on request. As the authorized partner for Winsonic in Oman and the GCC, our instrumentation and industrial networking division is ready to help design the right cellular backhaul or fixed wireless access solution for your remote site, with delivery available across Muscat, Sohar, Salalah and the broader Gulf region.

Browse the full Winsonic range or see more Industrial Communications products supplied by Seven Star LLC in Oman and the GCC.

Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Rail-grade Ethernet switches with M12 connectors, industrial cellular routers and panel PCs are the Winsonic products buyers ask us for most. Winsonic is known as a maker of industrial LCD monitors and touch displays, and the products listed here add networking and computing hardware for places where office equipment does not survive: trains and buses, roadside cabinets, pump stations and factory floors.

Seven Star LLC is the Winsonic agency for Oman and the GCC and lists Winsonic EN 50155 switches, 4G and 5G routers and gateways, SFP transceivers, panel PCs and rack mount monitors.

Winsonic product families

The M12 switches on this page are specified to EN 50155, the standard for electronic equipment on rail vehicles. Listed models include the L2 managed NE10002 and the NE10003 in IP68 housings, the unmanaged NE10004 with 10G ports and IP65 sealing, the unmanaged NE10005 and the 5-port IP68 NE10006, with PoE+ or PoE++ ports depending on the model. On the cellular side the listing covers NE24 series industrial cellular routers and edge gateways, the NE20001 vehicle-grade 5G transit gateway and the NE31001 outdoor LTE-A router. WSFP Gigabit SFP transceivers provide the fiber uplinks. Computing and display products include the PZB zero bezel panel PC and the RM rack mount monitor, next to the flush mount and zero bezel LCD monitors Winsonic builds for industrial use.

Winsonic series at a glance

Series Use Models listed on this site
EN 50155 M12 switches Rail-grade switches with M12 connectors, IP65 or IP68, PoE+ or PoE++ NE10001, NE10002, NE10003, NE10004, NE10005, NE10006
Industrial Ethernet switches L3 and L2 managed ring switches and unmanaged switches, with PoE and SFP or SFP+ uplinks NE11001, NE11002, NE11003, NE11004, NE11005, NE11006, NE11007, NE11008, NE11009
Cellular VPN routers Industrial 4G and 5G routers, single or dual SIM NE21001, NE22001, NE22002, NE22003, NE22004, NE22005, NE22006, NE22007
Gateways 5G EN 50155 transit gateway, edge computing and energy gateways NE20001, NE24001, NE24002, NE24003, NE24004, NE24005
Outdoor and indoor routers LTE-A outdoor router and AX3000 WiFi router NE31001, NE31002
SFP and SFP+ transceivers Gigabit, SONET/SDH and 10G optical modules WSFP-C7-M85, WSFP-C7-S13, WSFP-C8-S35, WSFP-C8-S53, WSFP-E7-S13, WSPP-H7-M85, WSPP-H7-S13
Panel PCs and monitors 32 inch zero bezel panel PC and 27 inch 4K rack mount monitor PZB32014, RM2705

Where Winsonic equipment is used

Typical uses are on-board networks for trains, metro cars and buses, wayside cabinets, traffic management, remote pump stations and water plants, energy metering at unmanned sites, and machine monitoring and operator stations in factories.

Ordering Winsonic switches and routers: what we need

Send the complete part number, including the digits after the hyphen, because they separate variants of the same base model. Where you are still selecting, give us:

  • port count, port speed and connector type (M12 coding or RJ45)
  • PoE power needed per port and the supply voltage available
  • managed or unmanaged operation, and the IP rating required
  • for routers: mobile operator, SIM count, serial or Ethernet interfaces
  • for panel PCs: screen size, touch type, processor and mounting

Series and model data on this page come from the Winsonic product pages and manufacturer documents published on omansevenstar.com.

FAQ

Questions about the Winsonic NE31001-00200 4G LTE-A Outdoor Router

Answers from our engineering team on installation, compatibility and integration.

01What is the main use case for the Winsonic NE31001-00200?
The NE31001-00200 is an outdoor LTE-A CAT6 CPE designed to bring Gigabit-class connectivity to remote sites such as pump stations, security cameras and IIoT sensor clusters where fiber or copper infrastructure is not economically available.
02How is the NE31001-00200 powered and installed?
The unit is powered and networked over a single Gigabit PoE cable from a 48V/0.35A DC injector, and mounts directly to a pole or wall using its integrated bracket, removing the need for separate power cabling at an outdoor installation site.
03Can the NE31001-00200 operate as a bridge instead of a router?
Yes. The unit supports both router and bridge operation modes, so it can either terminate and route the cellular connection itself or act as a transparent Layer 2 bridge feeding an existing router or firewall downstream.
04What LTE bands and MIMO configurations does the NE31001-00200 support?
The unit supports 3GPP Release 12 Category 6 LTE-A across FDD bands B1/3/5/7/8/20/28 and TDD bands B38/40/41, with selectable 2x2 or 4x4 MIMO and carrier aggregation for higher aggregate throughput.
05Is Seven Star LLC an authorized representative for Winsonic products?
Yes, Seven Star LLC is the officially authorized partner and exclusive regional representative for Winsonic in Oman and the GCC, supplying genuine hardware and local technical support for the full NE31001-00200 range.